feather&black Bethany Bed User manual

Bethany Bed
Double
King
SuperKing

Thank you
Hello, thanks for choosing to purchase your bed from us. - you're now on your way to your best
ever night's sleep. Before you begin building your bed, please take a moment to read through the
instructions and make sure that you've got all the relevant parts listed on the following pages.
Help and support
At Feather& Black，it's our mission to give the whole nation a great night's sleep
this means that the quality of products is of utmost importance to us. If there any
issues with your products or any missing parts, please contact our HELP CENTRE
on 01243 380 600 where a member of our team will be happy to help.
Assembly tips
Before you begin, it's best to identify all parts and fittings to build your bed.
We advise laying these out on the floor to check you have everything, and
familiarising yourself before building.
Safety and care
It s really important to ensure children and animals are kept away from the
assembly area, as there are small components used in this bed which could
present a choking hazard. All plastic and wrapping materials should also be
kept away from children and animals to prevent any risk of suffocation.
To keep your little ones busy, there is a colouring page inside the back cover.
Recycling
Please ensure that packaging is disposed of in a safe and environmentally
friendly way, and recycle where possible. Our assembly instructions are
printed on recycled paper. Please keep your assembly instructions safe
to refer back to in the future.
Bethany Bed - Assembly Guide
Top tip
We recommend that you build your new bed in the room you'd like it to be
located - this will help prevent any risk of damage to your newly built bed
whilst moving it.

Bethany Bed - Assembly Guide
2
Parts
Parts List
A. Headboard 1
B. Footboard 1
C. Wooden Feet 4
D. Side Rails 4
E. Support Leg 4
Fittings
Please check have all the parts listed belew with your product:
a x6
Bolts(M6 35mm)for
Wood Slats to Side Rails
b x1
Screw(M3 35mm)for
Support Leg to Wood Slats
c x6
Nuts(M6 15mm)for
M6 Bolts
d x6
Fat Washers for
M6 Bolts
e x2
Allen Key for M6 Bolts
f x1
Allen Key for M8 Bolts
g x4
Plastic Washer for
Wooden Feet
1 0cm 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
18

Bethany Bed - Assembly Guide
2
Bed assembly - use pack 'B'
g x4
f x1 10mm Note: Leave 10 mm
protruding as in the
diagram
Attach the Wooden Feet to the headboard
and footboard by using Plastic Washer (g) .
Loosen the pre-assembled bolts on the
headboard and footboard with the Allen Key(f)
f x1
MAKE CERTAIN THE BED IS SQUARED UP .AS SHOWN ON THE RIGHT.
Once all four comers are located. make sure the bed is still square as in the
sketch.then tighten all the bolts 100% using Allen key (f).
Attach the side rails to the headboard and
footboard using Allen key (f)

Bethany Bed - Assembly Guide
3
Fitting slat frame - use pack 'E'
b x1
a x6 c x6 d x6 e x6
OPTION"A":
FIXED WOOD SLATS
Carefully locate the slats
onto the unit. Fix one
end of slats.
Use bolt (a) ,Washer
(d)and JCN nut (c) to fix
the unit using Allen Key
(e) .
By hand insert
adjustable feet into
each support leg
by turning clockwise.

Bethany Bed - Assembly Guide
4
Fitting slat frame
a x6 c x6 d x6 e x6

Bethany Bed - Assembly Guide
5