BDI VALENCIA 1856 User manual

bdiusa.com
customerservic[email protected]om
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today and you will be entered to win free a BINK
table from BDI. www.bdiusa.com/product-registration/
Placement and Maintenance
Valencia™is designed for indoor use on level floors. Clean glass with
glass cleaner and metal surfaces with a moist cloth.
Your Valencia™End Table is engineered for easy assembly. Carefully
follow this procedure to prevent any damage. Do not use power tools for
assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at:
[email protected].
For all other concerns, please contact your BDI retailer.
H1 12mm Flat head
Screw x 6
H2 Threaded steel
spacer x 3
H3 Light gray bumper x 4
C1 Large Frame x 1
C3 Glass Top x 1
C2 Small Frame x 1
Designed by Louis A. Lara.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Valencia & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2017, BDI
Made in China. 07.07.2017 v2
VALENCIATM 1856
End Table
T1- 4mm Hex
Wrench x 2

bdiusa.com
[e-mail]
VALENCIA 1856
END TABLE
2
Step 3 - Install bumpers
Install the light gray bumpers in the upper holes of the table frame as shown.
Step 2 - Attach the 2 frames
Orient the large and small frames as shown with the curved edges facing down (on a carpet or padded
surface). With 1 hand, position a threaded steel spacer in the inside counterbore hole and with the other
hand thread a flat head screw through the outside and into the spacer. Repeat for all 3 spacers. Attach
remaining 3 screws through the other frame and into the other end of the spacers. Tighten all 6 screws using
both hex wrenchs.
H2 x 3
H2
H1 x 6
H3 Light Gray
bumper x 4
C1
C2
T1
H1
H1

bdiusa.com
[e-mail]
VALENCIA 1856
END TABLE
3
Step 4 - Install glass top
With help from another person, position your Valencia end table frame where you want it. Position the glass top
on top of the frame and center so that it overhanges equally on all sides.
2 Person Ta sk
Top View
C3 Glass Top x 1
Correct