Fisher-Price OCEAN WONDERS L6925 User manual

Please keep this instruction sheet for future reference,
as it contains important information.
Requires four “C” batteries for
aquarium (included) and two "AAA" (LR03)
alkaline batteries for remote (not included) operation.
Adult assembly is required.
Tool required for battery installation:
Phillips screwdriver (not included).
www.fisher-price.com
L6925

2
CAUTION
Please keep small parts such as the plastic tab out of
children’s reach. Throw the plastic tab away.
Note: A plastic tab was attached to the toy for in-store demonstration purposes.
While the tab may have already been removed, check the back of the toy to be sure.
If the plastic tab is still attached, pull and remove the tab. Throw the plastic tab away.
Before Use
For best performance, we recommend that you replace the batteries that came with
the aquarium with four, new “C” (LR14) alkaline batteries.
• Locate the battery compartment on the back of the aquarium.
• Loosen the screws in the battery compartment door with a Phillips screwdriver.
Remove the battery compartment door. Remove and throw away the batteries.
• Insert four “C” (LR14) alkaline batteries.
Hint: We recommend using alkaline batteries for longer battery life.
• Replace the battery compartment door and tighten the screws.
IMPORTANT! Under normal use conditions, the batteries in the aquarium will require
replacement more often than the batteries in the remote. When sounds, lights or
motions from the aquarium become faint or stop, it’s time for an adult to replace the
batteries in the aquarium.
Aquarium Battery Replacement
1.5V x 4
"C" (LR14)

3
• Locate the battery compartment on the back of the remote.
• Loosen the screw in the battery compartment door with a Phillips screwdriver.
Remove the battery compartment door.
• Insert two "AAA" (LR03) alkaline batteries.
Hint: We recommend using alkaline batteries for longer battery life.
• Replace the battery compartment door and tighten the screw.
• Protect the environment by not disposing of this product with household waste
(2002/96/EC). Check your local authority for recycling advice and facilities
(Europe only).
Remote Battery Installation
In exceptional circumstances, batteries may leak fluids that can cause a chemical burn
injury or ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types: alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove exhausted batteries
from the product. Dispose of batteries safely. Do not dispose of product in a fire.
The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be charged under
adult supervision.
Battery Safety Information
1.5V x 2
"AAA" (LR03)

4
Attach
1
IMPORTANT! Always attach all provided fasteners (strings, straps, clamps, etc.)
tightly to a crib or playpen according to the instructions. Do not add additional
strings or straps to attach to crib. Check frequently.
Note: If you are attaching this toy to a crib side rail that can be lowered and raised, make
sure the crib side rail is in the raised (locked) position whenever a child is in the crib.
• Position the toy inside the crib.
• Wrap one of the toy’s attachment straps around the crib rail.
• Slide the strap through the groove on the back of the toy. Pull the attachment strap up
slightly to fasten it to the button on the back of the toy.
• Repeat this procedure to secure the other attachment strap.
Note: This toy should be snug against the crib rail and spindles. Use the strap slot that
provides the tightest fit.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. L6925b-0920
©2007 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA
WARNING
Prevent falls and entanglement:
This product will not attach to all crib designs. Do not add
additional strings or straps to attach to a crib or playpen.
Attachment
Strap
Crib Rail
Groove
Button

5
Attach
2
• Tie the toy’s strings to the crib spindles.
Note: It is better to tie the strings in a knot than a bow, since a bow may be easily untied.
Remove
A
B
• Untie the aquarium strings.
• Pull the attachment strap out and down to remove it from the button A.
• Then, push the strap up and pull from the groove B.

6
Use
IMPORTANT!
• In the unlikely event that use of the remote interferes with normal use of other remote
controlled equipment, such as televisions and stereos, or use of other electric or
battery powered appliances interfere with operation of the aquarium, do not use both
appliances at the same time.
• For best performance avoid using the remote in areas of bright light. In bright natural
or artificial light, you may notice a loss of range. Move the aquarium or reduce the
amount of light to improve performance.
• When using the remote, make sure that the arrow on the aquarium dome is pointing
towards the transmitter window on the remote. For best results, make sure the path
between the transmitter window on the remote and the dome on the aquarium are
in a direct line and free of obstacles. Rotate the aquarium dome so that the arrow
points to the area from which you’re most likely to use the remote. For example,
if you’ll most often be using the remote from the doorway of the nursery, make sure
the arrow on the aquarium dome is pointing towards the doorway and that the path
between the aquarium dome and the doorway is free from obstructions.

7
Soothing Music and Soft Lights
• Press the button on the remote to activate
the aquarium. Press again to stop.
Note: The remote will remain active for
about one hour. After an hour, you will
need to slide the power/volume switch
on the aquarium off, then on again
to reactivate.
Power/Volume Switch
Choose from four settings: off ; on with low volume , on with medium volume or
on with high volume .
Song Select Button
Press the button to change song selections.
Mode Select Switch
Slide the switch to select one of three modes:
Music, sounds, lights and swimming motion
Music, sounds and lights
Music and sounds only
Power/
Volume
Song
Select
Mode
Select
Top View
Press

8
United States Only
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful inter-ference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer responsible
for compliance could void the user's authority to operate the equipment.
FCC Statement
• Wipe with a clean cloth dampened with a mild soap and water solution. Do not immerse.
• This toy has no consumer serviceable parts. Do not take this toy apart.
Care
Consumer Information