FingerTec EM600 User manual

EM600 and EM1200 electromagnetic locks are cost effective accessories for a perfect access control system.The model
EM600 offers 520 lbs of holding force and is good for all types of doors, while the model EM1200 provides extra
holding power when required. Both models are easy to install and suitable for a large variety of applications. It has no
moving parts thus keeping maintenance to a minimum. All types of brackets are available as add-ons to ease
installation for both in-swing and out-swing doors.
INSTALLATION GUIDE
SPECIFICATIONS
A Strong Holding Power with
EM600 or EM1200
Electromagnetic Lock Series
EM600
EM1200
MODEL
PRODUCT DIMENSION (L X W X H),mm
POWER INPUT
CURRENT DRAW
HOLDING FORCE
TYPE
APPLICABLE TO
POWER SURGE PROTECTION
AUTHORIZATION CERTIFICATES
EM600 EM1200
250mm x 41 mm x 26 mm 265mm x 66mm x 40mm
DC12V DC24V
Stand-by: 250mA, Activity: 500mA
Approximately 520lbs Approximately 900lbs
Fail-Safe
Wooden Door, Glass Door, Grill and Gate
MOV
CE
Sexnut Bolt
Swing Door
Door Frame
Magnet
Armature
Rubber Washer
Steel Washer

www.fingertec.comwww.fingertec.com
Door
EM
Lock
Armature
Out-
swinging Filler
Door Frame
Door
EM
Lock
Armature
Out-
swinging
Filler
Adjustable L
Bracket
Door
EM
Lock
Armature
Out-
swinging
ZL
Bracket
Door
Frame
Door Leaf
Armature
Out-
swinging
Door Frame
Magnet
A
42mm
When “A” < 42mm, “L”
brackets must be used for
installation.
Out Door
OPTIONAL BRACKETS
MOUNTING DIAGRAM
L - Bracket
Z - Bracket
U – Bracket
Standard L – Bracket Z – Bracket
Authorized Reseller:
022013
©2013 FingerTec Worldwide Sdn. Bhd. All rights reserved.
• Adjustable "L" bracket for outward door when the header is narrow.
• Available for EM600 & EM1200 Series.
• Adjustable "ZL" bracket for inward door application.
• Available for EM600 & EM1200 Series application.
• Specially designed for glass door solution.
• Available for EM600 & EM1200 Series.
With Filler Plate attached on top of EM
Lock.
Mounting with "Adjustable L Bracket"
when door frame is narrow.
Mounting with " ZL Bracket " for
in-swing door application.
Mounting Procedure: Remove the original "Filler Plate" attached to the EM Lock,
and replace with " Adjustable L Bracket " set.