feather&black Oliver User manual

Oliver bunk bed assembly instructions
IMPORTANT READ CAREFULLY RETAIN FOR FUTURE REFERENCE
Thank you for buying the Oliver Bunk Bed
Please take a few quiet minutes to read these instructions
It is recommended that this product is assembled by two adults.
This product contains small parts, keep small children clear of the assembly area
Lay out the parts on a clean, flat surface and compare with the parts checklist. Save all packaging until
assembly is complete to avoid accidentally discarding fittings
PRODUCT SAFETY
Recommended Mattress Size: 190cm x 90cm. The thickness should not exceed the line marked on the
upper end when assembled as a bunk
Do not allow children to jump on the bunks.Using this furniture other than for its intended purpose
could cause damage to the structure or serious injury to your child
Be aware of the danger of young children (under 6) falling from the upper bunk
All assembly fastenings should always be tightened properly and care should be taken
that no fittings are loose
Before each usage or assembly, inspect bunk bed for damaged hardware,loose joints, missing parts or
sharp edges. Do not use bunk bed if any parts are missing or broken
Always use the ladder for entering and leaving the upper bunk
Never attach or hang items to any part of the bunk bed that are not designed for use with the bed
This product has passed BS EN 747- 1:2012+ A1:2015 &BS EN 747-2:2012+ A1:2015
a) WARNING “High beds and the upper bed of bunk beds are not suitable for children under six years due to the
risk of injury from falls”;
b) WARNING “ Bunk beds and high beds can present a serious risk of injury from strangulation if not used
correctly . Never attach or hang items to any part of the bunk bed that are not designed to be used with the
bed, for example, but not limited to ropes, strings, cords, hooks, belts and bags”;
c) WARNING “Ventilation of the room is necessary in order to keep humidity low and to prevent mould in and
around the bed.”;
d) WARNING “Children can become trapped between the bed and the wall, a roof pitch, the ceiling, adjoining
pieces of furniture (e.g.cupboards) and the like .To avoid risk of serious injury the distance between the top
safety barrier and the adjoining structure shall not exceed 75 mm or shall be more than 230 mm”;
e) WARNING Do not use the bunk bed /high bed if any structural part is broken or missing;
Always follow the manufacturer’s instructions;f)

PRODUCT CARE
Wipe clean using a soft damp cloth followed by dry cloth
Do not use abrasives or cleaning products which may contain ammonia or solvents
Take Care when handling or moving the furniture. Careless handling can damage furniture, try to lift
rather than drag
TWO options of the Oliver BUNK BED can be assembled (as below drawings)
TOOLS REQUIRED
 Allen key (included) and Spanner (included) to assemble the bed stated
option 1 option 2

w

E
I

H

K
K
J
J
L
L

Supplied By: Feather & Black
+A1 2015