FDT LP150X501x-FNR User manual

This product is RoHS compliant
FLAT DISPLAY TECHNOLOGY
This product is RoHS compliant
Copyright © 2014 FLAT Display Technology Corporation. All rights reserved.
Add: No.85, Sec. 1, Fuxing Rd., South Dist., Taichung City 402, Taiwan (R.O.C.) http:// www.fdt.com.tw E-mail: [email protected]
Tel: [phone], Fax: [phone]
§SPECIFICATION APPROVAL SHEET §
LP150X501x-FNR
15” Digital TFT-LCD Module
SAS-1404009
0.1
June 19, 2014
※This approval sheet contains 25 pages including the cover and appendix.
14

LP150X501x-FNR 2014 06 19 V0.1
P.1
Copyright © 2014 FDT http:// www.fdt.com.tw, E-mail- [e-mail]
This technical specification is sub
j
ect to chan
g
e without notice
1.General Description
1.1 Features
■15” (1024x768) Digital TFT LCD
■Aspect Ratio: 4:3
■Input Signal VGA / DVI-D/ HDMI 1.3a
■Maximum Support Resolution 1920x1080
■Stereo Audio Amplifier, Output 2W@4ΩSpeaker
■Audio Line-In / Line-Out (Optional)
■5 Wires Resistive Touch Panel
■5 Key Buttons Control
■UART / RS232 Serial Remote Control (Optional)
■8 Language OSD Menu
■Light Sensor (Optional)
■LED Backlight
■Single Operation Voltage +12V
1.2 Applications
■Industrial
■Medical Environment
■Instrument Display
■Kiosk
■Security
■Signage
■Office Electronics
■Home Application
■Educate Application

LP150X501x-FNR 2014 06 19 V0.1
P.2
Copyright © 2014 FDT http:// www.fdt.com.tw, E-mail- [e-mail]
This technical specification is sub
j
ect to chan
g
e without notice
2. Contents
Contents Page
1. General Description…………………………………………………………………………………….……………. 1
1.1 Features 1
1.2 Applications 1
2.Contents……………….……………………………………………………………...…………………………….…. 2-3
3 .Specifications………..………………………………………….………………..…………………………………… 4
4. Black Diagram………………………………………………………………….………………………………….…. 4
5. TFT-LCD Information………………………………………………………………………………….……………. 5
5.1 TFT-LCD Mechanical Specifications 5
5.2 TFT-LCD Optical Characteristics 5
6. Order Information…..………………...……………………………………………………………………………… 6
6.1 Unit 6
7. Dimension Information………………………………………………………………………………………………. 7-9
7.1 Unit (LP150X5010-FNR) 7
7.2 Unit (LP150X501U-FNR) 8
7.3 Unit (LP150X501R-FNR) 9
8. Pin Description……………………………………………………………………………………………………….. 10-14
8.1 J103 : Pin Assignment of Power Input (DC Jack Inside Diameter:2.1ψOutside Diameter:5.5ψSide Entry Type) 10
8.2 J702 : Pin Assignment of UART (Pitch 1.25mm 4Pin, Top Entry Type) 10
8.3 J503 : Pin Assignment of Analog RGB Input ( D-Sub 15Pin) 10
8.4 J401：Pin Assignment of DVI-D (24 Pin) 11
8.5 J402：Pin Assignment of HDMI-A Type Input (HDMI 1.3a -19Pin Female) 12
8.6 J602A：Pin Assignment of Key Board (Pitch 1.25mm 12Pin , Side Entry Type) 12
8.7 J303：Pin Assignment of Spear Left (Pitch 2.0mm 2Pin , Top Entry Type) 13
8.8 J302 : Pin Assignment of Spear Right (Pitch 2.0mm 2Pin , Top Entry Type) 13
8.9 J701：Pin Assignment of Touch USB (USB A Type - Female 2.0mm, Side Entry Type )(Option) 13
8.10 J705：Pin Assignment of Touch RS232 (D-Sub 9 Female)(Option) 13
8.11 J301：Pin Assignment of Line-In/Out (Option) (Outside Diameter:3.5ψSide Entry Type) 14
9. Absolute Maximum Ratings………………………………………………………………………………...………... 14
9.1 Absolute Maximum Ratings 14
10. Recommended Operating Conditions……………………………………………………………………...……… 14
10.1 Electrical Characteristics 14
10.2 VGA Mode Characteristics 14
11. 5W Resistive Touch Panel Characteristics………….……………………………………………………… 15-18
11.1 Electrical Performance 15
11.2 Optical Performance 15
11.3 Mechanical Performance 15

LP150X501x-FNR 2014 06 19 V0.1
P.3
Copyright © 2014 FDT http:// www.fdt.com.tw, E-mail- [e-mail]
This technical specification is sub
j
ect to chan
g
e without notice
11.4 Durability Performance 15
11.5 5W Resistive Touch Panel Operation System Support 16
11.6 Resistive Touch Panel Integration Design Guide 17
11.7 Mechanical Design Notice For Resistive Touch Panel 18
12. Operation manual / Connection……………………………………………………………………………………. 19
12.1 Driver Board Manual 19
13. Accessories (Option)……………………………………………………………………………………………….. 20
14. Key Function by OSD……………………………………………………………………………………………….. 21-24
14.1 Menu Operation 21-24

LP150X501x-FNR 2014 06 19 V0.1
P.4
Copyright © 2014 FDT http:// www.fdt.com.tw, E-mail- [e-mail]
This technical specification is sub
j
ect to chan
g
e without notice
3. Specifications
4. Block Diagram
LCD Input Signal
Panel Size 15” VGA D-Sub15
Resolution (Pixels) 1024x768 DVI DVI-D
Color 16.7M HDMI 1.3a
Luminance w/o RTP 400 cd/㎡Audio
Luminance (RTP) 320 cd/㎡Amplifier 1W@8Ω/ 2W@4Ω
Luminance (PCT) 335 cd/㎡Line-In Stereo Input Phone Jackψ3.5
Contrast Ratio 700 Controls
Viewing Angle 80 / 80 / 70 / 70 Key 5 Buttons
Backlight Life Time (LED) 50K (Min) Serial Remote Control UART / RS232 (Optional)
Power Requirement Environment
Power Input (DC Jack 2.1ψ)+12 VDC Operating Temp. w/o RTP -20 ~ +70℃
PowerConsumption@+12V 11.4 Watts (@Without Amplifier) Storage Temp. w/o RTP -40 ~ +85℃
Touch Screen Operating Temp. 5W RTP -10 ~ +70℃
Resistive Type USB / RS232 Interface Storage Temp. 5W RTP -30 ~ +70℃
Resistive Type Support OS Windows / Linux / DOS / Mac / QNX Operating Temp. PCT -20 ~ +70℃
Projected Capacitive Touch USB Interface ( 2 Points ) Storage Temp. PCT -20 ~ +70℃
Projected Capacitive
Touch Support OS Windows / Android / Linux

LP150X501x-FNR 2014 06 19 V0.1
P.5
Copyright © 2014 FDT http:// www.fdt.com.tw, E-mail- [e-mail]
This technical specification is sub
j
ect to chan
g
e without notice
5. TFT-LCD Information
5.1 TFT-LCD Mechanical Specifications
Parameter Specifications Unit
Screen Size 15 (diagonal) Inch
Display Format 1024 x (R.G.B) x 768 Dot
Active Area 304.1(H) x 228.1(V) mm
Pixel Pitch 0.297(H) x 0.297(V) mm
Pixel Arrangement RGB vertical stripe
Surface Treatment Anti-Glare, Haze=25%, Hard Coating (3H)
5.2 TFT-LCD Optical Characteristics
Parameter Symbol Condition Min Typ Max Unit Remark
Left 70 80 --- deg
Horizontal Right 70 80 --- deg
Top 55 70 --- deg
Viewing Angle
Vertical Bottom
CR >10
60 70 --- deg
Contrast Ratio CR At optimized
Viewing angle 450 700 --- ---
Luminance w/o RTP L 300 400 --- cd/㎡
Backlight Life Time (LED) 25℃50000 --- --- Hrs

LP150X501x-FNR 2014 06 19 V0.1
P.6
Copyright © 2014 FDT http:// www.fdt.com.tw, E-mail- [e-mail]
This technical specification is sub
j
ect to chan
g
e without notice
6. Order Information
6.1 Unit
Note: 1.The assembling of panel and bracket is aimed for delivery, packaging and experiment. If the demand of shockproof and long-term fix, pls have it into
consideration of mechanism design.

Parameter LP150X5010-FNR LP150X501U-FNR LP150X501R-FNR
VGA ◎◎◎
DVI ◎◎◎
HDMI ◎◎◎
Touch Panel Type - 5W Resistive 5W Resistive
Touch Screen Interface - USB RS232
Audio Amplifier ◎◎◎
Audio Line-In ◎◎◎
5 Keys ◎◎◎
UART Remote Control ◎◎◎
Optional Functions
Parameter
- Audio Line-Out
- RS232 Remote Control
- Light Sensor
- Accessories (Refer to Page 20)

LP150X501x-FNR 2014 06 19 V0.1
P.7
Copyright © 2014 FDT http:// www.fdt.com.tw, E-mail- [e-mail]
This technical specification is sub
j
ect to chan
g
e without notice
7. Dimension Information
7.1 Unit (LP150X5010-FNR)

LP150X501x-FNR 2014 06 19 V0.1
P.8
Copyright © 2014 FDT http:// www.fdt.com.tw, E-mail- [e-mail]
This technical specification is sub
j
ect to chan
g
e without notice
7.2 Unit (LP150X501U-FNR)

LP150X501x-FNR 2014 06 19 V0.1
P.9
Copyright © 2014 FDT http:// www.fdt.com.tw, E-mail- [e-mail]
This technical specification is sub
j
ect to chan
g
e without notice
7.3 Unit (LP150X501R-FNR)

LP150X501x-FNR 2014 06 19 V0.1
P.10
Copyright © 2014 FDT http:// www.fdt.com.tw, E-mail- [e-mail]
This technical specification is sub
j
ect to chan
g
e without notice
8. Pin Description
8.1 J103 : Pin Assignment of Power Input (DC-Jack Inside Diameter:2.1 ψ Outside Diameter:5.5 ψ Side Entry Type)
Pin No. Symbol I/O Description Remark
1DC-In I +12Vdc Input Voltage
2GND - Power Ground
8.2 J702 : Pin Assignment of UART (Pitch 1.25mm 4Pin, Top Entry Type)
※FDT Connector Part No.: MS24014 (STM) [Same as 53398-0471 (MOLEX)] ;
※FDT Matching Connector Part No.: P24014 (STM) [Same as 51021-0400 (MOLEX)].
Pin No. Symbol I/O Description Remark
1TX / RS232 TX (Option) O UART / RS232 (Option) Transmission Data
2RX / RS232 RX (Option) I UART / RS232 (Option) Receive Data
3 GND - Ground
4 +3.3Vdc O +3.3Vdc Output Voltage
Note: All Functions can be controlled by UART , About UART command list please contact FDT sales.
8.3 J503 : Pin Assignment of Analog RGB Input ( D-Sub 15Pin)
Pin No. Symbol I/O Description Remark
1RI+ I Analog Red Signal
2GI+ I Analog Green Signal
3 BI+ I Analog Blue Signal
4 GND - Ground
5 VGA-Det I VGA Detect
6 AGND - Analog Ground
7 AGND - Analog Ground
8 AGND - Analog Ground
9 VGA5V - VGA +5Vdc Input
10 GND - Ground
11 GND - Ground
12 VGA_SDA - DDC2 Data
13 HS_IN I TTL Horizontal sync.
14 VS_IN I TTL Vertical sync.
15 VGA_SCL - DDC2 Clock

LP150X501x-FNR 2014 06 19 V0.1
P.11
Copyright © 2014 FDT http:// www.fdt.com.tw, E-mail- [e-mail]
This technical specification is sub
j
ect to chan
g
e without notice
8.4 J401 ： Pin Assignment of DVI-D (24 Pin)
Pin No. Symbol I/O Description Remark
1DATA2- I Negative DVI Input for A Link Data Channel 2
2DATA2+ I Positive DVI Input for A Link Data Channel 2
3 GND - Ground
4 NC - No Connection
5 NC - No Connection
6 DVI_SCL I DDC2 Clock
7 DVI_SDA I DDC2 Data
8 NC - No Connection
9 DATA1- I Negative DVI Input for A Link Data Channel 1
10 DATA1+ I Positive DVI Input for A Link Data Channel 1
11 GND - Ground
12 NC - No Connection
13 NC - No Connection
14 DVI5V I DVI +5Vdc Input
15 DET_DVI I DVI Detect
16 DVI_HPD - Hot Plug Detect
17 DATA0- I Negative DVI Input for A Link Data Channel 0
18 DATA0+ I Positive DVI Input for A Link Data Channel 0
19 GND - Ground
20 NC - No Connection
21 NC - No Connection
22 GND - Ground
23 DCLK+ I Positive DVI Input for A Link Clock Channel
24 DCLK- I Negative DVI Input for A Link Clock Channel

LP150X501x-FNR 2014 06 19 V0.1
P.12
Copyright © 2014 FDT http:// www.fdt.com.tw, E-mail- [e-mail]
This technical specification is sub
j
ect to chan
g
e without notice
8.5 J402 ： Pin Assignment of HDMI-A Type Input (HDMI 1.3a -19Pin Female)
8.6 J602A
： Pin Assignment of Key Board (Pitch 1.25mm 12Pin , Side Entry Type)
※FDT Connector Part No.: MS240112R (STM) [Same as 53261-1219 (MOLEX)] ;
※FDT Matching Connector Part No.: P240112 (STM) [Same as 51021-1200 (MOLEX)].
Pin No. Symbol I/O Description Remark
1- -
Don’t Connect
2 SW5 I
EXIT
3 SW4 I
DOWN
4 SW3 I
UP
5 SW2 I
MENU / S
6 SW1 I
POWER / SOURCE
7 GND - Ground
8 VDDP - VDDP +3.3Vdc Output Voltage
9 - - Don’t Connect
10 RED O Indicator red LED for power off control
11 GREEN O Indicator green LED for power on control
12 GND - Ground
Pin No. Symbol I/O Description Remark
1DATA2+ I Positive HDMI Input for B Link Data Channel 2
2DET_HDMI - HDMI Detect
3 DATA2- I Negative HDMI Input for B Link Data Channel 2
4 DATA1+ I Positive HDMI Input for B Link Data Channel 1
5 GND - Ground
6 DATA1- I Negative HDMI Input for B Link Data Channel 1
7 DATA0+ I Positive HDMI Input for B Link Data Channel 0
8 GND - Ground
9 DATA0- I Negative HDMI Input for B Link Data Channel 0
10 DCLK+ I Positive HDMI Input for B Link Clock Channel
11 GND - Ground
12 DCLK- I Negative HDMI Input for B Link Clock Channel
13 NC - No Connection
14 NC - No Connection
15 HDMI_SCL I DDC2 Clock
16 HDMI_SDA I DDC2 Data
17 GND I DDC/CEC Ground
18 HDMI5V I HDMI +5Vdc Input
19 HDMI_HPD I Hot Plug Detect

LP150X501x-FNR 2014 06 19 V0.1
P.13
Copyright © 2014 FDT http:// www.fdt.com.tw, E-mail- [e-mail]
This technical specification is sub
j
ect to chan
g
e without notice
8.7 J303 ： Pin Assignment of Spear Left (Pitch 2.0mm 2Pin , Top Entry Type)
※FDT Connector Part No.: A2001WV2-2P(JWT) ;
※FDT Matching Connector Part No.: A2001H02-2P(JWT) .
Pin No. Symbol I/O Description Remark
1+LOUT O Left Speaker Out+
2-LOUT O Left Speaker Out -
8.8 J302 : Pin Assignment of Spear Right (Pitch 2.0mm 2Pin , Top Entry Type)
※FDT Connector Part No.: A2001WV2-2P(JWT) ;
※FDT Matching Connector Part No.: A2001H02-2P(JWT) .
Pin No. Symbol I/O Description Remark
1+ROUT O Right Speaker Out+
2-ROUT O Right Speaker Out-
8.9 J701
： Pin Assignment of Touch USB (USB A Type - Female 2.0mm, Side Entry Type )(Option)
Pin No. Symbol I/O Description Remark
1VBUS - USB VCC
2D- - DATA (-)
3 D+ - DATA (+)
4 DGND - Digital Ground
8.10 J705
： Pin Assignment of Touch RS232 (D-SUB 9 Male)(Option)
Pin No. Symbol I/O Description Remark
1- - Don’t Connect
2RXD I Receive Data
3 TXD O Transmit Data
4 - - Don’t Connect
5 GND - Ground
6 NC - No Connection
7 NC - No Connection
8 - - Don’t Connect
9 - - Don’t Connect

LP150X501x-FNR 2014 06 19 V0.1
P.14
Copyright © 2014 FDT http:// www.fdt.com.tw, E-mail- [e-mail]
This technical specification is sub
j
ect to chan
g
e without notice
8.11 J301 ： Pin Assignment of Line-In/Out (Option) (Outside Diameter:3.5 ψ Side Entry Type)
9. Absolute Maximum Ratings
9.1 Absolute Maximum Ratings
Parameter Symbol Min Max Unit Remark
Input Voltage Vin 11 13.5 V
Analog RGB Input Signal Analog RGB in 0.5 2.0 Vp-p
Digital Input Signal TTL 0.3 3.6 V
DVI Input Signal - 165 MHz
HDMI Input Signal - 165 MHz
Line-in 1.8 Vp-p
Operating Temp. w/o TP -20 +70
℃
Storage Temp. w/o TP -30 +70
℃
Operating Temp. 5W RTP -10 +70
℃
Storage Temp. 5W RTP -30 +70
℃
10. Recommended Operating Conditions
10.1 Electrical Characteristics
Parameter Symbol I/O Min Typ Max Unit Note
Input Voltage DC-in I +11.5 12 +13 V
Total Current I-in I 950 mA +12V
Power Consumption I 11.4 W
@Without
Amplifier
Output Voltage VDD O 3.2 3.3 3.4 V
Analog RGB Input Signal Analog RGB in RGB I 0.7 Vp-p @75Ω
DVI Input Signal 165 MHz
HDMI Input Signal 165 MHz
10.2 VGA Mode Characteristics
Dots per inch H Unit Polarity V Unit Polarity Note
640 x 480 31.47 KHz Positive 59.9 Hz Positive
800 x 600 37.88 KHz Positive 60.3 Hz Positive
1024 x 768 48.36 KHz Positive 60 Hz Positive
1280 × 1024 63.98 KHz Positive 60 Hz Positive
1600 × 1200 75 KHz Positive 60 Hz Positive
1920 × 1080 67.5 KHz Positive 60 Hz Positive

LP150X501x-FNR 2014 06 19 V0.1
P.15
Copyright © 2014 FDT http:// www.fdt.com.tw, E-mail- [e-mail]
This technical specification is sub
j
ect to chan
g
e without notice
11. 5W Resistive Touch Panel Characteristics
11.1 Electrical Performance
Parameter Symbol Min Typ Max Unit Note
X 20 500 Ω
Terminal Resistance Y 20 500 Ω
Linearity 1.5 %
Insulation Impedance 20 MΩDC 25V
Response Time
15 ms
11.2 Optical Performance
Parameter Specifications
Light Transmittance 80% ±2%
Haze < 9.5%±2%
11.3 Mechanical Performance
Parameter Specifications
Input Method Stylus or Finger
Operating Force R0.8 Silicon Rubber, < 50gf
Surface Hardness 3H pencil, pressure 1N/45°
11.4 Durability Performance
Parameter Specifications
Knock Test 10,000,000 times

LP150X501x-FNR 2014 06 19 V0.1
P.16
Copyright © 2014 FDT http:// www.fdt.com.tw, E-mail- [e-mail]
This technical specification is sub
j
ect to chan
g
e without notice
11.5 Resistive Touch Panel Operation System Support
OS Version Interface
Windows Vista, XP / 200, 9x / ME
Windows Embedded
Windows 7
Windows 8 / 8.1
RS232 / USB
Windows
Windows NT4 RS232
Kernel 2.4.x (x86 32bit)
Kernel 2.6.x Upwards (x86 32 / 64bit )
Kernel 2.6.24 Upwards (ARM , MIPS)
RS232 / USB
Linux
Android 1.5 / 1.6 / 2.x / 4.x – Google RS232 / USB
DOS DOS RS232
Mac Mac OS9, Mac OS X (IBM, Intel CPU) USB
QNX QNX RTOS v6.3 RS232 / USB

LP150X501x-FNR 2014 06 19 V0.1
P.17
Copyright © 2014 FDT http:// www.fdt.com.tw, E-mail- [e-mail]
This technical specification is sub
j
ect to chan
g
e without notice
11.6 Resistive Touch Panel Integration Design Guide
Avoid the design that Front-case overlap and press on the active area of the touch-panel.
Give enough gap (over 0.5mm at compressed) between the front case and touch-panel to protect wrong operating.
Use a buffer material (Gasket) between the touch-panel and front-case to protect damage andwrong operating.
Avoid the design that buffer material overlap and press on the inside of touch-panel viewing area.

LP150X501x-FNR 2014 06 19 V0.1
P.18
Copyright © 2014 FDT http:// www.fdt.com.tw, E-mail- [e-mail]
This technical specification is sub
j
ect to chan
g
e without notice
11.7 Mechanical Design Notice For Resistive Touch Panel
Correct Installation Incorrect Installation

LP150X501x-FNR 2014 06 19 V0.1
P.19
Copyright © 2014 FDT http:// www.fdt.com.tw, E-mail- [e-mail]
This technical specification is sub
j
ect to chan
g
e without notice
12. Operation manual / Connection
12.1 Driver Board Manual
DC-In