Field & Stream HEH00624 Instruction Manual

Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
SAFETY MUST BE YOUR FIRST PRIORITY WITH THIS PRODUCT
Instruction and Safety Manual
•Always Wear a Safety Harness with this Product
•Practice Using at Ground Level
•Weight Limit: 300 lbs.
•Tree Size: 9”-18” diameter
MODEL: HEH00624
THE VORTEX ALUMINUM CLIMBER
©2013 (rev. 02/13)
Every year serious injury and even death occurs from hunting related falls. To ensure your safety, please COMPLETELY
read and follow this safety manual and ALL warning labels BEFORE assembling, installing or utilizing this product.
DO NOT USE THIS PRODUCT BEFORE FULLY UNDERSTANDING ALL SAFETY WARNINGS AND INSTRUCTIONS. IF YOU
HAVE QUESTIONS, ARE UNSURE ABOUTANY INFORMATION OR NEED ADDITIONAL INFORMATION CONCERNING
YOUR PRODUCT, CONTACT OUR CUSTOMER SERVICE DEPARTMENTAT 1-866-972-6168 OR VISIT
WWW.PRIMALVANTAGE.COM. KEEPAND MAINTAIN THIS SAFETYAND INSTRUCTION MANUAL IN ASAFE LOCATION
FOR FUTURE REFERENCE.
The Field & Stream trademark is owned by American Sports Licensing Inc., and is not associated with Field & Stream Licenses
Company, LLC or Field & Stream Magazine.
Warning

CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
TREESTAND SAFETY WARNINGS
Please read the following instruction manual and warnings labels completely before utilizing this product. Failure to understand and execute the instructions
and warnings may result in serious injury or death. In the event of an accident, have a plan for rescue, including the use of devices that may be easily reached
while suspended. NEVER hunt without a rescue plan.
ALWAYS read and understand all warnings and instructions. Watch the enclosed DVD in it’s entirety before doing anything with this product including
assembly, installation etc. before each use of this product. Failure to read and understand all warnings and instructions and DVD material may result in
serious injury or death. Contact a Customer Service Representative with any questions you may have.
NEVER exceed weight limit of 300 lbs. DO NOT use if your combined weight with all of your hunting gear and any accessories exceeds 300 lbs. Use of tree
stand over the weight limit may result in serious injury or death.
DO NOT use this tree stand while under the influence of alcohol, medication or any illegal substances. Use of tree stand while under the influence of any of
these substances may result in serious injury or death.
NEVER use this treestand during inclement weather. DO NOT use tree stand during thunderstorms, snowstorms, hurricanes, tornadoes or any other weather
conditions that include (but not limited to) lightning, icy conditions, or high winds that could create slippery or dangerous situations.
NEVER use treestand If you are feeling ill, nauseous, or dizzy. Physical ailments can reduce your ability to safely install, utilize, and remove your treestand.
Please consult a physician prior to use.
NEVER use this tree stand if you have a history of health problems such as (but not limited to) heart problems, back problems, high blood pressure, impaired
vision, equilibrium impairments, are afraid of heights, have been advised by a doctor or physician not to climb. If you are not physically fit, well rested, and
alert, or if you have any other physical or mental condition that would impair your ability to properly use this treestand.
NEVER use this tree stand on a tree that is dead, leaning, diseased, loose barked or on a utility pole as the tree may fall, break, or uproot and may result in
serious injury or death. NEVER rely on a tree branch for support. NEVER jump or bounce on a treestand to seat it to the tree.
NEVER transport any of your equipment with yourself while ascending or descending the tree. You will need to have two hands free during ascending and
descending for safety. Use a haul line to pull up your firearm (unloaded, chamber opened with safety lock engaged, barrel facing towards the ground), bows,
arrows, knives or any other equipment to your tree stand once you have reached your desired hunting height. ONLY pull up hunting equipment after the tree
stand has been secured to the tree and after you and your harness have been secured to the tree. Prior to descending, lower your equipment on the opposite
side of the tree from which you are climbing. Make sure that the unloaded firearm’s safety lock is engaged and the gun barrel is pointing towards the ground.
ALWAYS inform someone of your hunting location, where the treestand will be located and the expected duration of the hunt. ALWAYS hunt with a plan and a
buddy. Before you leave home, let others know your exact location, when you plan to return and who is with you.
ALWAYS carry emergency signal devices such as a cell phone, walkie-talkie, whistle, signal flare, PLD (personal location device) and flashlight with you at all
times and within reach even while you are suspended in your harness. Watch for changing weather conditions. In the event of an accident, remain calm and
seek help immediately.
ALWAYS inspect the tree stand and the Fall Arrest System (Harness) for signs of wear or damage BEFORE each use. Also inspect to ensure that nuts and
bolts are secure. Pay special attention to the harness and straps, guaranteeing that nothing has been frayed or severed. Destroy all products that cannot be
repaired by the manufacturer. Contact a Customer Service Representative for replacement parts. The FallArrest System MUST be discarded and replaced
after a fall has occurred. DO NOT store treestand or safety harness outdoors when not in use.
DO NOT ATTACH YOUR FULL BODY HARNESS TO YOUR TREESTAND.
DO NOT modify or alter your tree stand. Improper installation or adjustment may cause serious injury or death. Remove all contents from box. Inspect for any
damaged or missing parts. If any parts are missing or damaged, you must only use certified replacement parts. Using any other replacement parts will void
product warranty. THERE ARE NO EXTRA PARTS. All parts MUST be used to ensure the safety of you and your stand. If you think parts are missing or
damaged, STOP IMMEDIATELY and contact our Customer Service Department. Using the tree stand with missing or damaged parts may result in serious
injury or death. DO NOT return this product to the retailer. Contact a Customer Service Representative if you have any missing, damaged or extra parts.
PRACTICE installing, adjusting and using your tree stand at ground level prior to using it at an elevated position. Familiarize yourself with the use of
climbers by practicing at ground level before using in a hunting environment.
ALWAYS keep Instructions (written and video) in a safe place and review before each use. It is the responsibility of the treestand owner to furnish the
complete instructions to anyone who borrows or purchases the treestand from you. A safe treestand hunting video has been included. Please view it in its
entirety prior to using this product.
NEVER use this treestand for any use other than hunting. Our treestands are designed for hunter’s to wear a Full Body Harness. If you are not
completely comfortable and confident with your ability to safely install, ascend, hunt and descend using a Full Body Safety Harness and this
treestand, DO NOT PROCEED.
NEVER use this treestand for trimming trees.
NEVER fall asleep in your stand as you may fall out resulting in serious injury or death.
ALWAYS be sure to retighten all bolts BEFORE each new use of treestand.
ALWAYS have a minimum of three people present when installing or removing this treestand.
WWW.PRIMALVANTAGE.COM
©2013 (rev. 06/12)

CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
TREESTAND SAFETY WARNINGS
Safety must be your first priority
during the use of this product.
NEVER adjust your stand while in use. ALWAYS ensure that you and your treestand are safely secured to a healthy tree. Your tree stand MUST be
attached tightly to the tree and secured in place. If the stand is not secure, it may shift while in use, resulting in serious injury or death.
DO NOT leave your treestand outside since weather and animals may cause damage. Tree growth can also cause stress and damage straps and
buckles. It must be stored inside, free of moisture, when not in use.
NEVER wear jewelry or loose fitting clothing, which can cause hazardous conditions. Clothing may be caught in your equipment and cause you to fall. You must
always wear non-slip or rubber boots. Shoelaces must be tucked into your boots. Rings and necklaces MUST NOT be worn.
NEVER use this treestand with a second person. The treestand is designed for use by ONE person.
NEVER let children use this treestand without adult supervision. This treestand is not a toy. No one under the age of 18 should attempt to use this product
without direct adult supervision.
DO NOT use tree stand if any nuts or bolts or parts are loose, bent, or crooked.
ALWAYS know your physical limitations. Don’t take chances. If you start thinking about how high you are, don’t go any higher. Instead, choose a
minimum height that will allow for safe, effective and comfortable hunting.
ALWAYS wear a Fall Arrest System (FAS) (Harness) consisting of a full body safety harness after leaving the ground. ATMA Certified Full Body Harness MUST
always be connected to yourself and the tree during ascending, hunting and descending. You MUST stay connected at all times after leaving the ground while
using climbing and hang-on treestands. Single safety belts and chest harnesses are no longer allowed and should NEVER be used. If you are not wearing a
Full Body Harness properly attached to the tree, that is protecting you from a fall, DO NOT leave the ground. Failure to wear your Full Body Harness may
result in serious injury or death. Be aware that falls can occur at anytime after leaving the ground.
ALWAYS read and understand the manufacturer’s Warnings, expiration date (if applicable) and instructions on how to use and how to properly adjust the
harness. Practice the use of a full body safety harness at ground level in the presence of a responsible adult to experience the feeling of hanging suspended
before using in a hunting environment. Failure to follow harness instructions may result in not being able to return to the stand and being suspended in a
harness after a fall, or serious injury or possibly death. If the hunting location is unknown by anyone and communication efforts are unsuccessful, you MUST
have a personal plan for rescue/escape because prolonged suspension in a harness may be fatal. It is important to exercise the legs by pushing against the
tree or doing other forms of continuous leg exercises to avoid blood pooling while being suspended. Hunters with varying degrees of physical fitness may
require different plans to recover/escape the effects of prolonged suspension. Have a personal plan and practice it in the presence of a responsible adult before
leaving the ground. No one escape/rescue plan will work for every hunter on every tree in every circumstance. Only you can determine the best
recovery/escape plan for your situation before leaving the ground.
ALWAYS have a suspension relief device on your person and readily accessible while using a harness. These devices allow the user to relieve the load on the
lower extremities if suspended in a harness and help maintain circulation in the legs, mitigate suspension trauma (blood pooling) or allow descent to the ground.
Several optional products/systems are available that offer self-recovery or self-extraction from a fall when suspended in a harness. Some systems automatically
descend the user while others allow user control. One of these products/systems can be considered for use as an additional safety precaution against
prolonged suspension and suspension trauma, Be sure to follow the manufacturers’ instructions on the safe use of these products/systems.
Hunt from the ground when self-recovery escape is absent. There is time to make a correct decision on what action to take if a fall occurs while wearing a full
body harness. It is important to remember “DO NOT PANIC.” Remain calm and implement your practiced rescue, relief and recovery plan.
NEVER allow the tether strap to get under your chin or around our neck. The length of the harness tether MUST be minimized at all times. It should be adjusted
so that it is above the head with no slack (snug) in the sitting position and you should have the minimum amount of slack possible when climbing.
NEVER lean out from the treestand for any reason.
The initial angle of the climber at ground level, MUST allow for the decrease in tree diameter while ascending by tilting slightly upward.
While climbing, adjustments to the harness tether should be frequent and coordinated with tree stand movement to maintain the least amount of slack
in the tether that will allow for climbing.
ALWAYS read and understand all warnings and instructions
before each use of this product. Failure to read and
understand all warnings and instructions may result in
serious injury or death.
NEVER exceed weight limit of 300 lbs. DO NOT use if your
combined weight with all your hunting gear and any
accessories exceeds 300 lbs. Use of tree stand over the
weight limit may result in serious injury or death.
ALWAYS inspect the tree stand for signs of wear or
damage BEFORE each use. Also inspect to ensure that
nuts and bolts are secure and straps are not frayed, worn,
or broken.
ALWAYS wear a FallArrest System (FAS) after leaving the
ground. If you are not wearing an FAS, DO NOT leave the
ground. Failure to wear an FAS may result in serious injury
or death.
DO NOT use this tree stand while under the influence of
alcohol, medication, or illegal substances. Use of tree stand
while under the influence of any of these substances may
result in serious injury or death.
NEVER use this tree stand if you have a history of health problems
such as (but not limited to) heart problems, back problems,
impaired vision, equilibrium impairments are afraid of heights or
have been advised by a doctor not to do any strenuous activity. If
you are feeling ill, nauseous, or dizzy DO NOT use this tree stand
or If you are not physically fit, well rested and alert. Physical
ailments can reduce your ability to safely install, utilize and remove
your tree stand.
NEVER use this tree stand during inclement weather such as (but
not limited to) thunderstorms, snowstorms, hurricanes, icy
conditions, or high winds that could create slippery or dangerous
situations.
NEVER use this tree stand on a dead, leaning, loose barked tree or
on a utility pole as the tree may fall, break, or uproot and may result
in serious injury or death.
DO NOT modify or alter your tree stand.
ALWAYS make sure that the straps connecting the top and
bottom platforms are secured and at the proper length
recommended.
ALWAYS make platform level adjustments at ground level.
NEVER remove or deface warning labels.
Manufactured in the year XXXX
ALWAYS ensure that the platforms are tilted slightly
upward at ground level to allow for the decrease in tree
diameter when ascending.
ALWAYS make frequent adjustments to the harness tether,
coordinated with tree stand movement to maintain the least
amount of slack in the tether that will allow for climbing.
ALWAYS practice at ground level before using in a hunting
environment.
W A R N I N G
SAMPLE
NEVER remove any safety warning
stickers from this product.
WWW.PRIMALVANTAGE.COM
©2013 (rev. 06/12)

CUSTOMER SERVICE DEPARTMENT 1-866-972-6168 WWW.PRIMALVANTAGE.COM
• ALWAYS thoroughly inspect the tree before installing your product. DO NOT install your TREE/LADDER STAND onto any dead or unsafe tree, telephone or utility
pole, structural column, or man-made structure. Doing so may result in serious injury or death.
• ALWAYS select the proper tree for use with your TREE/LADDER STAND. Select a live straight tree that fits within size limits recommended (minimum tree
diameter must be no less than 9 inches and maximum of 18 inches.). DO NOT rely on a branch for support.
• DO NOT select a tree in the dark or choose a tree in close proximity to a fence. You must not have any stumps or rocks beneath your tree.
• NEVER use TREE/LADDER STAND on a tree that is dead, diseased , leaning or on wet and uneven ground as the tree may fall, break or uproot.
• Your tree must not be wet, icy or slippery or on wet, swampy, or loose ground that allows the tree to be unstable. Check the ground under TREE/LADDER STAND
to ensure it is firm and level.
• Be sure you have a level stand platform. Your tree must not lean or have any irregular shape.
• Tree must not have any loose or scaly bark or excessive vines, nails, screws, or any other sharp objects protruding that may sever webbing on product. Any
surrounding trees must not lean or have dead limbs that may fall onto you or your product.
• NEVER HURRY!! HURRYING CAUSES ACCIDENTS!! While climbing a TREE/LADDER STAND, make slow, even movements no more that ten to twelve inches
at a time. Make sure you have proper contact with tree and/or TREE/LADDER STAND every time you move. On ladder tree stand, ALWAYS maintain three points
of contact with each step and ALWAYS lean forward as you climb.
Several treestands are equipped with a footrest, armrests and/or shooting rail. Neither the footrest, armrests nor the shooting rail have been designed to
support a user’s weight. Under NO circumstances should you place more than fifteen (15) pounds of weight on these structures. Doing so will put the user
in serious risk of injury or death.
CHOOSING A SAFE TREE
PROPER CARE AND MAINTENANCE:
• Inspect for defects (damage, rot, corrosion, cracks, freezing, excessive heat, etc.) before every use is required. Do not use if damage is detected or
suspected.
• We recommend replacing all hardware/cables/nuts/bolts/clips on your tree stand every two (2) years or sooner if inspection finds it necessary. Use only
Primal Vantage approved replacement straps and parts. Use of any other straps or parts, will be viewed as a modification to the product. Any modification
will void the warranties and relieve Primal Vantage from all liabilities. Failure to follow these instructions may result in serious injury or death.
• DO NOT overtighten the hardware. DO NOT use a socket wrench. This can lead to structural damage and may negatively affect the performance of your
stand. Failure to follow these instructions may result in serious injury or death.
• All photos are taken from the front view unless otherwise noted.
• By registering your product, you may be enrolled in our discount program.
You may receive a 20% off coupon for our website store, www.primal-store.com to purchase replacement parts in the future.
• In most cases, bolts come with two nylon washers. One washer will be placed against the bolt head the other washer will be placed against the nut.
©2013 (rev. 06/12)

©2013 (rev. 02/13)
A
B
J
E
H
C
D
G
K
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
A
Seat Platform (1)
Cable (2)
C
B
Foot Platform (1)
Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
Seat Cushion (1)
D
Shooting Rail Cover (1)
E
Backpack Strap (2)
G
M10 PE Quickclip (2)
J
H
T-Knob (2)
PARTS LIST
B
A
2 T-Knob..............................Part # DK-500
C
D
E
F
G
H
J
K
1 Seat Platform....................
1 Foot Platform....................
Part # DSP-624
Part # DFP-624
2 Cable................................Part # AC-400
2 M10 PE Quickclip.............Part # DQ-615
1 Skirt...................................Part # DS-624
1 Shooting Rail Cover..........Part # DPSC-830
1 Seat Cushion....................Part # DSC-624
2 Backpack Strap.................Part # DBS-830
75 2 M12x75mm Bolt................Part # 1875
1 Harness............................Part # 2013
2 Stabilizer Strap.................
(Pre-Installed on Foot and Seat Platforms)
Part # SS-100
WWW.PRIMALVANTAGE.COM
•Always Wear a Safety Harness with this Product
•Practice Using at Ground Level
•Weight Limit: 300 lbs.
•Tree Size: 9”-18” diameter
MODEL: HEH00624
THE VORTEX ALUMINUM CLIMBER
Skirt (Rolled up) (1)
F

©2013 (rev. 02/13)
Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168 WWW.PRIMALVANTAGE.COM
ASSEMBLY INSTRUCTIONS PAGE 1 MODEL: HEH00624
THE VORTEX ALUMINUM CLIMBER
5. Repeat above steps to assemble the Seat Platform.
J
3. Thread T-knob H on bolt.
Frame Support
4. Insert 1-M10 Quickclip J through frame support and
welded tab to secure frame in place.
Frame Support
75
6. Attach Backpack Straps G to the
underside of Foot Platform B .
(See Backpack Strap Instructions)
C
7. Insert one end of Cable C into the curved railing
of the Foot Platform. Push Cable through the railing
until the bulbs on the cable are through the notch at
the appropriate length.
The notch in the Railing will hold the cable in place.
1. Insert 1-M12x75mm bolt through the bottom of Foot Platform. 2. Lift railing and insert frame support through attached bolt
H
G

Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
10. Insert one end of Cable C into the curved railing of
Seat Platform A .
Push Cable through the railing until the bulbs on the
cable are through the notch at the appropriate length.
Wrap Cable around the back of the tree and insert the
other end of the cable through the opposite railing of the
Seat Platform . (See Closeup Above)
C
8. Wrap the cable around the back of the tree and insert the
other end of Cable C into the opposite railing of the Foot
Platform The notched end of the Railing will secure the cable.
(See Closeup Above)
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
ASSEMBLY INSTRUCTIONS PAGE 2 MODEL: HEH00624
THE VORTEX ALUMINUM CLIMBER
9. Attach Shooting Rail Cover E to the Shooting Rail.
Attach Skirt F around the sides of Seat Platform B .
Attach Seat Cushion D to Seat Platform B by
following the Seat Cushion Instructions.
C
©2013 (rev. 02/13)
WWW.PRIMALVANTAGE.COM
CLOSEUP
E
D
F

Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
ASSEMBLY INSTRUCTIONS PAGE 3 MODEL: HEH00624
THE VORTEX ALUMINUM CLIMBER
NOTE:
Images used are for demonstration purposes only and may not depict the actual product.
At ground level, apply pressure to both platforms to ensure they
have appropriate angle on tree and T-knobs are properly installed.
©2013 (rev. 02/13)
WWW.PRIMALVANTAGE.COM
11. With Foot Platform 1-2 feet off the ground, STEP CAUTIOUSLY on the
platform.
(Attach your harness to the tree as per manufacturer’s instructions).
Facing the tree, slide feet into the foot straps and tighten securely. Secure
bungee cord around your heels to assist in keeping feet in foot straps.
CAUTIOUSLY put your weight on the foot platform.
The additional weight will create tension on stabilizing straps and cables.
IMPORTANT: Have both seat and foot
platforms angled toward the base of tree to
compensate for a smaller tree diameter at
desired hunting height.
12. Raise Seat Platform to chest height.
Use Stabilizing Straps to join two sections of stand
together, so Foot Platform and Seat Platform will not
separate from each other accidentally.
Thread Stabilizing Straps K on Foot Platform B
through Pre-Installed Buckles on Seat Platform A
and tighten appropriately.

Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
SEAT CUSHION INSTRUCTIONS
Slot A Slot B
1. Place Seat Cushion between the
armrests with the straps facing the ground.
Insert the buckle end of the strap through
the armrests and around the handle rail.
2. Insert the loose end of the strap
through the opposite armrest and
around the handle rail. 3. Pull strap underneath seat cushion
and thread through the buckle.
4. Hold Buckle as shown. You
should be able to see two slots A&B.
5. Insert loose strap through Slot A.
6. Continue pulling strap through
Slot A. Insert strap through Slot B.
7. Continue to pull strap until tight.
Pull to tighten
©2013 (rev. 11/12)
WWW.PRIMALVANTAGE.COM

1. Turn Foot Platform over, insert the looped ends of the backpack
straps up through the rear frame of the platform . (See Fig. 1)
2. Insert the other end of the strap back through the loop and pull
tight. (See Fig. 2)
3. Insert the loose end of the strap through the front of the platform.
(See Fig. 4)
4. Insert the strap end through the slot with the teeth on the clip.
(See Fig. 5)
5. Insert the strap end back through the second slot on the clip.
Pull to tighten. (See Fig. 6)
6. Follow steps 1- 5 for the other Backpack Strap and your straps
should look like Fig. 7.
Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
BACKPACK STRAP INSTRUCTIONS
FIG. 1 FIG. 3
FIG. 4 FIG. 5
FIG. 7
FIG. 2
FIG. 6
©2013 (rev. 02/13)
WWW.PRIMALVANTAGE.COM

Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
BACKPACKING INSTRUCTIONS PAGE 1
1. Remove Seat Cushion from Seat Platform. Fold Seat Platform so rail is towards the cable. Screw the T-Knob back
on the bolt. Pull the Buckles out so they are not in the way.
2. Fold Foot Platform so that the rail is facing away from the cable towards the front of the platform. Screw the T-Knob
back on the bolt. Pull the Stabiling Straps out so they are not in the way.
3. Place Foot Platform on top and
between the armrests of the Seat
Platform. The folded part of the support
bar should be against the T-Knob of the
Seat Platform.
4. Wrap the Stabilizing Straps around the
Seat and Foot Platforms. This will hold the
platforms together.
©2013 (rev. 01/13)
WWW.PRIMALVANTAGE.COM

Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
BACKPACKING INSTRUCTIONS PAGE 2
7. Flip Platforms back over so that the Seat
Cushion is on the bottom. Thread the Seat
Cushion strap together.
Take the strap from the top of the Seat Cushion
and hook it to the Platfrom so it will stay in place.
5. Flip over the platforms so the bottom of the foot platform
is on top. Pull the backpack straps out to the sides. 6. Place the Seat Cushion upside down on top of the Foot
Platform. Put the straps of the Seat Cushion underneath the
backpack straps.
8. Insert each arm through the backpack straps
with the seat cushion against your back.
©2013 (rev. 01/13)
WWW.PRIMALVANTAGE.COM

Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
CLIMBING INSTRUCTIONS
NOTE:
Images used are for demonstration purposes only and may not depict the actual product.
Before beginning to climb: Check that your harness is secure, check that cables are properly secured, and make sure that the seat
straps on your seat section are off to the side, they should not obstruct the cable connecting to the tree in anyway while climbing.
Practice at ground level with your Full Body Harness.
Familiarize yourself with this product’s function so you feel comfortable with the climbing procedure.
1. LEAN on front bar of Seat Platform and lift your feet to raise Foot Platform. Push down to set Foot Platform in raised position. FIG.1
2. STAND AND LIFT up on Seat Platform to adjust it to a comfortable level. Push down to set Seat Platform in raised position. Raise
your harness tether to take up the slack. FIG. 2
3. Again, LEAN on front bar of Seat Platform and lift you feet to raise Foot Platform. Push down to set Foot Platform in raised position.
FIG.3
4. To continue climbing up tree, repeat steps 1 through 3. Continuously adjust your harness to keep strap above your head with minimum
slack.
5. When you have reached a comfortable height to hunt from, Secure the Stabilizing Straps so they are tight in a sitting position. The
pressure created on Seat Platform from securing the Stabilizing Straps will prevent Foot Platform from slipping down, should you decide
to stand and take pressure off Seat Platform.
6. Carefully remove one foot at a time from the foot straps. Slowly turn around never taking both feet off of the foot platform, you MUST
always have weight pressed on the foot platform.
7. Sit on the seat cushion, if any adjustment needs to be made to the seat placement, you MUST climb back to the ground and adjust on
the ground. Using a safe hoist/lift system, raise your unloaded weapon.
8. To climb back down the tree, reverse the process, always ensuring you are constantly adjusting your harness tether as you move.
FIG. 1 FIG. 2 FIG. 3
©2013 (rev. 01/13)
WWW.PRIMALVANTAGE.COM

Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869 ©2013 (rev. 11/12)
ALWAYS tug on strap to make sure it is secured by the buckle before use
Hold buckle as shown
1
Press down on latch and insert
strap underneath teeth as shown.
2
Pull strap to desired length.
3
Pull slack to tighten.
4
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
DETAILED BUCKLE AND STRAP INSTRUCTIONS
WWW.PRIMALVANTAGE.COM