Farenheit EFM-01 User manual

Digital
FM StereoModulator
Multi-Channel PLL Synthesizer
MODEL : EFM-01
OWNER'S MANUAL

FEATURE
High reliabilityPLLsynthesizedtuning system
Provide 8 carrierfrequencies
Highisolationfrom nonessentialfrequencies
Compactand light, Can be placed behindthe radio insidethe dashboard.
SPECIFICATIONS
Designand specificationsare subject to change without notice.

WARNING TO REDUCETHE RISK OF FIREOR ELECTRIC SHOCK.
DO NOT EXPOSETHIS PRODUCTTO RAINOR MOISTURE.
CAUTION TO PREVENT ELECTRICSSHOCK MATCH POLRAITYOF
POWER SOURCE, USE DC12V OFCAR BATERYONLY.
IMPORTANT SAFETY INSTRUCTIONS
This unitisfully transistorizedand does not containany parts
that can be repairedby the user.
DO NOTREMOVETHE CABINET COVER, OR YOU MAY BE EXPOSED
TO DANGEROUSVOLTAGE. REFER SERVICING TO QUALIFIEDSERVICE
PERSONNELONLY.
1. Read owner' s manual
After unpackingthis unit readthe owner's manual
carefully,andfollow all the operatingand other instructions.
2. Powersources
This product shouldbe operatedonly from the type of powersource
indicatedon the markinglabel. If you are not sure of the type of
power supply in your circumference,consultyour productdealer.

3. Heat
The productshould be situatedaway from heat sourcessuch as radiators,
heat registeror other products(includingamplifiers)that produceheat.
4. Water and Moisture
Do not usethis productnear water-forexample, neara bathtub,
wash bowl, kitchensink, or laundrytub in a wet basement
or near a swimmingpooland the lake.
5. Object and Liquid entry
Never push objectsof any kind intothis productthrough openingsasthey
may touch dangerousvoltage pointsor short-outpartsthat could result
ina fire or electricshock. Never spil liquidof any kindon the product.
6. Burden
Do not placea heavy objecton or step on the product.The object may fall,
causingserious personalinjuryand serious damage to the product.
7. Connecting
When you connectthe productto other equipment, turn off the power and
unplugall of the equipmentfrom the outlet. Failureto do so maycause an
electricshock and serious personalinjury. Readthe owner' s manualof the
other equipmentcarefullyandfollow the instructionswhen marking
any connections.

CONNECTING TO CAR FM RADIO SYSTEM
FM Stereo Modulator
Mull-Channel PLL Synlhesller
1. ConnectGROUNDterminal(@). then connect the terminal of fuse cable(@)
to DC 12V which to be suppliedwhen you turn on your instruments.
Cut and deleteterminal(Q)if you do not use it. It may causeeletric short
if you leaveas it is, so you may be exposedto any riskor accidents.
2. Connect AUDIO INPUTjack(@)fromaudio output jack of audio sources.
VCR, CD player,
DVD, MD, etc,. This unit is preparedfor stereo sound.
whitecolorjack is for LEFT soundand red colorjack isfor RIGHTsound.
3. Connect FROMANTENNA inputjack(@)from an outside FMantenna.
4. Connect TO TUNER antennaplug(@)toantennainputjack of FM tuner
on your car.
5. Set this unit(8)behind the FM radioinsidethe dashboard.

-HOWTO SETm FREQUENCY
You can set the FM carrierfrequencywhich can be use inyour car FM tuner
by setting DIP switchthat it is locatedon bottomside.
Howto set FM carrierfrequenciesare as follows.
88.5 MHz 88.7 MHz 88.9 MHz 89.1 MHz
89.3 MHz 89.5 MHz 89.7 MHz 89.9 MHz
r Pin 1 is not available.