Fenix SD20 User manual

Fenix SD20 Flashlight
Fenix SD20 can be rated as the special design for diving activities. The rotating magnetic
ring is easy and convenient for one-hand operation. Maximum 00-meter waterproof
ability free you like a fish in underwater exploration and greatly guarantee safety. This
diving flashlight also delivers integrated 000-lumen white light and 05-lumen red light.
Bigger button hook and premium lanyard maintain SD20 not just outstanding in
underwater hunting, but also excellent in lighting and other underwater activities.
Technical Parameters
ANSI/PLATO FL1 White Red
High Low
O tp t
000 Lumens 400 Lumens 05 Lumens
R ntime
3h 7h 30min 8h
Distance
72m 08m 73m
Intensity
7400cd 2900cd 300cd
Impact Resistance
m
Waterproof
IPX-8, underwater 00 meters
Accessories Lanyard, spare O-ring, conducting plate*
Notice: The above-mentioned parameters (lab-tested by using two Fenix 8650
rechargeable Li-ion batteries 3.6V/3400mAh) are approximate and may vary between
flashlights, batteries and environments.
*Taken between the batteries with flat top.
◎Uses Cree XM-L2 U2 and Cree XQE Red LED with a lifespan of 50,000 hours
◎Powered by two 8650 rechargeable Li-ion batteries or four CR 23A Lithium
batteries
◎208mm Length x 26mm Diameter x 40mm Head
◎245 grams (excluding batteries)
◎Rotating magnetic ring for one-hand control

◎Double-layer body tube guards against corrosion
◎Integrated white and red light illumination
◎Digitally regulated output maintains constant output
◎Intelligent over-heat protection to avoid high temperature of the surface
◎Low-voltage warning reminds when battery replacement is needed
◎Reverse polarity protection, to protect from improper battery installation
◎Tail cap with big buckle for fast and convenient quick draw
◎Made of durable aircraft-grade aluminum
◎Premium type III hard-anodized anti-abrasive finish
◎Toughened ultra-clear glass lens with anti-reflective coating
Operation Instruction
Rotate the magnetic ring to select the wanted output level.
From left to right, there are five output levels: Battery level, Red light, Off, Low and High.
Battery Level Indicator
When rotates the magnetic ring to the battery level output, there are three states: red
light constant-on displays sufficient power level, red light slow flash displays poor battery
level, red light quick flash displays critical battery level.
Low-voltage Protection
. When the light works at High output, if the detected voltage is lower than the preset
voltage of 6.2V, the output will automatically downshift to 400 Lumens.
2. When the light works at High or Low output, if the detected voltage is lower than the
preset voltage of 6.0V, the output will automatically downshift to 00 Lumens.
3. When the light works at the Red light mode, if the detected voltage is lower than the
preset voltage of 6.0V, the output will automatically downshift to 25 Lumens.
Intelligent Over-heat Protection
The light will accumulate a lot of heat when it is working at High output. When the light is
overheated internally up to 65 or above, the flashlight will automatically adjust the℃
output to prevent the light from overheating.
Battery Specifications
Type Dimensions Nominal
Voltage Usability
Fenix ARB-L 8 Series 8650 3.6 V /3.7V Recommended √√
Fenix ARB-L2 Series 8650 3.6 V /3.7V Recommended** √√
Non-rechargeable
Battery
(Lithium)
CR 23A 3V Usable √

Rechargeable Battery
(Li-ion) 8650 3.6 V /3.7V Cautious* ！
Warning: Please do not mix batteries of different brands, sizes, capacities or types. Doing
so may cause damage to the flashlight or the batteries being used.
* 8650 Li-ion batteries are powerful cells designed for commercial applications and must
be treated with caution and handled with care. Quality batteries with circuit protection will
reduce the potential for combustion or explosion but cell damage or short circuiting are
potential risks the user assumes.
**You need to take conducting plate between the used two batteries if uses Fenix ARB-L2
Series or other batteries with flat-top anode. No need for battery with button-top anode.
Battery Replacement
Unscrew the tail cap to insert the battery with the anode side (+) towards the light head,
and then screw the tail cap.
Usage and Maintenance
◎Disassembling the sealed head can cause damage to the light and will void the
warranty.
◎Fenix recommends using excellent quality battery. If the lamp will not be used for an
extended period, remove the battery, or the lamp could be damaged by electrolyte
leakage or battery explosion.
◎Long-term use can result in O-ring wear. To maintain a proper water seal, replace the
ring with an approved spare．
◎Periodic cleaning of the battery contacts improves the lamp's performance as dirty
contacts may cause the lamp to flicker, shine intermittently or even fail to illuminate for
the following reasons:
Reason A: The batteries need replacing.
Solution: Replace batteries (Please confirm the correct installation of anode and
cathode).
Reason B: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
If the above methods don't work, please refer to the warranty policy before contacting
your authorized distributor.
Product Warranty
Fenix will replace products with documented manufacturing defects within 5 days of
purchase and repair a light free of charge within 5 years of purchase if problems
develop with normal use; if repair is required after 5 years from the date of purchase,
Fenix will charge for parts. The total repair fee is dictated by the cost of the replaced
materials.
Product Registration
Fenix suggests you register your product on the official website for Fenixlight Limited
(www.fenixlight.com). You can get an extra six-month warranty period once you have
successfully registered.

Warning
The flashlight is a high-intensity lighting device capable of causing eye damage to the
user or others. Avoid shining the flashlight directly into anyone’s eyes.