Fein MOL 1200E Quick start guide

SERVICE
Tool service and maintenance must be performed only by qualified
repair personnel.
When servicing a tool, only use identical replacement parts available
from FEIN.
Repairs on FEIN Power Tools required the use of special tools (pulling devices
and bearing press). Authorized repair centers have trained repair technicians
andequipmentnecessarytoper-formtheserepairs.Serviceorrepairsperformed
by unqualified persons could result in operator injury.
For the location of the repair center near you, please call 1-800-441-9878.
Monday thru Friday, 9AM to 5PM EST. Or, look on our web site at
www.feinus.com and follow the link to “AuthorizedWarranty Repair Centers”
Phone: [phone] Fax: [phone] Toll Free: 1-800-441-9878
FEIN Power Tools
1030 Alcon Street
Pittsburgh, PA 15220
November 24, 2003
MOl 1200E
8”Random Orbit Sander

Fein Power Tools
MOL 1200E Parts List
Item Item Number Description Reqd
10 3-24-31-021-00-7 Cable Clamping Piece 1
20 4-30-70-001-00-6 Screw 2
30 3-24-31-040-00-6 Strain Relief 1
40 3-07-62-233-99-9 Speed Control (120V) 1
50 4-17-01-001-17-2 Ball Bearing 1
60 3-07-12-088-01-3 Brush Holder 2
70 3-07-11-132-00-3 Carbon Brush 2
80 4-30-70-018-00-9 Screw 2
90 3-19-01-114-01-4 Motor Housing 1
100 5-3-273-001-11-7 Armature (110V) 1
110 3-14-28-118-00-7 Air Conducting Ring 1
120 3-24-16-098-00-5 Cover Plate 1
140 4-30-70-007-00-2 Screw 4
200,210 3-12-06-110-01-5 Gear Housing 1
210 4-17-05-019-00-1 Needle Bearing 1
220 3-09-01-032-00-3 Pressure Ring 1
230 3-02-17-327-00-3 Retention Pin 1
240 4-06-12-137-00-8 Sealing Ring 1
250 3-28-05-164-00-0 Retention Button 1
260 3-24-19-115-00-6 Bearing Plate 1
270 3-34-06-284-00-9 Drive Shaft 1
280 4-17-01-010-05-4 Ball Bearing 1
290 3-24-16-101-00-9 Cover Plate 1
305 3-38-09-229-01-2 Bevel Gear (11/44T) 1
320 3-26-24-117-00-9 Washer
330 4-24-43-003-04-3 Securing Ring 4
340 4-30-41-023-04-6 Screw 4
350 3-18-10-202-99-9 Rubber Suction Hood & Band 1
355 3-18-10-205-77-7 Hose Clamp 1
360 3-18-10-205-99-9 Suction Housing 1
370 3-12-07-105-99-9 Eccentric Shaft 1
370a 4-17-01-218-88-8 Bearing 1
370b 4-17-01-218-99-9 Bearing 1
380 4-30-02-030-99-9 Screw 4
390 4-24-01-012-04-9 Disc 1
400 6-38-06-092-99-9 Sanding Pad (8in) 1
450 4-17-01-007-03-8 Ball Bearing 1
480 3-28-05-156-00-8 Sliding Switch 1
490 5-1-273-001-11-5 Field (110V) 1
500 4-30-70-017-00-1 Screw 2
510 3-28-16-055-00-0 Switch Bar 1
520 3-28-16-052-00-4 Switch Rod 1
530 4-30-03-013-99-1 Screw 2
540 3-07-01-218-00-3 ON/OFF Switch 1
550 3-12-01-101-00-8 Cover 1
560 3-14-15-082-00-4 Bolster 1
570 3-14-13-007-00-7 Protective Sleeve 1
580 3-07-05-051-99-9 Cable 1
600 3-14-28-125-00-1 Hood 1
610 4-30-64-020-04-9 Screw 2
590 3-21-19-107-01-6 Side Handle
6-29-13-005-00-4 Pin for Removing Pad
6-29-10-022-00-2 Two Slot Nut Driver