FitLinxx Pebble Installation and operation manual

Product Information Guide
Pebble®

2
This guide covers the following information:
1. Pebble Display
2. Wearing Your Pebble
3. Pebble Battery
4. Syncing Pebble Data
5. Using Your Personal SyncPoint

3
Pebble Display
To show daily
progress anytime
Activity status Sync status
Quickly tap the Pebble 5 times
with the pads of your ngers
Minimal progress
toward your goal
50% of your
goal achieved
Pulsing = at least
5 minutes of data stored
Solid = recent
successful data sync
Sequence of lights

4
Wearing Your Pebble
All-day activity and walking Running, elliptical, and indoor biking
For good accuracy -
clip the Pebble on your belt,
waistband, pocket or bra
For best accuracy -
clip the Pebble at on
the top of your shoes
Note: Pebble must be secure

5
CR 2032
+
Pebble Battery
Replacing the battery
Pebble includes CR2032 battery
A spare battery is included
for convenience
Turn the clip
counterclockwise
Insert new
battery under tab
Replace
battery door
Turn clockwise
Remove the
battery door
Use tool or device clip to
remove the old battery
Wait 60 seconds
Red lights = less than 2 weeks
of battery life remaining
1.
4.
2.
5.
3.
CR 2032
+
CR 2032
+
CR 2032
+
CR 2032
+

6
Syncing Pebble Data
The Pebble will sync data with your website when it is “awake”
and near a wireless SyncPoint
Quickly tap the Pebble 5 times with the
pads of your ngers near a SyncPoint
Walk near a SyncPoint
OR
To wake the Pebble and sync activity data

7
Using Your Personal SyncPoint
Insert Personal
SyncPoint
Download and
install software
Personal
SyncPoint status
Working
properly
Not working
properly
1.
3.
2.
100%

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference and (2) this device must accept any interference received, including interference that may cause undesired operations. Changes or
modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the devices.
Industry Canada Notice to users: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d‘Industrie Canada applicables aux appareils radio exempts de licence. L‘exploitation est autorisée aux deux
conditions suivantes: (1) l‘appareil ne doit pas produire de brouillage, et (2) l‘utilisateur de l‘appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d‘en compromettre le fonctionnement.
European Wireless EU Declaration of Conformity: This wireless device complies with the specications EN 300 440-2, EN 301-489, and EN 60950
following the provisions of the R&TTE Directive.
Patent information can be found at http://www.tlinxx.net/patents.htm. Specications subject to change without notice.
Warning: Risk of explosion if battery is replaced by an incorrect type. Please dispose of used batteries in accordance with your local environmental
laws and guidelines.
© 2013 FitLinxx. All rights reserved. FitLinxx, the Fitlinxx logo, and Pebble are trademarks of FitLinxx, Inc.
v2.2a
For more information regarding use, care, or servicing, please contact:
Use of this product is subject to the FitLinxx End User License Agreement (EULA): http://www.tlinxx.net/terms.htm