
firststopbuyers.com
1. Turn the POWER ON by pressing the button for 4 to 5 seconds. The LED
display will turn BLUE indicating the device is in MP3 mode.
2. Switch to Photograph mode by pressing the button for 1 to 2 seconds. The LED
display will turn from BLUE to YELLOW.
3. Press the button to take a Photograph. The LED display will blink once while the
photograph is being taken.
Take a Photograph
1. Turn the POWER ON by pressing the button for 4 to 5 seconds. The LED
display will turn BLUE indicating the device is in MP3 mode.
2. Switch to Record mode by pressing the button for 1 to 2 seconds. The LED
display will turn from BLUE to YELLOW (continuous blinking) and begin to record.
3. To stop recording, press the button again for 1 to 2 seconds. The video will
save and the LED display will stop blinking.
Record a Video
Should the device not work properly, for example it will not turn off or on, a reset may
need to be performed. Stick the end of a paper clip in the reset hole and press gently
until a small click is felt. The unit should now be reset and work properly.
Reset
Notes
• Avoid using in extreme hot, cold, dusty, or damp environment.
• Do not rub or bump against hard objects. Doing so may cause scracthes, battery
failure, or damage to internal hardware.
• Avoid static electricity.
• When formatting device or copying files, do not stop the connection suddenly. Doing
so may cause program failure.
• When using as a movable hard drive, please store and extract files according to the
computers operating system. We will not be responsible for any lost files caused by
improper use.