FiberFlies PixelWhips User manual

FiberFlies PixelWhips
Quick Start Guide
On/O & Color Modes:
PixelWhip uses a single button for all operations! Long-press
for 1 second to turn on (this avoids accidental power-on in
your backpack etc). Short-click to change color modes. Long
press for 2 seconds to power o - PixelWhip remembers the last
color you were on, and resumes the next time you turn on!
Color Modes
1. Blue
2. Red
3. Green
4. RGB (shimmering white)
5. Cyan
6. Magneta
7. Yellow
8. Pastel White
9. Rainbow Strobe
10. Watermelon Wipe
11. White/Blue/ Wipe
12. Green/Blue Wipe
13. Yellow/Green Wipe
14. Red/Yellow Wipe
15. Magneta/Red Wipe
16. Cyan/Magneta Wipe
17. Blue/Magneta Wipe
18. Rainbow Wipe
19 Solid Rainbow

Power
PixelWhip uses a single 18650 protected circuit Li-Ion battery
for power (battery & charger included).
CAUTION: non protected 18650 could damage your Pix-
elWhip. If you buy extra batteries from another source, make
sure they have a protected-circuit.
To power PixelWhip, insert battery with positive (+) end to-
wards berhead and screw cap/handle together. When battery
run out, PixelWhip will blink red 3 times to indicate low power,
then power o.
NOTE:When you 1st recieve your PixelWhip, battery may
not be fully charged. To change battery, plug charger into
power source and insert battery. Charger light will glow green
once fully charged. To reach max capacity, battery may need to
charge for 8hrs or more. Battery can continue to trickle charge
even aer green light.
Optical ber care:
Store and transport PixelWhip’s berhead in bag (included) to
protect from unintentional tangling and damage.
To clean and keep the bers untangled and smoothly owing,
use small amount of silicone lubricant on a cloth; starting at
the berhead, gently wiping down the length of bers.
If radial bearing stops turning smoothly, apply a tiny amount
of WD40 directly into the bearing’s inner race.
IMPORTANT: Taking care not to get WD40 on bers, Unscrew the ber
head, so you can apply WD40 from the back side. Turn the bers in the
bearing to work the WD40 in.

WARNING
USE AT YOUR OWN RISK
Intended for ages 14 and up.
PixelWhip is not a children’s
product.
Do not modify this product.
Do not use this product for purposes
for which it is not intended.
TAKE PRECAUTIONS:
! Fibers can hurt when whipped around at high speed !
Maintain a safe distance around you
when using in the presence of others.
Risk of eye injury
Wear proper eye protection
Always repair or replace damaged or worn parts before further use.
To prevent voiding the warranty and/or compromising safety, per-
formance, durability and function, we recommend you ONLY use
PixelWhip as is. Modify at your own risk; it will void the warranty.
Stay alert and use common sense. Do not use PixelWhip when
tired, distracted, or in the presence of fragile or breakable objects.
Do not use PixelWhip while impaired. Consult prescription labels
to determine if your judgement or reexes may be impaired by tak-
ing a particular drug; if so do not use PixelWhip.

FiberFlies can hurt others if misused. Please always maintain control
over your PixelWhip: is includes educating your friends on how to
use them safely; especially in crowds and when the energy is high.