FITBENCH FB-FLEX-01 User manual

!
!
!
FITBENCH LLC | 925 N Genesee Street, Unit 108350, Delafield, WI 53018 FITBENCH
FITBENCH.COM
US and International Patent Pending
© 2018 FITBENCH FLEX, LLC All Rights Reserved
1
!
MANUAL
MODEL #FB-FLEX-01
UPDATED!1-1-2018!
!
! !

!
!
!
FITBENCH LLC | 925 N Genesee Street, Unit 108350, Delafield, WI 53018 FITBENCH
FITBENCH.COM
US and International Patent Pending
© 2018 FITBENCH FLEX, LLC All Rights Reserved
2
!
Thank you for purchasing the FITBENCH!
The FITBENCH FLEX has product features that allow for a wide variety of
workout options. The FITBENCH FLEX also has a soft-close piston shock
for the bench top.
If you have any questions on your FITBENCH FLEX, please call us at 800-
294-0536 or email us at [email protected] and include the following
information:
• Customer Name and Address
• Telephone Number
• Email Address
• FITBENCH FLEX Serial Number
!
!
!
!
!
!
!
!
!

!
!
!
FITBENCH LLC | 925 N Genesee Street, Unit 108350, Delafield, WI 53018 FITBENCH
FITBENCH.COM
US and International Patent Pending
© 2018 FITBENCH FLEX, LLC All Rights Reserved
3
!
TABLE OF CONTENTS
IMPORTANT!SAFETY!INSTRUCTIONS!............................................................................................................!4!
ASSEMBLY!INSTRUCTIONS!and!ACCESSORY!PLACEMENT!............................................................................!5!
DUMBELL!SIZES!............................................................................................................................................!6!
DUMBBELL!LOCATION!..................................................................................................................................!7!
KETTLEBELL!SIZES!.........................................................................................................................................!8!
KETTLEBELL!LOCATION!.................................................................................................................................!9!
SLAM!BALL!SIZE!..........................................................................................................................................!10!
SLAM!BALL!LOCATION!................................................................................................................................!11!
GENERAL!MAINTENANCE!INFORMATION!..................................................................................................!12!
FITBENCH!FLEX!WORKOUT!IDEAS!..............................................................................................................!13!
Leg!Exercises!..........................................................................................................................................!13!
Core!Exercises!........................................................................................................................................!15!
Chest!Exercises!.......................................................................................................................................!16!
Arm!Exercises!.........................................................................................................................................!18!
Back!Exercises!........................................................................................................................................!21!
Shoulder!Exercises!..................................................................................................................................!22!
“The!FITBENCH!300”!..............................................................................................................................!23!
WARRANTY!.................................................................................................................................................!24!
!
!
!

!
!
!
FITBENCH LLC | 925 N Genesee Street, Unit 108350, Delafield, WI 53018 FITBENCH
FITBENCH.COM
US and International Patent Pending
© 2018 FITBENCH FLEX, LLC All Rights Reserved
4
!
IMPORTANT SAFETY INSTRUCTIONS
Before beginning any fitness program, you should obtain a complete
physical examination from your physician. When using the FITBENCH
FLEX, basic precautions should always be taken, including the following:
1. Read all instructions before using the FITBENCH FLEX. These
instructions are written to ensure your safety and to protect the unit.
2. Use the FITBENCH FLEX only for its intended purpose. Do not use
accessory attachments that are not recommended by FITBENCH,
LLC.
3. The product should only be used on a level surface. Allow enough
space around the FITBENCH FLEX to perform all possible exercises.
4. Do not allow children on or near the FITBENCH FLEX unless
supervised by an adult.
5. Do not attempt to lift more weight than you can control safely. If you
should feel pain or abnormal symptoms, stop your workout
immediately and consult your physician.
6. Never use the FITBENCH FLEX if it has been damaged. Always
inspect the FITBENCH FLEX for damage prior to use.
7. Keep hands, limbs, loose clothes, and long hair well out of the way of
moving parts.
8. Wear proper exercise clothing and shoes for your workout. No loose
clothing.
!
!
!
!
!
!

!
!
!
FITBENCH LLC | 925 N Genesee Street, Unit 108350, Delafield, WI 53018 FITBENCH
FITBENCH.COM
US and International Patent Pending
© 2018 FITBENCH FLEX, LLC All Rights Reserved
5
!
ASSEMBLY INSTRUCTIONS and
ACCESSORY PLACEMENT
The FITBENCH FLEX requires no assembly other than placing the
dumbbell weights, kettlebells, slam ball and resistance band package in
their designated locations.
It is recommended that once you have the FITBENCH FLEX removed from
its packaging, you place the FITBENCH FLEX in its desired location before
installing the dumbbell weights, kettlebells, slam ball and resistance band
package.

!
!
!
FITBENCH LLC | 925 N Genesee Street, Unit 108350, Delafield, WI 53018 FITBENCH
FITBENCH.COM
US and International Patent Pending
© 2018 FITBENCH FLEX, LLC All Rights Reserved
6
!
DUMBELL SIZES
There are six sets of dumbbells that come with the FITBENCH FLEX.
Depending on your location, you may have received dumbbells in
POUNDS or KILOGRAMS.
Pound Sizes:
• 5 Lbs. X 2
• 10 Lbs. X 2
• 15 Lbs. X 2
• 20 Lbs. X 2
• 25 Lbs. X 2
• 30 Lbs. X 2
Kilogram Sizes:
• 2 Kg. X 2
• 4 Kg. X 2
• 6 Kg. X 2
• 10 Kg. X 2
• 12 Kg. X 2
• 14 Kg. X 2
!

!
!
!
FITBENCH LLC | 925 N Genesee Street, Unit 108350, Delafield, WI 53018 FITBENCH
FITBENCH.COM
US and International Patent Pending
© 2018 FITBENCH FLEX, LLC All Rights Reserved
7
!
DUMBBELL LOCATION

!
!
!
FITBENCH LLC | 925 N Genesee Street, Unit 108350, Delafield, WI 53018 FITBENCH
FITBENCH.COM
US and International Patent Pending
© 2018 FITBENCH FLEX, LLC All Rights Reserved
8
!
KETTLEBELL SIZES
There are two kettle bells that come with the FITBENCH FLEX. Depending
on your location, you may have received kettlebells in POUNDS or
KILOGRAMS.
Pound Sizes:
• 20 Lbs. X 1
• 30 Lbs. X 1
Kilogram Sizes:
• 8 Kg. X 1
• 12 Kg. X 1
!
!
!
!
!
!
!
!
!

!
!
!
FITBENCH LLC | 925 N Genesee Street, Unit 108350, Delafield, WI 53018 FITBENCH
FITBENCH.COM
US and International Patent Pending
© 2018 FITBENCH FLEX, LLC All Rights Reserved
9
!
KETTLEBELL LOCATION
!
!
!
!
!

!
!
!
FITBENCH LLC | 925 N Genesee Street, Unit 108350, Delafield, WI 53018 FITBENCH
FITBENCH.COM
US and International Patent Pending
© 2018 FITBENCH FLEX, LLC All Rights Reserved
10
!
SLAM BALL SIZE
There is one slam ball that comes with the FITBENCH FLEX. Depending
on your location, you may have received the slam ball in POUNDS or
KILOGRAMS.
Pound Sizes
• 15 Lbs. X 1
Kilogram Sizes
• 7 Kg. X 1
SLAM!BALL!LOCATION

!
!
!
FITBENCH LLC | 925 N Genesee Street, Unit 108350, Delafield, WI 53018 FITBENCH
FITBENCH.COM
US and International Patent Pending
© 2018 FITBENCH FLEX, LLC All Rights Reserved
11
!
SLAM BALL LOCATION

!
!
!
FITBENCH LLC | 925 N Genesee Street, Unit 108350, Delafield, WI 53018 FITBENCH
FITBENCH.COM
US and International Patent Pending
© 2018 FITBENCH FLEX, LLC All Rights Reserved
12
!
GENERAL MAINTENANCE
INFORMATION
Vinyl Top:
• To ensure prolonged FITBENCH FLEX vinyl top life and proper hygiene, the
entire FITBENCH FLEX top should be wiped clean with a damp cloth after every
workout.
• Periodically take the time to use a mild soap or an approved disinfectant to clean
the composite top. Avoid using any abrasive cleaners.
• Replace ripped or worn FITBENCH FLEX vinyl top immediately.
• Keep sharp or pointed objects clear of the FITBENCH FLEX composite top.
Decals:
• Inspect and familiarize yourself with any safety warnings or other user
information posted on each decal.
Nuts and Bolts:
• Inspect all nuts and bolts for any loosening, and tighten if needed. Go through a
re-tightening sequence periodically to ensure that all nuts and bolts are tightened
properly.

!
!
!
FITBENCH LLC | 925 N Genesee Street, Unit 108350, Delafield, WI 53018 FITBENCH
FITBENCH.COM
US and International Patent Pending
© 2018 FITBENCH FLEX, LLC All Rights Reserved
13
!
FITBENCH FLEX WORKOUT IDEAS
Leg Exercises
Quadriceps
1) FITBENCH FLEX “wall” squat: Adjust the FITBENCH FLEX top to the highest position
(should be near 90-degrees). With your feet slightly wider than shoulder-width apart, sit back
and rest your back on the top. Your knees should be at a 90-degree angle and your hamstrings
should be parallel to the floor. Hold your arms straight out in front of you, parallel to the floor –
palms facing down. Hold this position for as long as possible.
• Increased difficulty: You can increase the intensity by performing the same
exercise, but also holding dumbbells in either hand, letting them hang at your
sides. You can also slowly lift one leg 2 inches off floor, replace, and then lift the
other 2 inches off floor and replace. Repeat doing this until you no longer can.
2) FITBENCH FLEX box jump: Stand in front of the FITBENCH FLEX on the long side with feet
shoulder-width apart. Dip your knees and jump onto the FITBENCH FLEX with a soft landing.
(Note: try to land as light as possible and make very little noise – this will recruit more muscle
fibers.) Step down, reset feet, and repeat. This exercise can also be done with the slam ball for
an added challenge.
3) Single leg FITBENCH FLEX squat: Stand on top of the FITBENCH FLEX standing on your
left leg. Hold your arms straight out in front of you. Keep your core engaged and torso as
upright as possible. Balancing on your left foot, bend your left knee, and slowly lower your body
until the top of your thigh is parallel to the floor. Pause, then push your body back up to starting
position. Do this several times with your left leg, then switch to your right leg.
4) Kettlebell goblet squat: Grab one of the kettlebells with both of your palms cupping the ball
portion of the kettlebell. Hold the kettlebell close to your chest, standing upright with your
elbows pointing down at the floor. Squat down as deep as possible, pause, then push yourself
back to the starting position.
5) Dumbbell jump squat: Grab a pair of dumbbells at arm’s length at your sides with your
palms facing each other. Dip your knees down low and explosively jump as high as you can.
Land as softly as possible on the balls of your feet and repeat.
• Increased difficulty: Try doing a shrug and curl at the top of your jump and
landing with the dumbbells at your shoulders.

!
!
!
FITBENCH LLC | 925 N Genesee Street, Unit 108350, Delafield, WI 53018 FITBENCH
FITBENCH.COM
US and International Patent Pending
© 2018 FITBENCH FLEX, LLC All Rights Reserved
14
!
6) Slam ball Bulgarian split squat: Grab the slam ball from the FITBENCH FLEX. Put the top
of your left foot on the top of the FITBENCH FLEX with your right foot on the floor, a stride
away. Press the slam ball above your head with a slight bend in your arm. Squat down until
your left knee just hovers over the floor. Pause and press back to starting position. (Remember
to never let your front knee go past your front toes.) Do several reps, then switch.
7) Dumbbell slit jump: Grab two dumbbells (medium/light weight). From a standing position,
lower your body into a split squat. Keep your torso upright and core engaged. Jump up with
enough force to get both feet off the floor. While in the air, scissor-kick your legs so you land
with the opposite leg forward. Land softly and repeat – alternating back and forth between each
repetition.
Calf Exercises
1) Dumbbell calf raise: Grab one 30lb dumbbell from the FITBENCH FLEX and place it on the
floor. Increase the FITBENCH FLEX top to the max height, as you will use this for stabilization.
Place your right foot onto the handle of the dumbbell, adjusting so the ball of your foot is over
the handle. With a straight leg and torso, raise your heel off the floor as high as possible. Pause,
lower, and repeat. The FITBENCH FLEX top can be used for balance. Do several reps and then
switch legs.
2) Straight leg calf hop: Standing straight up with good posture and feet just inside your
shoulders, jump up using just your calf muscles to propel you off the floor. Go for height. Land
and repeat, doing quick hops. Grab a pair of light dumbbells to make this exercise more
challenging.
Hamstring Exercises
1) Single leg hip raise with foot on FITBENCH FLEX: Place your right heel on the
FITBENCH FLEX with your back and butt on the floor. Extend your left leg straight out and
press your hips up with your right leg, until hips are in line with torso as well as your left
extended leg. Do several reps, then switch.
2) Single leg dumbbell straight leg deadlift: Grab a set of heavy dumbbells and hold them at
either side of your body (overhand grip). Stand with your feet shoulder-width and knees slightly
bent. Balance on your right leg and bend at your hips. Do not change the bend in your right
knee and keep your left leg in line with your torso. Lower your torso until parallel with the floor.
Pause, then return to the starting position. Do several reps, then switch.

!
!
!
FITBENCH LLC | 925 N Genesee Street, Unit 108350, Delafield, WI 53018 FITBENCH
FITBENCH.COM
US and International Patent Pending
© 2018 FITBENCH FLEX, LLC All Rights Reserved
15
!
3) Single arm kettlebell swing: Grab a kettlebell with an overhand grip and hold it in front of
your waist at arm’s length. With feet slightly wider than shoulders, bend at your hips and knees
and lower your torso until it forms a 45-degree angle to the floor. Swing the kettlebell between
your legs with your arm straight, thrust your hips forward, and straighten your knees. Swing the
kettlebell up to chest level as you raise to standing position. Squat back down as you swing the
kettlebell back through your legs in a fluid motion and repeat.
4) Standing resistance band hip abduction: Grab a resistance band from the storage area
under the FITBENCH FLEX top. Attach the ankle strap to your right ankle and attach the
carabiner to one of the lower anchor points on the FITBENCH FLEX. Stand just far enough
away from the FITBENCH FLEX to where the resistance band has slight tension in it. With your
left hip facing the anchor point, cross your right leg in front of your left and raise your right leg
away from the FITBENCH FLEX as far as you, can keeping a straight leg. Pause, then return to
starting position. Do this several times and then switch.
5) Hamstring dumbbell curl: Grab one light/medium weight dumbbell, and get on hands and
knees on top of the FITBENCH FLEX. Place the dumbbell behind your right knee so it fits in the
crease of your knee. While keeping your knee in the bent position, raise your right leg up so the
bottom of your foot points to the sky and the top of your thigh is parallel to the floor. Pause, then
return to starting position. Do this several times and then switch.
• Increased difficulty: Do the same exercise, but when your thigh is parallel and
the bottom of your foot is up towards the sky, raise your leg out perpendicular to
your body (like a dog marking its territory). Pause at the top, then return to thigh
parallel to the floor and bottom of foot to the sky. Then go back to the start of
the exercise on hands and knees. Repeat.
6: Slam ball step up with press: Grab the slam ball and hold it at your chest. Standing
perpendicular to the FITBENCH FLEX, step up with your right leg. Before you get to full
standing position on top of the FITBENCH FLEX, raise up your left knee so it is at hip height
and press the slam ball above your head. Pause, then return to starting position. Do several
reps, then switch legs.
Core Exercises
1) 45-degree FITBENCH FLEX plank: Position body perpendicular to FITBENCH FLEX. Place
forearms on the FITBENCH FLEX and put your body in a plank position. Arms should be at a
90-degree angle. Hold this position until you can no longer keep your hips in line with your torso.

!
!
!
FITBENCH LLC | 925 N Genesee Street, Unit 108350, Delafield, WI 53018 FITBENCH
FITBENCH.COM
US and International Patent Pending
© 2018 FITBENCH FLEX, LLC All Rights Reserved
16
!
2) Side plank with feet on FITBENCH FLEX: Position body perpendicular to FITBENCH
FLEX. Place feet stacked up on FITBENCH FLEX top with right forearm on the floor. Raise
your torso and hips up so your body is in a straight line and hold until hips start to go out of line
with the rest of your body. Lower down and change sides.
• Increased difficulty: Do the side plank, but instead of resting on elbow and
forearms, extend arm up so you are resting on your right palm and raise your left
arm to the sky. Your body should look like a “T”. Hold this position for 30
seconds, then lower and change sides.
3) Mountain climber on FITBENCH FLEX: Assume the pushup position with your body
perpendicular to the FITBENCH FLEX and your hands on the top. Engage your core. Lift your
right foot off the floor and slowly raise your knee as close to your chest as possible. Return to
starting position and quickly do the same move with your left knee. Alternate back and forth – 1
rep counts for one right leg raise and one left leg raise.
4) FITBENCH FLEX leg raise: Lay on your back on top of the FITBENCH FLEX and position
your body so your legs are hanging off and your butt is on the edge of the FITBENCH FLEX top.
Hold onto the sides of the FITBENCH FLEX and raise your straight legs up to above 45-
degrees. Pause, then return your legs back to parallel to the floor. Do this exercise several
times.
5) Russian twist: Sit on top of the FITBENCH FLEX with your feet flat and your knees bent.
Hold your arms straight out in front of you with your palms together. Lean back so your torso is
at 45-degrees to the top. Engage your torso and rotate to the right as far as you can. Pause,
then rotate your torso as far to the left as you can. 1 rep counts for one twist to the right and
one twist to the left.
• Increased difficulty: Russian twist with a slam ball: This exercise can also be
done with a slam ball or a lighter weight. Instead of holding arms straight out in
front of you, hold the weight out and rotate from left to right in a controlled
fashion.
Chest Exercises
1) Incline pushup: Place your hands on the FITBENCH FLEX – body in plank, then pushup.
2) Decline pushup: Place feet on FITBENCH FLEX - hands on the floor in plank position,
pushup.

!
!
!
FITBENCH LLC | 925 N Genesee Street, Unit 108350, Delafield, WI 53018 FITBENCH
FITBENCH.COM
US and International Patent Pending
© 2018 FITBENCH FLEX, LLC All Rights Reserved
17
!
• Increased difficulty: Try single leg decline pushup – same as decline pushup,
but raise one leg into the air, engage the core, and do pushups.
3) Single arm slam ball pushup: In plank position, place one hand on slam ball, do a pushup.
Roll the ball over to the other hand while engaging the core, do another pushup – repeat.
4) Slam ball pushup: Place both hands on slam ball, body in plank, engage the core, and do a
pushup.
5) Dumbbell T-pushup: Grab a pair of dumbbells from the FITBENCH FLEX (medium/light
weight). Hold dumbbells in hands and get in a plank position. Lower body to the floor, as you
push yourself back up, rotate the right side of your body upward and raise your right arm so it is
straight above your shoulder. Engage your core (your body should look like a “T”). Lower the
dumbbell back down to plank position and repeat, but on the left side.
6) Dumbbell pushup with row: Grab a pair of dumbbells from the FITBENCH FLEX
(medium/light weight). Hold dumbbells in hands and get into a plank position. Do a pushup - as
you raise yourself up, row the dumbbell on your right side, raising the dumbbell to your chest.
Pause, then lower the dumbbell back down and repeat the same movement with your left arm.
7) Dumbbell flat FITBENCH FLEX press: Grab a pair of dumbbells from the FITBENCH FLEX
(medium/heavy weight). Lie flat on your back on the FITBENCH FLEX, folding the dumbbells
over your chest so they are nearly touching. Your palms should be facing towards your knees.
Lower the dumbbells to your armpits. Pause, then press the weights back up to the start
position with a steady pace.
• Increased Difficulty: Try alternating the dumbbell press up. Instead of pressing
both dumbbells up at once, lift one at a time in an alternating fashion. This will
force your body to engage your core to keep balance. You can also try this
exercise with a neutral grip on the dumbbell – which instead of facing palms
toward knees, face palms toward each other and perform the same alternating
exercise.
8) Incline dumbbell FITBENCH FLEX press: Raise the FITBENCH FLEX top up to 45-
degrees (choose slot position 1, 2, or 3 – the higher you go, the more difficult). Grab a pair of
dumbbells (medium/heavy weight). Lie on your back with your feet on the ground slightly wider
than shoulder-width. Engage your quadriceps and your core to lock your body to the top of the
FITBENCH FLEX. Press dumbbells in the up position with your palms facing toward your knees
and dumbbells above shoulders. Lower the dumbbells slowly to your chest, pause, then press
the weights back up to the starting position.
• Increased difficulty: Try alternating the dumbbells press up (same as above).
Press your right hand up and return to staring, then press your left. Alternating up
and down. NOTE: The steeper the incline on the bench, the more difficult it will be.

!
!
!
FITBENCH LLC | 925 N Genesee Street, Unit 108350, Delafield, WI 53018 FITBENCH
FITBENCH.COM
US and International Patent Pending
© 2018 FITBENCH FLEX, LLC All Rights Reserved
18
!
You will engage your core and legs more the steeper it is, as well as activate
different muscle groups in the chest and shoulders. Try all of these variations at
different angles of the bench.
9) Incline FITBENCH FLEX dumbbell chest fly: Raise the FITBENCH FLEX top up to 45-
degrees (choose slot position 1, 2, or 3 – the higher you go, the more difficult). Grab a pair of
dumbbells (medium/heavy weight). Lie on your back with your feet on the ground slightly wider
than shoulder-width. Engage your quadriceps and your core to lock your body to the top of the
FITBENCH FLEX. Press dumbbells in the up position with your palms facing toward each other
and dumbbells above shoulders. Instead of lowering dumbbells to your chest, lower the
dumbbells with a slight bend in your elbow and pull your arms apart until your dumbbells are
shoulder height. Pause, then raise the dumbbells back to the starting position (pretend you are
hugging a tree when going back to the starting position).
10) Kettlebell FITBENCH FLEX pullover: Grab a kettlebell (light or heavy). With a flat top on
the FITBENCH FLEX, lay on the FITBNECH with your body perpendicular to the FITBENCH
FLEX with just your shoulders/upper back on the top, with your knees at a 90-degree angle and
your feet on the floor. (note that only your shoulders and upper back will be on the bench top)
Hold the kettlebell with both hands on the handle. Press the kettlebell up so it is above your
shoulders with arms straight. Lower the kettlebell by bending arms at the elbows and lower until
your hands are at the crown of your head. Pause, then press back to starting position with a
slight bend in your elbows.
11) Slam ball over-head slam: Grab the slam ball from the FITBENCH FLEX. From a
standing position with feet at shoulder width, raise the slam ball above your head and slam the
ball down onto the floor with a fierce throw. Remember to engage your core and bend at the
knees to get as much velocity on the slam ball as possible. Grab the ball, raise it to the starting
position, and repeat.
12) Standing resistance band press up: Grab one of the resistance bands and attach it to
one of the anchor points on the slam ball side of the FITBENCH FLEX. Stand a few feet away
with your back facing the FITBENCH FLEX. Grabbing the resistance band by the handles,
press the band up and out. Pause, then return to the starting position and repeat.
Arm Exercises
Biceps
1) Standing bicep curl: Grab a pair of dumbbells from the FITBENCH FLEX (medium/light
weight). While standing with core engaged and feet shoulder-width apart, let dumbbells hang at
arm’s length next to your sides, with palms facing forward. Without moving your upper arms,
bend your elbows, and curl the dumbbells, keeping them close to your shoulders. Pause, then

!
!
!
FITBENCH LLC | 925 N Genesee Street, Unit 108350, Delafield, WI 53018 FITBENCH
FITBENCH.COM
US and International Patent Pending
© 2018 FITBENCH FLEX, LLC All Rights Reserved
19
!
slowly lower the dumbbells back to the starting position. Remember your arms should be
straight at the starting position.
• Increased difficulty: Do the same exercise but perform a FITBENCH FLEX wall
sit at the same time: Raise FITBENCH FLEX top to the very top position (nearly
90-degrees). Rest back on the top and lower your body until your knees are at a
90-degree angle and hamstrings are parallel with the floor. Engage your core and
quadriceps and perform the same dumbbell curl exercise, holding this position
until all of the reps are completed for this exercise.
NOTE: All curl exercises can be done with varying grips. Standard-grip is palms
facing forward, neutral-grip is your palms facing each other, and reverse-grip is your
palms facing behind you. Each grip targets a different muscle grouping in your
forearms, biceps, and shoulders.
2) Incline FITBENCH FLEX hammer curl: Adjust the FITBENCH FLEX top to a 45-degree
incline. Grab a set of dumbbells (light/medium weight). Standing at the lower end of the top,
lower your entire body with your upper thighs, hips, stomach, and chest lying on the top.
Position your body to where your chest is just cresting the upper edge on the top. (Note – your
entire body from your heels to your neck should be at that same 45-degree angle.) Let your
arms with dumbbells in hands (palms facing in) hang in front of your body. Curl the dumbbell up
while not moving your upper arms. Pause, and lower weights slowly to the starting position.
3) Seated reverse dumbbell curl: With the FITBENCH FLEX in the flat position, grab two
(medium/light weight) dumbbells. Sit on the top with good posture with dumbbells hanging down
at sides, palms facing backwards. Bend at the elbow and curl the dumbbells up while not
moving your upper arms. (remember to keep palms facing the same direction the entire curl).
Pause, then slowly lower dumbbells to starting position.
• Increased difficulty: Try curling the dumbbells in both standard and reverse-grip.
Do a standard curl, and when you reach the top of the curl, reverse your grip, and
lower the dumbbell to the starting position. Continue to curl the weight with
reverse-grip, then switch again at the top, going back to a standard grip. Repeat.
(Remember to go slow with good form.)
4) Standing isolated curl: Adjust FITBENCH FLEX top to 45-degrees. Grab a dumbbell
(medium/light weight) with your right hand and stand behind the inclined FITBENCH FLEX top.
Rest your elbow and back of your arm on the FITBENCH FLEX top. Lower the dumbbell until
your arm is bent at about 20 degrees. Pause, then raise dumbbell back up to shoulder. Do
several times and repeat on the left side.

!
!
!
FITBENCH LLC | 925 N Genesee Street, Unit 108350, Delafield, WI 53018 FITBENCH
FITBENCH.COM
US and International Patent Pending
© 2018 FITBENCH FLEX, LLC All Rights Reserved
20
!
• Increased difficulty: Try doing the same exercise, but add a static hold when
your arm is extended. Hold in the down position for 30 seconds, do several reps
of this, and then switch arms.
5) Resistance band alternating burnout curl: Grab a resistance band from storage under the
FITBENCH FLEX and fix it to one of the anchor points (light/ medium resistance). While
standing with feet shoulder-width apart, grab the handles and hold palms facing forward. Step
back from the FITBENCH FLEX a few feet with arms hanging down. Curl your right arm and
lower and then left arm and lower in a fluid motion. Repeat this until fatigue in biceps sets in.
Triceps
1) Dumbbell or kettlebell lying triceps extension: Grab a pair of dumbbells or a kettlebell
(medium/light weight) and lie flat on the FITBENCH FLEX. Hold the weight over your head with
straight arms that are slightly angled back, with your palms facing each other (try to keep
elbows in). Without moving your upper arms, bend your elbows to lower the dumbbells or
kettlebell until your forearms are slightly beyond parallel to the floor. Pause, then lift the weights
back to the starting position.
NOTE: This exercise can be done standing or seated.
2) FITBENCH FLEX dip: With a flat top on the FITBENCH FLEX, sit on the long side of the top
with fingers holding the edge, facing your knees. Feet should be slightly wider than shoulder-
width apart with hamstrings parallel to the floor. Lower butt down until upper arm is parallel with
the floor. Pause, and then press back up until arms are straight. Make sure you keep your
elbows in and your core engaged.
• Increased difficulty: Try adding weight by placing a dumbbell or slam ball in your
lap and performing the same exercises. You can also isolate one leg by lifting one
leg straight out, parallel to the ground. Do several reps, then switch.
3) Dumbbell kickback: Grab a dumbbell (light/medium weight). With the FITBENCH FLEX flat,
place your left hand and left knee on the top. Your lower back should be naturally arched and
your torso parallel to the floor. Hold your right upper arm so that your bicep is parallel to the
floor with your elbow bent. Without moving your upper arm, raise the dumbbell until your arm is
completely straight. Lower your weight slowly back to the start position and repeat.
4) Overhead triceps extension with resistance band: Grab a resistance band from under the
FITBENCH FLEX top (medium/light weight). Fix the resistance band to one of the higher anchor
points on the slam ball side of the FITBENCH FLEX. From a few feet away, get into a split
lunge stance, with right knee and left toe on the ground. With a handle in each palm, extend
arms straight over