FitDesk 2050 User manual

IMPORTANT: READ THE OWNER’S MANUAL BEFORE ASSEMBLING
1161 SOUTH PARK DRIVE, KERNERSVILLE NC 27284
DISTRIBUTED BY FD PRODUCTS LLC.
VISIT OUR WEBSITE: WWW.THEFITDESK.COM
OR CALL US AT 1-336-423-5029 MONDAY - FRIDAY 9 A.M. - 5 P.M. EST
Owner’s Manual
Sit-To-Stand Desk
Model: 2050
Recommended
Max Load: 25 lbs. (11.3 kgs.)

TABLE OF CONTENTS
Introduction............................................................1
Safety Warnings / Maintenance.............................2 Operational Instructions........................................7
Customer Support..................................................3 Warranty...............................................................8
Tools / Hardware / Parts........................................4
Recommended Max Load: 25 lbs. (11.3 kgs.)
Weight of Sit Stand Desk: 48.1 lbs.
Foot Print Size
30.7” Wide x 22.8” Deep x Min. 29.4” / Max. 47.9” High
INTRODUCTION
Congratulations on taking a STAND for
your well-being by purchasing a FitDesk®
Sit-to-Stand Desk!
We know that your chair will still be a part
of your day, but we are confident that your
new Sit-to-Stand Desk will give you a
healthy alternative to inactive sitting.
Please check out some of our other
health and productivity products @
www.thefitdesk.com
1
580 mm
22.8” in.
780 mm
30.7” in.
MIN:
MAX:
747 mm
29.4” in.
1217 mm
47.9” in.
Assembly..............................................................5

SAFETY WARNINGS - URGENT PLEASE READ THIS SECTION
WE WANT YOU TO SAFELY USE THIS PRODUCT
NOTE: This equipment is suitable for home, school and office use only. Do not use in commercial or
rental settings.This item was not intended or designed for use in commercial or public places.
2
MAINTENANCE
The integrity of the FitDesk® Sit-To-Stand Desk can only be maintained when it is regularly
inspected for damage and wear. Special attention should be given to the following.
HARDWARE: Verify that all bolts are present and properly tightened.
TIP: Inspect Allen Bolts from time to time. NOTE: Do not overtighten Allen Bolts.
LUBRICATION: Periodically add lubrication for smooth operation.
WARNING! This height adjustable desk is designed for use in dry work areas only. The desk height is adjustable so
that it can be positioned at the most ergonomically suitable height. Any other use is at user’s risk.
1. Read the entire manual before assembling and using this equipment. Safe use can only be achieved if the
equipment is assembled, maintained and used properly. All users of the equipment must be informed of all warnings
and precautions.
2. CAUTION! Do not exceed the Maximum Listed Weight Capacity of 25 lbs. (11.3 kgs).
Serious Injury or Property Damage may occur.
3. WARNING! Make sure no obstacles are in the desk’s path. Make sure the desktop is not touching any walls.
Make sure all cords are appropriate length to accommodate the change in height.
4. Do not sit or stand on the desk frame. Do not crawl or lie under the desk frame.
5. Do not place any objects taller than 20” underneath the desk.
6. Do not attempt to raise or lower the desk with any item on the desk. Remove all items before raising or lowering.
7. Do not attempt to move the desk with any items on the desk. Remove all items before moving the desk.
8. Do not use for holding televisions or microwave ovens.
9. Keep young children and pets away from equipment.
10. Inspect and tighten all parts often. Replace any worn parts immediately. Do not use the equipment until the
problem has been resolved.
11. If you find any defective components while assembling or checking the equipment, stop immediately.

3
NEED HELP?
CONTACT US FIRST
1-336- 423-5029
CUSTOMER SERVICE QUESTIONS
WWW.THEFITDESK.COM
FOR FASTEST POSSIBLE SERVICE PLEASE HAVE AVAILABLE
Model # (refer to this manual) - Serial # (located on Where is this located?)
[email protected]
Step 1: www.thefitdesk.com
Step 2: “Support”
Step 3: “Submit A Support Ticket”
EASY TO USE CUSTOMER TICKETING
MONDAY - FRIDAY 9 A.M. - 5 P.M. EST

NOTE: If Parts or hardware are missing contact customer service immediately.
HARDWARE
PARTS
TOOLS
Each FitDesk®Sit To Stand Desk comes equiped with two Allen Wrenches (AA) (BB).
DD. (4) M6 x 30 Allen Bolt CC. (2) M6 x 12 Allen Bolt
A. (1) Desktop
B. (1) Base
C. (1) Post
D. (1) Basket
E. (1) Cable Management Box
EE. (4) M8 x 20 Allen Bolt
4
AA
AA
AA. (1) 4mm Allen Wrench BB
BB
BB. (1) 5mm Allen Wrench
CC
A B
D E
C
EE
DD
Note: Hardware and Tools not shown to actual size.
Estimated Assembly Time : 10 minutes

ASSEMBLY
5
Step 1: Attach the Base (B) and
the Post (C) by using the supplied
5 mm Allen Wrench (BB) to tighten
the M8 x 20 Allen Bolts (EE).
Figure 1
Step 2: Attach the Desktop (A) and the Post (C) by
using the supplied 4 mm Allen Wrench (AA) to
tighten the M6 x 30 Allen Bolts (DD).
Figure 2
NOTE: Before assemblyplease check all parts carefully.
FIGURE 1
FIGURE 2
Note: Do not overtighten Allen Bolts.
C
B
BB EE
B
C
C
A
AA
DD
DD
DD
DD
AA

ASSEMBLY
6
Step 3: While the Desktop (A) is still
upside down, slide the plastic ring
down, insert into place. Figure 3
Step 4: Using two M6 x 12 Allen Screws (CC) and
the 4 mm Allen Wrench (AA) fasten the Basket (D)
to the underside of the Desktop (A). Figure 4
Step 5: Insert the Cable Management Box (E) into the Desktop (A).
Figure 5
Your FitDesk®Model 2050 Sit To Stand Desk is now ready to use.
FIGURE 4
FIGURE 5
A
A
A
A
E
D
FIGURE 3
AA
CC
CC

OPERATIONAL INSTRUCTIONS
7
NOTE: Before operating please read carefully
HEIGHT ADJUSTMENT
Step 1: To adjust the height of the Desktop (A) push handle up and hold.
Step 2: Using both hands push down on the Desktop (A) to a desired height. Figure 2
Step 3:Using the same motion lift up the Desktop (A). Figure 3
FIGURE 1
FIGURE 2 FIGURE 3
FIGURE 3
AA
AA
A

WARRANTY
8
This limited warranty is applicable to each original end-customer (hereinafter “Customer”) purchasing the FitDesk®
Model: 2050 Sit-To-Stand Desk consisting of the structural metal frame (hereinafter the “Structural Frame”) and
various other non-frame components (hereinafter the “Non-Frame Parts”) sold by FD Products, LLC (hereinafter
“Company”) for Customer’s own use and not for resale. The Structural Frame and Non-Frame Parts are collectively
referred to herein as the “Products”.
1. LIMITED WARRANTY; EXCLUSIVE REMEDIES:
1.1. LIMITED WARRANTY ON PRODUCTS: Company warrants solely to the original Customer that (a) the
Structural Frame will be free from defects in materials and workmanship under normal use for a period of Five (5)
YEARS from the date of original retail purchase, and (b) the Non-Frame Parts, will be free from defects in materials
and workmanship under normal use for a period of Five (5) YEARS from the date of original retail purchase. Notwith-
standing the foregoing, the colors and finishes of the Products may vary within a reasonable scope due to unavoid-
able color variations in different production batches, and such variations shall not constitute a material defect. This
limited warranty is limited solely to the original Customer with proof of purchase and is not transferable.
1.2. THE WARRANTY: During a covered Product’s limited warranty period, Company will, at Company’s sole
option and discretion, (1) repair the defective component or product without charge or (2) replace the defective
component or product without charge.
1.3. The foregoing limited warranty is subject to the Customer’s proper storage, transportation, handling and use
of the Products as the same are defined within Company’s then-current published guides and instructions for use
and care. The limited warranty does not include defects due to normal wear and tear, abuse or misuse, mishandling,
neglect, accident, fire, lightning, sunlight or other natural hazard, delivery or transportation damage, failure to follow
applicable directions or instructions, or improper or inadequate cleaning, maintenance, care, repairs, modifications,
or use beyond a Product’s intended use.
1.4. LIMITED WARRANTY CLAIMS PROCEDURE: To obtain performance under this limited warranty, Customer
shall notify Company in writing (to FD Products, LLC, 1161 South Part Drive, Kernersville, NC 27284, Attn: Customer
Service / Warranty Department), by email (to [email protected]), or by telephone (to [phone])
with a full description of the defect that is covered by warranty and a copy of the dated proof of purchase of the
applicable product.
• Company shall review each such claim and issue Customer a return merchandise authorization (“RMA”) in
the event that the described defect or condition merits warranty review as determined by Company. Customers who
have been issued a RMA shall, at Company’s election, return the covered item to the same physical address listed
above for reporting initial claims. Company shall not accept any returned product without a RMA.
• Upon receipt, Company will evaluate the returned product(s) to determine if there is a warranty claim and, if
so, how Company wishes to remedy the same. During a covered product’s respective limited warranty period,
Company will, at Company’s sole and absolute option and discretion, (1) repair the defective component or product
without charge or (2) replace the defective component or product without charge. Refunds are not available
pursuant to this limited warranty.
• Customer is solely responsible for transportation of the covered product(s) to the Company for evaluation
(if applicable and requested by Company). In the event that Company determines that a claim under this limited
warranty is justified, Company shall be responsible for transportation of the repaired, corrected, replaced or
exchanged product back to Customer. Customer shall be solely responsible for the transportation of any product
back to Customer if Company determines that a claim under this warranty is not justified.
• Any repaired, corrected, replaced or exchanged Products shall be subject to the Limited Warranty set forth to
the duration of the original limited warranty period as set forth in Section 1.1. and not for any extended duration,
following their repair, correction, replacement or exchange.

WARRANTY
9
1.1. IF A COMPANY PRODUCT DOES NOT CONFORM TO THESE LIMITED WARRANTIES, THE PURCHASER’S
SOLE AND EXCLUSIVE REMEDY IS, AT COMPANY’S SOLE AND EXCLUSIVE OPTION, THE (1) REPAIR OF ANY
DEFECTIVE PRODUCT OR COMPONENT PART OR (2) REPLACEMENT OF ANY DEFECTIVE PRODUCT OR
COMPONENT PART. THE LIMITED WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND MADE IN
LIEU OF ALL OTHER WARRANTIES, REMEDIES, RIGHTS OR CONDITIONS, WHETHER ORAL OR WRITTEN,
EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. COMPANY
SPECIFICALLY DISCLAIMS, WITHOUT LIMITATION, ANY AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, OF
ANY KIND. IF COMPANY CANNOT LAWFULLY DISCLAIM IMPLIED WARRANTIES UNDER THIS LIMITED WARRANTY,
ALL SUCH WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THIS LIMITED WARRANTY. The
Company does not assume or authorize any person to assume for them any other liability in connection with the
Products.
2. EXCLUSION AND LIMITATION OF LIABILITY:
IN NO EVENT, WHETHER BASED ON CONTRACT OR TORT OR OTHER LEGAL THEORY, SHALL COMPANY BE
LIABLE FOR ANY INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT
NOT LIMITED TO, DAMAGES TO OTHER PROPERTY, INCONVENIENCE, DAMAGES FOR LOSS OF PROFITS,
REVENUE, GOODWILL OR USE, INCURRED BY CUSTOMER OR ANY THIRD PARTY, WHETHER IN AN ACTION IN
CONTRACT, TORT, STRICT LIABILITY, OR IMPOSED BY STATUTE, OR OTHERWISE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. Some states do not allow the exclusion or limitation of incidental or consequen-
tial damages or exclusions or limitations on the duration of implied warranties or conditions, so the above limitations
or exclusions may not apply to Customer. In jurisdictions that limit the scope of or preclude limitations or exclusion
of remedies or damages, or of liability, such as liability for gross negligence or willful misconduct or do not allow
implied warranties to be excluded, the limitation or exclusion of warranties, remedies, damages or liability set forth
above are intended to apply to the maximum extent permitted by applicable law. This limited warranty gives the
Customer specific legal rights, and the Customer may also have other rights that vary by state, country or other
jurisdiction.
3. SEVERABILITY:
If any provision of this limited warranty is held to be illegal, invalid or otherwise unenforceable, such provision will
be enforced to the extent possible consistent with its stated intention, or, if incapable of such enforcement, will be
deemed to be severed and deleted from this limited warranty, while the remainder of the terms of this limited
warranty will continue in full force and effect.
4. DISPUTE RESOLUTION:
This FitDesk Limited Warranty shall be governed by and construed in accordance with the laws of the State of North
Carolina, without regard to its principles of conflicts of law. The parties acknowledge the exclusive jurisdiction of the
federal and state courts of the State of North Carolina. Any claims or disputes under this FitDesk Limited Warranty
shall be heard exclusively in any state or federal courts sitting in Guilford County, North Carolina, and both parties
expressly consent to the personal jurisdiction and venue of the North Carolina state and federal courts for such
actions.

FitDesk®is a registered trademark of FD Products LLC. - All Rights Reserved 2016
Updated 12/5/2016
facebook.com / Fitdesk