FDT LCM070W 000R Series User manual

FLAT DISPLAY TECHNOLOGY
■LCM070Wxx-000R V0.0
Copyright 2008 FDT E-mail- [email protected]
add: NO.85, FuHsing Road, Sec.1,South Dist., TaiChung City 402 TAIWAN R.O.C Tel: [phone] Fax: [phone]
This technical specification is subject to change without notice
1
FLAT DISPLAY TECHNOLOGY
This product is RoHS compliant
SPEC No.: SAS-0810004
Version: 0.0
Issue Date: October 27 2008
1. Introduction:
1.1 About the Product
The LCM070Wxx-000R 7” Chassis Monitor series are rugged, high performance Industrial LCD Monitors,
designed for commercial and industrial applications, such as kiosks, arcade games, ATM Machines,
aviation simulators, military, medical, marine, security, industrial equipment, and instrumentation
equipment. This product can provide high brightness and contrast to achieve better viewing effect.
1.2 Features
■7 inch WVGAActive Matrix Color TFT LCD Monitor
■High Contrast 400:1 Typical
■Recommend resolution:800×480(WVGA)
■OSD controls: Allow on-screen adjustments of Brightness, Contrast, RGB Auto Color Balance,
H-Position, V-position
■Multi system Video Input
■Signal loss backlight will be off / signal feed again backlight will be on
■Quick and easy integrations for Client solutions
■Universal AC Power input and auto detection video system.
■PMMA ( Poly Methyl MethAcrylate ) protection (Hard Coating + Anti Glare) (option)
■Touch screen (option)
■Sunlight readable (option)
7” Chassis Monitor
Model Number: LCM070Wxx-000R

FLAT DISPLAY TECHNOLOGY
■LCM070Wxx-000R V0.0
Copyright 2008 FDT E-mail- [email protected]
add: NO.85, FuHsing Road, Sec.1,South Dist., TaiChung City 402 TAIWAN R.O.C Tel: [phone] Fax: [phone]
This technical specification is subject to change without notice
2
2. Contents
Contents Index Page
1. Introduction…………………………………………………………………………………………………
…
1
1.1 About the product 1
1.2 Features 1
2. Contents.……………………………….…………………………………………………………………….. 2
3. Specifications………….……….…………………………………...…..…………………………………… 3
4. Ordering Information…………………………………………………………………………………….…. 4
5. VGA Input Format…………………………………………………………………….…………………….. 4
6. Mechanical Drawing…………………………………………………………………………………….….. 5-7
6.1 LCM070W03-000R 5
6.2 LCM070W5U-000R 6
6.3 LCM070W5R-000R 7
7. Packing List……………………………………………………………………………….………………... 8
8. Installing the Monitor………………...……………………………………………….……………………. 9
8.1 Power Cable Connection 9
8.2 VGA Signal Cable Connection 9
8.3 Video / S-Video Cable Connection 9
8.4 Switch On The Power 9
9. OSD Control…...…………………………………………………………………….…………………….… 10~12
9.1 Menu Operation 10~11
9.2 Operations 12
10. Trouble Shooting…………...……………………………………………………..……….……………….. 13

FLAT DISPLAY TECHNOLOGY
■LCM070Wxx-000R V0.0
Copyright 2008 FDT E-mail- [email protected]
add: NO.85, FuHsing Road, Sec.1,South Dist., TaiChung City 402 TAIWAN R.O.C Tel: [phone] Fax: [phone]
This technical specification is subject to change without notice
3
3. Specifications
Parameter Specifications Unit Remark
Model Name LCM070Wxx-000R
Screen Size 7” (diagonal) inch
Display Format 800 x (R.G.B) x 480 dot
Display Color 262,144 colors
TFT-LCD Active Area 152.4(H) x 91.44(V) mm
Pixel Pitch 0.1905(H) x 0.1905(V) mm
Contrast Ratio 400:1(Typ.)
Brightness 400(Typ.) Cd/m²
Viewing Angle -60 ~ +60(H); -55 ~ +40(V)(Typ.) deg
Outline Dimension 172.6 (W) x 110.0 (H) x 40.0 (D) mm
Input/Output Interface
D-Sub 15 pin female for VGA /
USB for Touch Screen Driver
USB or RS-232 (DB9 Female) for Touch Screen Driver (Option)
Power Source 100-240VAC 50-60Hz, Universal / +12VDC @ 3A
Power Consumption < 5.3W
Touch Screen Controller 5 wire Resistive Driver USB/ RS232 (Option)
Operating Temperature -10 ~ +60 ℃
Storage Temperature -20 ~ +70 ℃
Lamp Life Time 30000(Min.) hr

FLAT DISPLAY TECHNOLOGY
■LCM070Wxx-000R V0.0
Copyright 2008 FDT E-mail- [email protected]
add: NO.85, FuHsing Road, Sec.1,South Dist., TaiChung City 402 TAIWAN R.O.C Tel: [phone] Fax: [phone]
This technical specification is subject to change without notice
4
4. Ordering Information
Parameter LCM070W03-000R LCM070W5U-000R LCM070W5R-000R Unit
CVBS 1 1 1
S-Video 1 1 1
VGA WVGA (800x480) WVGA (800x480) WVGA (800x480)
Touch Panel Type - 5W Resistive 5W Resistive
Touch Screen Interface - USB RS232
PMMA ◎--
Weight (Include Accessory) 2.0 2.1 2.1
Kg
Note: Weight ±10%
5. VGAInput Format
Mode Family Resolution H-Freq. (KHz) V-Freq. (KHz)
1 Mode 1 PC 720x350 31.47 (＋)70.1 (－)
2 Mode 2 PC 720x400 31.47 (－)70.1 (＋)
3 Mode 3 PC 640x480 31.47 (－)59.9 (－)
4 Mode 4 VESA 640x480 37.86 (－)72.8 (－)
5 Mode 5 VESA 640x480 37.50 (－)75.0 (－)
6 Mode 6 VESA 800x600 37.88 (＋)60.3 (＋)
7 Mode 7 VESA 800x600 48.08 (＋)72.2 (＋)
8 Mode 8 VESA 800x600 46.88 (＋)75.0 (＋)
9 Mode 9 VESA 1024x768 48.36 (－)60.0 (－)
10 Mode 10 VESA 1024x768 56.48 (－)70.1 (－)
11 Mode 11 VESA 1024x768 60.02 (＋)75.0 (＋)
12 Mode 12 VESA 1280x1024 63.98 (＋)60.0 (＋)

FLAT DISPLAY TECHNOLOGY
■LCM070Wxx-000R V0.0
Copyright 2008 FDT E-mail- [email protected]
add: NO.85, FuHsing Road, Sec.1,South Dist., TaiChung City 402 TAIWAN R.O.C Tel: [phone] Fax: [phone]
This technical specification is subject to change without notice
5
6. Mechanical Drawing
6.1 LCM070W03- 000R

FLAT DISPLAY TECHNOLOGY
■LCM070Wxx-000R V0.0
Copyright 2008 FDT E-mail- [email protected]
add: NO.85, FuHsing Road, Sec.1,South Dist., TaiChung City 402 TAIWAN R.O.C Tel: [phone] Fax: [phone]
This technical specification is subject to change without notice
6
6.2 LCM070W5U- 000R

FLAT DISPLAY TECHNOLOGY
■LCM070Wxx-000R V0.0
Copyright 2008 FDT E-mail- [email protected]
add: NO.85, FuHsing Road, Sec.1,South Dist., TaiChung City 402 TAIWAN R.O.C Tel: [phone] Fax: [phone]
This technical specification is subject to change without notice
7
6.3 LCM070W5R- 000R

FLAT DISPLAY TECHNOLOGY
■LCM070Wxx-000R V0.0
Copyright 2008 FDT E-mail- [email protected]
add: NO.85, FuHsing Road, Sec.1,South Dist., TaiChung City 402 TAIWAN R.O.C Tel: [phone] Fax: [phone]
This technical specification is subject to change without notice
8
7. Packing List
Before you begin installing the Chassis Monitor, please make sure that the following materials have been
shipped:
A. AC to DC Adapter (100-240VAC 50-60Hz to +12VDC @ 3A)
B. Power Cord
C. Video Cable
D. S-Video Cable
E. VGA Cable
F. USB Cable (LCM070W5U Only)
G. RS-232 Cable (LCM070W 5R Only)
H. Touch Screen Driver CD Disk (LCM070W5U & LCM070W5R Only) / User Manual
If any of these items are missing or damaged, contact your distributor or sales representative
immediately.

FLAT DISPLAY TECHNOLOGY
■LCM070Wxx-000R V0.0
Copyright 2008 FDT E-mail- [email protected]
add: NO.85, FuHsing Road, Sec.1,South Dist., TaiChung City 402 TAIWAN R.O.C Tel: [phone] Fax: [phone]
This technical specification is subject to change without notice
9
8. Installing the Monitor
8.1 Power cable connection:
Connect the power cord to the AC outlet, and connect the power to the monitor through theAC/DC
adapter.
8.2 VGA signal cable connection:
Plug one end of the 15-pin signal cable to the VGA connector at the rear of the PC system and the other
end to the Chassis monitor.
Secure the connectors with the screws on the cable connector at both ends.
8.3 Video / S-Video Cable connection:
If required, connect Video / S-Video Cable from the Open Frame Monitor to the DVD or CCD Camera.
8.4 Switch on the power:
Switch on the power switch on the rear cover of the Chassis Monitor.
A. VGA D-sub 15 (Female)
B. Touch USB or RS232 Interface
C. S-Video (Y/C Video) In
D. Video (CVBS) In
E. DC-In (+12VDC The DC jack core is positive)
E
D
C
B
A

FLAT DISPLAY TECHNOLOGY
■LCM070Wxx-000R V0.0
Copyright 2008 FDT E-mail- [email protected]
add: NO.85, FuHsing Road, Sec.1,South Dist., TaiChung City 402 TAIWAN R.O.C Tel: [phone] Fax: [phone]
This technical specification is subject to change without notice
10
9. Key Function by OSD
9.1 Menu Operation
Operations of key board：
1. To navigate the menu, press [MENU]. (Fig.9-1)
2. The indicator lighting up in white color is the selected adjustment item.
3. To Next Item of the menu, press [MENU] again.
4. The operations below are only available when “Menu” is started.
5. Press [UP] / [DOWN] to adjust the value of the selected item.
Other indicators
Current selected indicator
Expand current selected indicator Adjustable range
Current value
Fig.9-1
Meaning of the selected indicato
r
LED Power Ligh
t
POWER
SOURCE
MENU
UP DOWN

FLAT DISPLAY TECHNOLOGY
■LCM070Wxx-000R V0.0
Copyright 2008 FDT E-mail- [email protected]
add: NO.85, FuHsing Road, Sec.1,South Dist., TaiChung City 402 TAIWAN R.O.C Tel: [phone] Fax: [phone]
This technical specification is subject to change without notice
11
Overview of the menu：
Indicator Meaning Adjustable range For Remark
Brightness 0 ～64 AV / S-Video / VGA Adjust-Bar
Contrast 0 ～64 AV / S-Video / VGA Adjust-Bar
Color 0 ～64 AV / S-Video Adjust-Bar
Tint 0 ～32 AV / S-Video Adjust-Bar
Sharpness 0 ～16 AV / S-Video Adjust-Bar
Color Tone Normal / Warm / Cool AV / S-Video / VGA
Mirror OFF / ON AV / S-Video / VGA
Flip OFF / ON AV / S-Video / VGA
H-Position -10 ～+10 VGA Balance-Bar
V-Position -10 ～+10 VGA Balance-Bar
Auto VGA
Scale Full / 4:3 AV / S-Video / VGA
Scan Over Scan / Under Scan AV / S-Video
Display
Mode 800×480 / 800×600 VGA Only for
SVGA/WVGA
mode
Information AV / S-Video / VGA Fig.9-2
Factory Set AV / S-Video / VGA
Exit AV / S-Video / VGA
Fig.9-2

FLAT DISPLAY TECHNOLOGY
■LCM070Wxx-000R V0.0
Copyright 2008 FDT E-mail- [email protected]
add: NO.85, FuHsing Road, Sec.1,South Dist., TaiChung City 402 TAIWAN R.O.C Tel: [phone] Fax: [phone]
This technical specification is subject to change without notice
12
9.2 Operations
[Power] ：Monitor power on / off
[Source] ：Input signal switch
Overview of input signals：
Indicator Input signal Interface Video system
VGA Analog RGB 800x480_60 / 800x600_60 / 1024x768_60 /
1280x1024_60
Fig.9-3
Indicator of input signal
Video system

FLAT DISPLAY TECHNOLOGY
■LCM070Wxx-000R V0.0
Copyright 2008 FDT E-mail- [email protected]
add: NO.85, FuHsing Road, Sec.1,South Dist., TaiChung City 402 TAIWAN R.O.C Tel: [phone] Fax: [phone]
This technical specification is subject to change without notice
13
10. Trouble Shooting
If experiencing trouble with the monitor, or it fails to operate correctly, please refer to the following
instructions before calling for repairs.
Condition Check Point
1. The picture does not appear ● Check to see that all the I/O and power cables is firmly seated in the
socket.
● Check the Power LED is Lighting When the monitor was turned ON.
● Check if the brightness control is at the appropriate position, not at the
minimum.
2. The screen is not
synchronized
● Check if the I/O signal cable is firmly seated in the socket.
● Check if the output level matches the input level.
● Make sure the signal timings of the computer system are within the
specification of the monitor.
3. The position of the screen is
not in the center
● Adjust the H-position, and V-position, or perform the auto adjustment
Or Factory Set.
4. The screen is too bright (too
dark).
● Check if the brightness or contrast control is at the appropriate
position, not at the Maximum (Minimum).
5. The Screen is shaking or
waving
● Press the Auto adjustment control to adjust. Moving all objects which
emit a magnetic field such as motor or transformer, away from the
monitor. Check if the specific voltage is applied.
● Check if the signal timing of the computer system is within the
specification of monitor.
If you are unable to correct the fault by using this chart, stop using your monitor and contact us.