Fire Boltt BSW018 User manual

BSW018
User Manual
Smart Watch

Download and install FitCloudPro APP
Scan QR code with mobile phone to
download APP.
For IOS system, select APP Store,
search for FitCloudPro App.
1.
2.
3.
Android system, select Google Play to
download and install FitCloudProApp. Or
scan QR code to download
Downloading and connecting of smart watch with
FitCloudPro APP
Connect smart watch with FitCloudPro APP
Note: your mobile phone must support Android 5.1 or IOS 8.0 or
above, and Bluetooth 4.0 or above.
Click on "Add Device" to
connect the smart watch
FitCloudProAPP

Click on your device in the
device list scanned. Connect
it directly to Android system.
The IOS system will show a
Bluetooth pairing request
and you can click on
Bluetooth "Pairing" to
confirm.

Successfully connected

For both android & iOS click
on Push Notifications Tab in
the FitCloudPro app
Enable all the notifications
for the ease of use

The screen can be navigated by sliding left/right or sliding
up/down
Functions Navigation
Swipe
UP
Swipe
Left
Swipe
Left
Swipe
Right
Swipe
Right
Swipe
UP
Feature Pages
Messages
Control Center
Menu
Swipe
Down
Swipe
Down

Watch Face Functions Navigation and Button Instructions
The watch features a full touch control screen with a reflective
display and a rotating button
Functions Navigation
The screen can be navigated by sliding left/right or sliding
up/down
Slide down to view watch settings.
By default, the watch face page displays, and on the watch
face page, you can:
Slide up to view messages and other notifications.
Brightness
Sleep
Vibrate
Stopwatch
Flashlight
Wrist Wake Function
Karl John
Karl John

Slide right to view grid menu. Swipe down to continue
viewing the complete menu.
Slide left to view quick menu, which allows you to go to any
function with a single click.

Touch Button Operations
Short press from the side button
To unlock the screen in the lock screen status
Long press from the side button
To turn on the watch in the power off status

Plug the charger's USB port into a mobile phone charger or
a computer USB port to charge the watch.
Attach the charging pin to charge the smart watch.
The charging icon will appear on the screen, indicating that
the watch is being charged.
It is recommended to use computer USB ports or brand
mobile phone chargers to charge the watch.
Watch Wearing and Charging
It is recommended to wear the watch with a moderate tightness
at a distance two fingers far from your wrist to ensure that the
optical heart rate monitor works properly
Charging

The watch has a lot of functions, these can be accessed by
swiping left to the menu. A short brief of the functions are as
below:
Use of Functions
Weather
Home Screen
Messages
Data
Blood Pressure
Stopwatch
Exercise
Music
Timer
Sleep
Heart Rate
SpO2
Alarm
Setting
Find Device

Steps- The watch automatically tracks the step taken on the
screen. Note: Your movement stats reset to 0 at midnight.
Sleep - You need to wear the watch while sleeping, it will
provide the hours slept and quality of sleep stats.
Note: Sleep is recorded from 21:00 to 12:00 (noon of the
next day)
Exercise - This feature comprises of 15 exercise modes. Track
your fitness goals in a tap. You can view the following
activities: Walking outdoor, Walking indoor, Running outdoor,
Running indoor, Hiking, Cycling outdoor, Cycling indoor,
Basketball, Yoga, Elliptical trainer, Skipping, Rowing,
Swimming, Badminton, Cricket, Baseball, Tennis, Football,
Dumbbell, Free training.

Heart Rate - The watch will record your heart rate all day.
You can also tap on the page to start measuring. The
measurement value is based on PPG technology.
Oxygen Tracking (SPO2) - Tap the SPO2 page to start
measuring. The measurement value is based on PPG
technology.
Music - You can remote control the music player of your
phone once the watch is connected to the device

Weather - You can know the current weather, this
information is synced from your app.
Blood Pressure- Monitor your blood pressure by accessing
this function. The measurement value is based on PPG
technology.
Screen Time - You can adjust the screen time of the watch.
5, 10, 15, 20, 25 seconds

Stopwatch- You can begin and close any time line and stop
the watch.
Timer- A countdown timer lets you count the time forward
and allows the user to set goals and finish a particular event
on time.
Brightness- The brightness is a bar that you may click to
adjust
Alarm- When the alarm on the mobile phone rings, the watch
will vibrate to remind you that the alarm is ringing

Language - You can select the language of your choice and
convinience
Turn on wrist wake - This feature enables you to turn on the
wrist wake function and set a time like 1, 2, 3, 4, 5, 6 second
Vibrate - Turn the watch in vibrate mode.
Reset Device - This is a feature to reset all data, and you can
press and hold the touch button to reset, you shall get a
confirmation dialogue box after that. After a reset, you need
to re-connect the watch before use.

About : You can view the firmware version and Bluetooth
address of the watch in the about page.
App QR Code : This is a feature helps to download the app as it
gives a QR Code on the watch screen that is scannable.

Replace the Watch Face on the App:
Tap the Band Display settings entry in the "Device" ->
"BSW018" page, and then download and sync watch faces
on the Watch Face Store. After that, the replacement is
done.
Replace the Watch Face on the Watch:
Long Press the screen, you shall get the options to change
the watch face, scroll left and click on the watch face you
want to select. The watch face will set.
Slide left and go to Watch Face and swipe left and click to
select the watch face.
Watch Face
Other Settings
BSW018

If you are using an Android device, you need to include the App
into the whitelist or self-starting list of the mobile phone in
background settings and keep the App running in the
background to protect it from being detected and killed by the
mobile phone's background processes. Such background
processes could disconnect the watch and the App, and as a
result no reminder will be received. See "Mine" -> "BSW018" - >
"Setting" -> "Run in background" settings for different mobile
phone systems.
Notifications
During use, you need to enable the corresponding "Push
Notifications" on the FitCloudPro App, and keep the watch and
the mobile phone connected.
Enable Notifications
When the watch receives a notification alert, it will vibrate to
remind you and automatically display the notification content. If
you do not view the notification immediately, you may slide up in
the watch face page to go to messages and check the
notification
View Notifications

Exercise
Sliding left in the watch face page you can go to the exercise
function. For more information, see the "Introduction to the
Workout Function” section below.
Weather
In the weather page, you can view the weather for the day.
The weather displayed by the watch comes from the server.
Therefore, you need to keep the Bluetooth of your mobile phone
on and connect it with the watch to keep abreast of the latest
weather information changes.
In addition, when a weather alert is received, the watch will
receive the alert as well.
Watch Status Reminder
Incoming Call
When the watch receives incoming calls, it will vibrate to remind
you, also you can answer or reject the call.
Idle alerts
When you are sitting for a long time, the watch will vibrate to
remind you to get up for a while. Before using this function, you
need to enable Idle alerts by tapping "Device" -> "Activity/Drink
Reminder" and set the Idle alerts on the FitCloudPro App