Memorex MMP9008 - 8GB USB 2.0 User manual

MMP9008
www.memorexelectronics.com
Imation Electronic Products, A Division of Imation Enterprises Corp. Weston, FL
Printed in China / Impreso en China
Memorex, el logotipo de Memorex y la frase "Is it live or is it Memorex?"
Job # MMP9008 manual cover
Colors: 1-color print
Pantone 533c
Please read these instructions
completely, before operating
this product.
Por favor lea toda las
instruciones antes de tratar
de usar este producto.
FO LD
FO LD
8GB
4.75” (120.6mm) wide
4.75” (120.6mm) high

TABLE OF CONTENTS
1
Precautions.....................................................2
FCC Declaration.............................................3
EIA Guidelines................................................4
Location of Controls .......................................6
Charging the Battery ......................................7
Using the Strap...............................................8
Installing the Software.................................8
• Installing Windows Media Player 10..........9
• Installing Windows Media Player 11........12
• Installing MediaCoder..............................14
Downloading and Transferring Files.............16
Using MediaCoder........................................19
Safely Remove ardware ............................20
General Operation ......................................21
• Turning the Power On/Off........................21
• Menu Button ............................................21
• Inserting/Removing an External
Memory Card (Micro SD).........................21
• eadphones Jack....................................22
• Volume Buttons .......................................22
• Lock Function ..........................................22
Main Menu....................................................23
Operation– usic Playback ode .............24
• To Listen to MP3s/WMAs ........................24
• igh-Speed Music Search.......................26
• Forward/Reverse Skip .............................27
• A-B Repeat Playback ..............................27
• Music Contextual Menu...........................28
Operation–Video Playback ode..............33
• To Watch Videos......................................33
• igh-Speed Video Search.......................34
• Forward/Reverse Skip .............................34
Operation–Photo Playback ode .............35
• To View Photos........................................35
• Photo Contextual Menu...........................36
Operation–F Radio ode........................40
• To Listen to the FM Radio .......................40
• To Add Presets ........................................41
• To Load Presets.......................................41
• To Delete a Preset...................................42
• To Record the FM Radio .........................42
• To Automatically Set Presets...................43
• Manual Search ........................................43
Operation-Ebook ode..............................44
• To View and Ebook..................................44
Operation–Recorder ode ........................45
• To Create a Voice Recording...................45
• Recorder Contextual Menu......................46
Operation-Browse ode............................49
Settings enu.............................................50
Extras menu................................................61
Troubleshooting Guide .................................65
Formatting the Player...................................67
Resetting the Unit.........................................68
Updating the Firmware.................................68
Specifications ...............................................69

COPYRIGHT:
• Distributing copies of MP3, WMA, WMA with DRM tracks and/or WMV files without
permission is a violation of international copyright laws.
• This Product is protected by certain intellectual property rights of Microsoft. Use or
distribution of such technology outside of this product is prohibited without a license from
Microsoft.
SAFETY:
• Vibration experienced during walking or exercising will not affect the player. owever,
dropping the player or dropping a heavy object on the player may result in damage or
sound distortion.
• Avoid spilling any liquid onto or into the player.
• Do not leave the player in a location near heat sources; in a location subject to direct
sunlight, excessive dust, sand, moisture, rain or mechanical shock; on an unlevel surface;
or in a car with the windows closed during periods of excessive heat.
ROAD SAFETY:
• Do not use headphones while driving, cycling or operating any motorized vehicle. It may
create a traffic hazard and it is illegal in some areas. It can be potentially dangerous to
play your headset at a high volume while walking, especially at pedestrian crossings. You
should exercise extreme caution or discontinue use in potentially hazardous situations.
FCC WARNING:
• This equipment may generate or use radio frequency energy. Changes or modifications
to this equipment may cause harmful interference unless the modifications are expressly
approved in the instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
PRECAUTIONS
2
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003
du Canada.

3
FCC DECLARATION
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: 1) This device may not cause harmful interference, and 2) This device must
accept any interference received, including interference that may cause undesired
operation.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
owever, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Shield cable must be used with this unit to ensure
compliance with class B FCC limits.

Dear Customer:
Selecting fine audio and video equipment such as the unit you’ve just purchased is
only the start of your musical enjoyment. Now it’s time to consider how you can
maximize the fun and excitement your equipment offers. This manufacturer and the
Electronic Industries Association’s Consumer Electronics Group want you to get the
most out of your equipment by playing it at a safe level. One that lets the sound come
through loud and clear without annoying blaring or distortion and, most importantly,
without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher
volumes of sound. So what sounds “normal” can actually be loud and harmful to your
hearing. Guard against this by setting your equipment at a safe level BEFORE your
hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without
distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future.
After all, we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment.
Since hearing damage from loud noise is often undetectable until it is too late, this
manufacturer and the Electronic Industries Association’s Consumer Electronics Group
recommend you avoid prolonged exposure to excessive noise. This list of sound levels
is included for your protection.
4

Decibel
Level Example
30 Quiet library, soft whispers
40 Living room, refrigerator, bedroom away from traffic
50 Light traffic, normal conversation, quiet office
60 Air conditioner at 20 feet, sewing machine
70 Vacuum cleaner, hair dryer, noisy restaurant
80 Average city traffic, garbage disposals, alarm clock at two feet
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE:
90 Subway, motorcycle, truck traffic, lawn mower
100 Garbage truck, chain saw, pneumatic drill
120 Rock band concert in front of speakers, thunderclap
140 Gunshot blast, jet engine
180 Rocket launching pad
Information courtesy of the Deafness Research Foundation.
5
A
S
S
O
C
I
A
T
I
O
N
EST. 1924
E
L
E
C
T
R
O
N
I
C
I
N
D
U
S
T
R
I
E
S
EIA
We
LISTENING
For A Lifetime
Want You

LOCATION OF CONTROLS
6
2
3
5
4
1
7
6
8
9
10
11
12
13
14
15
1. A-B/• Button
2. Navigation ▲/Volume Up Button
3. Menu Button
4. Display
5. Navigation ▼/Volume Down Button
6. Power/Lock Switch
7. Navigation Right/Skip–Search n
Button
8. Micro USB Slot (USB CABLE PART
NO. T225-030486-910*)
9. Enter/Play/Pause ®p Button
10. eadphones Jack
(HEADPHONES PART NO.
TR11-C12171-B00*)
11. Navigation Left/Skip–Search o
Button
12. Reset ole (Rear of Unit)
13. Mic (Rear of Unit)
14. Strap oles (Side of Unit)
15. Micro SD Memory Card Slot
(Bottom of Unit)
*Consumer Replaceable Part
(See page 70 to order.)

CHARGING THE BATTERY
7
This unit has a built-in Lithium Polymer rechargeable battery. When the bars
in the battery indicator (in the display) become low (see Figure 1) and before
using the unit for the first time, recharge the battery as follows.
1. Connect the USB cable to the USB jack on this unit (as
shown) and to the USB port on your computer; “USB
CONNECTED” and “C ARGING” will appear on the
screen. Once the battery is fully charged, “Fully Charged”
will appear.
NOTES:
• To disconnect this unit from your computer, make sure to
follow the “Safely Remove ardware” instructions on page 20.
• You must charge this unit for three hours before using for the first time.
• It takes approx. 3 hours to charge the battery from empty to full. When fully charged,
the unit can play back for approx. 20 hours in Music Playback mode. (Actual play back
times may vary.)
• For data transfer, please use the USB cable (included) to connect the unit to
your computer.
• When the battery is empty and connected to the computer for charging, it may take a
few minutes for the “USB CONNECTED” screen to be displayed.
Figure 1

8
Software Installation CD (PART NO. TR00-406982-010*) General Information
This unit is compatible with Microsoft Windows XP ( ome or Professional Edition with
Service Pack 2 or higher) or Vista. The MediaCoder is compatible with Microsoft
Windows XP and Vista.
For icrosoft Windows XP:
Use the CD to install MediaCoder and Windows Media Player (10 or 11).
Windows will automatically detect the audio player without installing the CD software
when the USB cable is connected.
*Consumer Replaceable Part (See page 70 to order.)
INSTALLING THE SOFTWARE
USING THE STRAP
Insert the rope through the hole in
the main unit.
1
Insert the end of the Strap through
the rope’s loop until snug.
2

9
WINDOWS EDIA PLAYER 10 INSTALLATION
Windows Media Player 10 is for use with Windows XP only. See page 12 for how to install
Windows Media Player 11. (Windows Vista users must use Windows Media Player 11.)
Once you have installed Windows Media Player 10, you can transfer MP3 files, WMA files,
WMA files with DRM 10 to your player using the “Sync” function.
1. Insert the installation CD-Rom into the CD Drive,
then the installation screen will appear. If the
installation screen doesn't automatically appear,
double-click My Computer, then double-click on the
CD drive; the installation screen will appear. Click
“Download & Install Windows Media Player 10 or
11”.
2. You will be directed to the Windows Media
Download Center. Select Download (Windows
Media Player), Version (Player 10 [for Windows
XP] and Language. Then, click “Download Now”.
At the pop-up window, click “Run” to run
“MP10Setup.exe”. Click “Run” again.
Installation will begin.
NOTE: Please install WMP10 or 11, otherwise
the unit may not be detected by your computer.
3. Read the License Agreement, then click
I ACCEPT.

10
4. Installation will continue.
5. At the Welcome screen, click NEXT.
6. Select the desired privacy options.
WINDOWS EDIA PLAYER 10 INSTALLATION

11
7. Click on Privacy Statement to view the
Statement, if desired. When finished, click
“Next”.
8. Read the instructions and tick the check
boxes as desired. Then click on the More
Options tab and tick the check boxes as
desired.
9. Click “Finish” to finish the installation of
Windows Media Player 10.
WINDOWS EDIA PLAYER 10 INSTALLATION

12
WINDOWS EDIA PLAYER 11 INSTALLATION
Once you have installed Windows Media Player 11, you can transfer MP3 files, WMA
files, WMA files with DRM 10 and photos to your player using the “Sync” function.
1. Insert the installation CD-Rom into the CD
Drive; the installation screen will appear. If the
installation screen doesn't automatically
appear, double-click My Computer then double-
click on the CD drive; the installation screen will
appear. Click “Download & Install Windows
Media Player 10 or 11”.
2. You will be directed to the Windows Media
Download Center. Select Download (Windows
Media Player), Version (Player 11 [for Windows
XP]) and Language. Then, click “Download Now”.
At the pop-up window, click “Run” to run “wmp11-windowsxp-x86-enu.exe”. Click
“Run” again. Installation will begin.
3. A “Validate Your Copy of Windows” screen will
appear. If desired, click on “Microsoft Genuine
Advantage Privacy Statement” to read it.
Click “Validate”.

13
4. Read the License Agreement, then click
“I Accept”.
5. Installation will continue.
6. At the Welcome screen, it is recommended to
select “Express Settings” and then click on
“Finish”. The newly-installed Windows Media
Player 11 will open. You may also see a pop-
up window asking, “A Windows Media Player
update is available. Do you want to update
now?” Follow the on-screen prompts if you
choose to update at this time.
WINDOWS EDIA PLAYER 11 INSTALLATION

14
INSTALLING EDIACODER
Procedure to Install ediaCoder
1. Insert the installation CD-Rom into the CD
Drive; the installation screen will appear. If the
installation screen doesn't automatically
appear, double-click My Computer then
double-click on the CD drive, then the
installation screen will appear. After selecting
“Install PC Software”, click “Download & Install
MediaCoder for Windows”.
2. The “Welcome” screen will appear. Click
“Next”.
3. The “License Agreement” screen will appear.
Select “I agree”.

15
INSTALLING EDIACODER
4. The “Installation Folder” screen will appear. It
is recommended to keep the folder as is. Then
click “Install”; the program will then install.
5. After the program is done installing, the
“Completing Setup Wizard” screen will appear.
Click “Finish” to end installation. See page 19
for how to use MediaCoder.

TRANSFERRING FILES
You can download digital music files from the Internet or use
encoding software to convert music that you have on an audio CD
into MP3 or WMA format. Once these files are stored on your
computer, you can easily copy them to your player.
If you have already installed W P (Windows edia Player) 10
or 11, you can transfer music files (MP3, WMA and/or WMA files
with DRM 10) and photos and videos to the player through the
"Sync" function of WMP 10 or 11. Connect your player to the USB
port on your computer as shown to the right.
Ebook File Transfer:
To transfer a TXT Ebook file to your unit, connect it as shown
above. Open the “MTP Player” or “Media Player” window and then
open the TXT folder. Drag and drop TXT files in to this TXT folder.
EDIA FILES SUPPORTED FOR ATS
Audio Formats: MP3, WMA files with DRM 10 with a bit rate of 48-192 kbps
Video Formats: AVI- PEG4 Simple Profile (320x240 resolution 20-24 fps, 385kbps);
W V - VC-1 Simple Profile (220x176 resolution, 30fps, 385kbps max)
Photo Format: Baseline JPEGs
Ebook Format: TXT
DOWNLOADING AND TRANSFERRING FILES
16

DOWNLOADING AND TRANSFERRING FILES (CONT.)
17
CONVERTING AN AUDIO CD INTO P3 OR W A
FOR AT
For Windows XP, you can also utilize the previously
installed Windows Media Player 10 or 11 software to
convert music on an audio CD into MP3 or WMA
format as follows:
1. Open the Windows Media Player 10 or 11
Browser, then click on the “Rip” icon on the top
tool bar. Insert a Music CD into the CD-Rom
drive of your computer.
2. Click on the “Tools” menu option at the top menu
bar, then click on “Options”; the Option setting menu will
appear. Click on Rip Music and set the Rip Music to the
desired location on your computer. Then, set the desired
format for the newly ripped music (MP3 format or
Windows Media Audio format). Adjust the audio quality as
desired. When finished, click “OK” to confirm the settings.
3. Click on the “Rip Music” icon to start ripping the music to
your computer.
4. When the music tracks are ripped; connect the player to
your computer. Open the “MTP Player” or “Media Player”
window and open the ripped music location window.
5. To add the transferred/ripped music files/songs to your
player simply drag and drop the MP3 and/or WMA files
into the “MTP Player” or “Media Player” window.
6. When the files are finished loading into the player, you
can follow the “Safely Remove ardware” procedure as shown on page 20.
NOTES:
• For Windows Media Player 11 users, please visit the following link for instructions on how to
rip (copy) songs from CDs to your computer:
http://www.microsoft.com/windows/windowsmedia/knowledgecenter/howto/mp11/rip.aspx
• Windows Vista users must use Windows Media Player 11 to convert music on an audio CD
into MP3 or WMA format.

TRANSFERRING P3/W A/VIDEO/PHOTO FILES AND
W A FILES WITH DR 10 USING WINDOWS EDIA
PLAYER 10 (FOR WINDOWS XP ONLY)
To transfer MP3/WMA/P OTO/VIDEO/WMA files with DRM 10
to the player, follow the procedure described below using the
previously installed WMP (Windows Media Player) 10. Before
beginning the procedure, please connect the unit to the
computer as previously described.
1. Open the “Windows Media Player Browser 10” and click on
“Sync”.
2. Click on the “Sync List” pull-down menu to locate the music
files you wish to download. Then make sure to tick the box
next to the files.
3. Select the Portable Device (“MTP Player” or “Media Player”)
that you want to copy to from the right side drop-down
menu. Click “Start Sync” to start transferring music files to
the player.
4. After you are finished transferring all the desired files to your
unit, follow the “Safely Remove ardware” procedure on
page 20.
NOTES:
• For WMA files with DRM 10, the files will not be played if you
transfer the files into the micro SD card’s memory. You must
transfer the WMA files with DRM 10 to the player’s internal
memory for playback.
• If the external card is inserted, the memory card indicator
will appear at the top of the screen.
• For Windows Media Player 11 users, please visit the following link for instructions on how to rip
(copy) songs from CDs to your computer:
http://www.microsoft.com/windows/windowsmedia/knowledgecenter/howto/mp11/rip.aspx
• Windows Vista users must use Windows Media Player 11 to convert music on an audio CD into
MP3 or WMA format.
DOWNLOADING AND TRANSFERRING FILES (CONT.)
18

You can use the previously installed MediaCoder to convert MPG, MPG4, ASF, AVI and
WMV files to AVI files supported by the player.
1. Open the previously installed MediaCoder
program.
2. Click the “Add file” icon to add files for
conversion. In the “Add file” window select
the source file you want to convert and click
the “Open” button. Repeat this procedure if
you want to add other files for conversion.
3. Set up the Destination Path for the converted
files. In the “Output Folder”, type the path of
the directory where the converted files will be
saved.
4. Click “Start” to begin the conversion.
5. When “Transcoding Completed” appears, the file has been converted.
6. Now you can convert additional files according to the above procedures, if desired.
NOTE: See page 16 for how to transfer files to the unit.
USING EDIACODER
19