FiberX FX-P120 User manual

© PureLink GmbH
Innovation German Enterprises.Know-How. Quality. Design.
PureLink GmbH | Von-Liebig-Straße 10 | 48432 Rheine | Germany | Tel.: [phone]-0 | E-mail: [e-mail] | Internet: www.purelink.de
1
1
Thank you for purchasing FX-P120
The optical DVI pigtail extender extends DVI signals up to 300m using
single strand multi-mode optic ber transmission. It transmits the EDID
information and HDCP over ber in real time, so it can be used with HDMI
standard devices such as BluRay players, PS4, etc.
Package Contents
Please make sure all of the following items are included in the package:
1 FX-P120 Transmitter & Receiver
2+5V DC Power supply x 1pcs
3 User Guide
If any of the above items are missing, please contact your supplier for support.
Note: Package content may dier if you have placed a special order or placed order from anywhere other than
PureLink GmbH. PureLink GmbH reserves the right to make changes without further notice to a product de-
scribed herein to improve reliability, design, packaging or function.
Installation
Installation Steps:
1. Connect the Transmitter module to the DVI source device.
2. Connect the Receiver module to the display.
3. Connect a single strand multi-mode SC terminated optic ber (50/125µm) from the Transmitter to the
Receiver module.
4. Connect the included +5V DC power supply into Receiver module.
5. A blue indicator LED will light up after all connections are completed.
Note: The Transmitter module does not need to be externally powered unless the source device does not
supply enough power through the DVI connector.
LED indicator DC +5V
Power jack
SC type optical port
FiberX DVI Fiber Extender Pigtail User Guide
FX-P120

© PureLink GmbH
Innovation German Enterprises.Know-How. Quality. Design.
PureLink GmbH | Von-Liebig-Straße 10 | 48432 Rheine | Germany | Tel.: [phone]-0 | E-mail: [e-mail] | Internet: www.purelink.de
2
2
We, PureLink GmbH hereby warrant the nal purchase of our product as follows. In case of defect, please contact
the reseller from which you purchased this item.
One year limited warranty
Customers are liable to a free of charge repair or replacemenent, if goods are found to be defective with in
1(one) year of the purchase date, providing the unit has not been mistreated.
Out of warranty services
A product is deemed to be out of warranty and may be liable to customer charges when it is past a year in age or
if the defect is not related to manufacturing, as in the following cases:
-Product defects caused by accident, disaster.
-Damage to product caused by the customer’s carelessness or mistaken application.
-Damage to product caused by the application of parts or products not supplied or sold by our company.
-Damage to product and any related defect caused by unwarranted service personnel or any indication that
chassis covers have been removed or tampered with.
Warranty
Application
Trouble shooting
depending on LED indicator status
No display TX Solid/RX Solid
-Connect power supply into TX
No display TX Solid/RX Blink
-Please make sure that optical ber is well con-
nected between TX and RX
-Connect power supply into TX
No display TX Blink/RX Solid
-Please make sure that power supply is connect-
ed into RX
-Connect power supply into TX
1 ch Multi-mode optic ber
w/SC connecter
Up to 300m
PC
Display
NOTE: If you are still experiencing problems, It may
be neccessary to clean the module connector or SC
ber cable. Around 80% of connection issues with
Fiber optic systems are due to dirty connectors - for
more information see the Purelink ber cleaning
guide on our website: http://www.purelink.de/lead-
min/purelink/media/sonstige/PureLink_Fiber_Clean-
ingInstructions.pdf
FiberX DVI Fiber Extender Pigtail User Guide
FX-P120