Fiat mOByDic 3210 Series User manual

USER MANUAL
FOR
FORmiDable
mOByDic 3210 Series

SOFTWARE INSTALLATION
1- Copy on your computer the Software CD provided with device.
2- You should adjust the screen resolution of your computer to 1024 768 or 800 600 pi el to be able to view
the FORmiDable Program on the computer screen perfectly.
3- To build up the connection between your computer and FORmiDable, you need to use RS232 or USB cable
4- The FORmiDable Software is programmed for the “Com 1” Port.
LEGEND OF SENSOR ABBREVIATIONS
RPM Rotation per Minute BAT Battery
FRP Fuel Rail Pressure CPP Clutch Pedal Position
MAP Manifold Air Pressure BPP Brake Pedal Position
EGRp EGR Position A/C Air Condition
EGRd EGR Duty Circle VSS Vehicle Speed Sensor
MFdes Measured Fuel CHT Cylinder Heat emperature
BARO Barometer Sensor FTS Fuel emperature Sensor
APP1 Absolute Pedal Position 1 IAT Intake Air emperature
APP2 Absolute Pedal Position 2 BET Battery Electrod emperature
APP3 Absolute Pedal Position 3 DTC Diagnostic rouble Code

RUNNING OF SOFTWARE PROGRAM
1- Click “OK” in order to by-pass the opening screen and start applications.

2- When first running the program, a screen will appear enabling you to make the necessary settings for
connecting the device to your computer and language selection. Click “OK” after selecting the COM PORT and
the LANGUAGE to be used.

3- Select the model of your vehicle and click “OK” button below. A list of gas driven vehicles are displayed at the
top of the screen and diesel driven below. No need to select the date of production of the vehicle, since
FORmiDable will detect that date automatically according to your selection.

4- Connect t e mOByDic 3210 to your ve icle, switc on t e engine and click “OK” key.
After communicating, FORmiDable will connect to your ve icle.

5 - FORmiDable connects to each control unit on the vehicle one by one. Clicking on PCM button at the left of
the screen will connect the brain center of the engine, this detecting sensor data and recognize errors.
Clicking Live Data button below will display the data given by the sensors.
Keeping the mouse on Live Data button a window will be displayed giving sensors ’ legend'.

6- For reading the error on the vehicle, click READ DTC button. If there is a problem, there will be error codes and
legend displayed on the screen. Click CLEAR DTC button to clear message.
If there is no trouble, NOT FO ND RECORDED ERROR will flash on the routing screen below.

7- For connecting to the ransmission Control Unit, click TCM button on menu at the left. o recognize errors in
transmission control unit, click READ DTC button. If there is a problem, there will be error codes and legend
displayed on the screen. Click CLEAR DTC button to clear Message.

8- For connecting to ABS control unit, click ABS button on menu at the left. Click READ DTC button to detect eventual
errors in ABS control unit. If there is a problem, there will be error codes and legend displayed on the screen.
Click CLEAR DTC button to clear Message..

9- For connecting to AIRBAG control unit click AIRBAG control unit, click READ DTC button.
If there is a problem, there will be error codes and legend displayed on the screen.
Click CLEAR DTC button to clear Message.

10- Click CL STER button in order to connect to the cluster control unit. Click Live Data button in order to read
cluster sensor data. KM indicates the total km reached by that vehicle. FLI indicates the amount of fuel left in the tank.
D C indicates the number of error codes. Click READ DTC button to read error codes and legend .
Click CLEAR DTC button to clear Message.

INJECTOR CODING NIT ( IC )
11-
a-) Entering into Injector Coding nit :
You can enter into Injektor Coding Unit by clicking IC button on main menu.

b-) Reading injector codes recorded in brain center :
o read the injector codes recorded in brain center, click Read Injector button on menu.

c-) Injector Programming (CODING)
For programming injectors, click Prog Injector Button. urn off the ignition on your vehicle. Click OK button and
wait for 30 seconds. hen, urn on the ignition and click OK button again, wait for another 15 seconds.
he time elapsed will be displayed on the screen below.

d-) Enter the new injector codes where appropriate on the diagram by clicking the adjacent OK button after each entry.
Injector codes are 16 digits wide and the space assigned for each entry is designed accordingly. After entering all injector
codes, click OK button at the bottom of the screen. A message will be displayed : “INJECTOR WILL BE
REPROGRAMMED , ARE YO S RE ?” Click OK button again to accept and start the programming.
his process will take one minute. Enter the injector codes according to ignition sequence.

e-) At the end of this One Minute period, turn the engine ignition off and click OK button. hen wait for 15 seconds...
urn on the ignition of your vehicle and click OK button again. Wait for another 15 seconds.
When the “PROGRAMMING FINISHED” message appears, that would mean that the processing ended sucessfully.
Click OK button to go back to main menu.