Fitness Reality X-Class 310 User manual

IMPORTANT: Read instructions carefully before using this product.
Retain this owner’s manual for future reference.
The specifications of this product may vary from this photo, subject to
change without notice.
310 X-Class Smart Technology Upright
Bike with Goal Setting Workout Programs
2140.1-072117

PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.
STOP. Contact customer service if you have any questions
regarding assembly or proper operation of the machine.
Email us at:
[e-mail]
Or call us at:
1-844-641-7920
Hours:
8:00 am to 5:00 pm (PST) Daily

1
TABLE OF CONTENT
SERVICE ------------------------------------------------------------------------ 2
LABEL PLACEMENT --------------------------------------------------------- 3
IMPORTANT SAFETY GUIDELINES ------------------------------------- 4
OVERVIEW DRAWING ---------------------------------------------------- 6
PARTS LIST --------------------------------------------------------------------- 7
HARDWARE & TOOL LIST ----------------------------------------------- 9
ASSEMBLY -------------------------------------------------------------------- 10
COMPUTER CONSOLE --------------------------------------------------- 18
ADJUSTMENTS --------------------------------------------------------------- 22
TROUBLESHOOTING ------------------------------------------------------- 23
TRANSPORTATION & STORAGE --------------------------------------- 25
WARRANTY -------------------------------------------------------------------- 26
PARTS REQUEST FORM--------------------------------------------------- 27

2
SERVICE
IMPORTANT: FOR NORTH AMERICA ONLY
For damaged or defective product, questions, replacement parts or any other service
support, please contact our customer service department by the below methods:
For The Best Service, please Email:
[e-mail]
Response Time: 1-2 Business Days
Emailing us with the information above will be the best method to receive a response during
peak business hours
Website:
www.paradigmhw.com
Toll-Free:
1-844-641-7920
(8:00 AM - 5:00 PM Pacific Standard Time, Daily)
Response time may vary via calling
Please have the following information ready when requesting for service:
•Your name
•Phone number
•Model number
•Serial number
•Part number
•Proof of Purchase
For damaged or defective product please contact our customer service before returning to
the store.
Paradigm Health & Wellness, Inc.
1189 Jellick Ave.
City of Industry, CA 91748, USA

3
LABEL PLACEMENT

4
IMPORTANT SAFETY GUIDELINES
Read all instructions before using the equipment. When using the equipment, basic
precautions should always be followed. WARNING - To reduce the risk of injury to
persons, read and under the following:
1. Make sure your equipment is correctly assembled before you use it.
2. Be sure all screws, nuts, and bolts are tightened prior to use.
3. Before using this equipment, we recommend doing warm ups and stretching of the major muscle
groups.
4. Only one person should be using the equipment at a time.
5. Never operate this Equipment if it is damaged, if it is not working properly, has been dropped, or
damaged. If a problem is encountered contact Customer Service before using the equipment again.
6. Always use this equipment on a clear and level surface.
7. For household use only.
8. Do not use outdoors or near water.
9. Use this product only for its intended use as described in this manual. Do not use attachments not
recommended by the manufacturer.
10.Do not wear loose clothing when using the equipment.
11.Never drop or insert any object into any opening.
12.If at any time you feel faint, light-headed, or dizziness while operating the equipment, stop exercising
immediately. You should also stop exercising if you are experiencing pain or any discomfort.
13.For any problems contact customer service. Servicing should be performed by an authorized service
representative. Our contact number is on the service page.
14.DO NOT pedal in reverse.
15.This product requires a minimum of 6 square feet of space for safe operation.
16.ASSEMBLY ALL HARDWARE IN THE ORDER THAT IS SHOWN IN THE ILLUSTRATIONS
17.Warning: - Risk of Personal Injury - Consult with your personal physician to see if this exercise
equipment is appropriate for you. This is especially important for people with pre-existing health
problems. Do not use this equipment without your physician's approval.
18.Warning: - Risk of Personal Injury – Do not allow children to use this machine.
19.Warning: - Risk of Personal Injury - Keep children under the age of 13 away from the machine.
20.Warning: - Risk of Personal Injury – Keep body parts, hair, loose clothing, and jewelry
clear of all moving parts.
21.Warning: - Risk of Personal Injury - Do not attempt to service the unit yourself. Discontinue
use and contact customer service.
22.Warning: - To Reduce The Risk Of Personal Injury - Read And Understand All Read The
Instructions Before Using the Bike.

5
IMPORTANT SAFETY GUIDELINES
Do not use this equipment if you have any of the following conditions or ailments:
•Pregnancy
•Extreme obesity
•Middle ear infection
•Hiatus hernia or Ventral hernia
•Glaucoma, retinal detachment or conjunctivitis
•Use of anticoagulants including Aspirin in high doses.
•Spinal injury, Cerebral Sclerosis, or acutely swollen joints
•Heart or circulatory disorders for which you are being treated
•High blood pressure, Hypertension, Recent stroke or Transient Ischemic attack
•Bone weaknesses including Osteoporosis, Unhealed fractures, Modular pins, or surgically implanted
orthopedic supports.
Do not exceed the maximum rated weight (load):
The Maximum Weight Capacity for this product is 300lbs/136kgs.
Retain this owner’s manual and keep the original purchase receipt
for future reference.
WARNING: Before connecting any cables, make sure the Metal
Prongs of the cables are OKAY.
SAVE THESE GUIDELINES
Correct
Incorrect

6
OVERVIEW DRAWING

7
PARTS LIST
No.
Description
Qty
No.
Description
Qty
1
Main Frame
1
30
Carriage Bolt M8*75 L25
4
2
Front Post
1
31
Curve Washer Ф8*Ф20*2.0
4
3
Handlebar
1
32
Cap Nut M8 S14
4
4
Seat Post
1
33
Adjustable Pad M10*30
2
5
Seat Adjustment Bracket
1
34
Power Supply Cable
1
6
Front Stabilizer
1
35
Adaptor
1
7
Rear Stabilizer
1
36
Thin Hex Nut 1/2" S15
1
8
Console
1
37
Hex Nut M10*B5
2
9
Phillips Screw M5*10
4
38
Stabilizer End Cap
2
10
Hand Pulse Extension Wire
2
39
Motor Wire
1
11
Console Extension Wire
1
40
Magnet Wheel Ф250*40*Ф32 Single
Direction
1
12
Hand Pulse Sensor L=350MM
2
41
Flange Nut M10*1.0*6
2
13
Hex Bolt M8*15
4
42
Eye Bolt M6*36
2
14
Spring Washer d8
16
43
U-Bracket 31*30*δ1.0
2
15
Flat Washer φ16*φ8*1.5
9
44
Spring Washer Ф6
2
16
Handlebar Upper Cover
1
45
Hex Nut M6
2
17
Handlebar Lower Cover
1
46
Motor
1
18
Self-Tapping Phillips Screw ST2.9*16
8
47
Self-Tapping Phillips Screw ST4.2*15
4
19
Left Front Post Cover
1
48
Speed Sensor
1
20
Right Front Post Cover
1
49
Self-Tapping Phillips Screw ST2.9*12
1
21
Main Frame Wire
1
50
Crank Cover
2
22
Curve Washer Ф8*Ф16*1
3
51
Flange Nut M10*1.25
2
23
Round Knob M16*1.5
1
52
Left Crank 6"
1
24
Left Pedal
1
53
Right Crank 6"
1
25
Left Pedal Strap
1
54
Crank Cover Φ60*Φ25*10
2
26
Right Pedal
1
55
Protective Cover Φ215*14
2
27
Right Pedal Strap
1
56
Left Cover
1
28
Knob M16*1.5
1
57
Right Cover
1
29
Seat
1
58
Self-Tapping Phillips Screw ST4.2*20
10

8
PARTS LIST
No.
Description
Qty
No.
Description
Qty
59
Self-Tapping Phillips Screw ST4.2*25
5
75
Lock Nut M8
1
60
Bearing Cup Φ17*1.0
2
76
Bushing
1
61
Waved Washer Φ17*Φ21*0.3
1
77
Seat Post Protective Cover
1
62
Bearing 6003-2Z
2
78
Square End Cap
2
63
Belt Pulley
1
79
Hex Bolt M8*15
1
64
Belt 440J
1
80
Stopper Ф18*18
1
65
Phillips Screw M6*15
4
81
Hex Socket Screw M6*8
1
66
Spring Washer Ф6
4
82
Self-Tapping Phillips Screw ST4.2*20
4
67
Lock Nut M6
4
83
Foam Grip φ27*φ33*550
2
68
Plastic Hex Bolt Φ8*32
3
84
Handlebar End Cap
2
69
Idle Arm
1
85
Round End Cap
1
70
Idle Wheel Ф10*Ф35
1
86
Front Stabilizer End Cap
2
71
Flat Washer Ф6*Ф12*1.0
1
87
Upper Hand Pulse Wire
2
72
Phillips Screw M6*10
1
88
Console Wire
1
73
Spring Ф17*Ф2*62
1
89
Hex Bolt M8*20
7
74
Flat Hex Bolt M8*20
1

9
HARDWARE & TOOL LIST

10
ASSEMBLY
Remove the Metal Tubes (B) from the Main Frame (1) by using 6mm Allen Wrench provided.
Discard the metal tubes and any hardware that was attached at this point as they will not be used in
the actual assembly.
6mm Allen Wrench 1PC
Tools:
1

11
ASSEMBLY
Step 1
1a. Front Stabilizer Installation – Lift up the front of the Main Frame (1), and attach the Front
Stabilizer (6) onto the front curve of the Main Frame (1) with two Carriage Bolts (30), two Curve
Washers (31), two Spring Washers (14), and two Cap Nuts (32). Use the Multi Hex Tool with
Phillips Screwdriver to tighten the Cap Nuts (32) until they are firm and secure.
1b. Attach the Adjustable Pad (33) onto the Rear Stabilizer (7) as shown in Fig. A.
1c. Rear Stabilizer Installation – Lift up the rear of the Main Frame (1), and attach the Rear
Stabilizer (7) onto the rear curve of the Main Frame (1) with two Carriage Bolts (30), two Curve
Washers (31), two Spring Washers (14), and two Cap Nuts (32). Use the Multi Hex Tool with
Phillips Screwdriver to tighten the Cap Nuts (32) until they are firm and secure.
Hardware:
(30) Carriage Bolt
4 PCS
(31) Curve Washer
4PCS
(32) Cap Nut
4PCS
(14) Spring Washer
4PCS
Multi Hex Tool with Phillips
Screwdriver
1PC
Tool:
Fig. A

12
ASSEMBLY
Step 2
2a. Installing the Pedal Straps: Install the Left Pedal Strap (25) onto the Left Pedal (24) and the
Right Pedal Strap (27) onto the Right Pedal (26). See Fig. B.
2b. Installing the Left Pedal: Insert the threaded shaft of the Left Pedal (24) into the threaded
hole on the Left Crank (52). Turn the pedal shaft by hand in a counter-clockwise direction. Then
tighten with the Multi Hex Tool with Phillips Screwdriver provided.
2c. Installing the Right Pedal: Insert the threaded shaft of the Right Pedal (26) into the threaded
hole on the Right Crank (53). Turn the pedal shaft by hand in a clockwise direction. Then tighten
with the Multi Hex Tool with Phillips Screwdriver provided.
Multi Hex Tool with Phillips
Screwdriver
1PC
Tool:
Fig. B

13
ASSEMBLY
Step 3
3a. Installing the Seat Post: Attach the Knob (28) to the Seat Adjustment Bracket (5). Then
slide the Seat Post (4) into the Main Frame (1) and secure it using the Round Knob (23).
3b. Installing the Seat: Install the Seat (29) on to the Seat Adjustment Bracket (5) and secure it
using the Multi Hex Tool with Phillips Screwdriver provided.
Multi Hex Tool with Phillips
Screwdriver
1PC
Tool:

14
ASSEMBLY
MUST TIGHTEN IN SEQUENCE: A,B,C,D,E,F,G.
Step 4
4a. Removing the Hardware: Remove seven Hex Bolts (89), seven Spring Washers (14), four
Flat Washers (15) and three Curve Washers (22) from the Main Frame (1) using the 6mm Allen
Wrench provided.
4b. Connecting the Wires: Connect the Console Extension Wire (11) from the Front Post (2) to
the Main Frame Wire (21) from the Main Frame (1).
4c. Installing the Front Post: Slide the Front Post (2) onto the Main Frame (1). Align the holes of
the Front Post (2) and Main Frame (1). Secure the Front Post (2) to the Main Frame (1) with the
previously removed seven Hex Bolts (89), seven Spring Washers (14), four Flat Washers (15)
and three Curve Washers (22). Tighten the Hex Bolts (89) with the 6mm Allen Wrench provided.
4d. Installing the Front Post Cover: Secure the Left and Right Front Post Cover (19) & (20)
onto the Front Post (2) with three Self-Tapping Phillips Screw (18) and two Self-Tapping
Phillips Screws (58) using the Multi Hex Tool with Phillips Screwdriver provided.
Multi Hex Tool with Phillips
Screwdriver
1PC
6mm Allen Wrench 1PC
Tools:
Hardware Pack:
(18) Self-Tapping Phillips
Screw 3PCS
(58) Self-Tapping Phillips
Screw 2PCS

15
ASSEMBLY
Step 5
5a. Removing the Hardware: Remove four Hex Bolts (13), four Spring Washers (14) and four
Flat Washers (15) from the Handlebar (3) using the 6mm Allen Wrench provided.
5b. Connecting the Hand Pulse Wires: Connect the Hand Pulse Wire (12) from the Handlebar
(3) with the Hand Pulse Extension Wires (10) from the Front Post (2).
5c. Installing the Handlebar: Attach the Handlebar (3) onto the Front Post (2) with four Hex
Bolts (13), four Spring Washers (14) and four Flat Washers (15) using the 6mm Allen Wrench
provided. Thoroughly tighten the hardware once complete.
5d. Installing the Cover: Align the Handlebar Lower and Upper Cover (17) & (16) and secure
with four Self-Tapping Phillips Screws (18) using the Multi Hex Tool with Phillips Screwdriver
provided.
Multi Hex Tool with Phillips
Screwdriver
1PC
6mm Allen Wrench
1PC
Tools:
Hardware Pack:
(18) Self-Tapping Phillips
Screw 4PCS
Pre-Installed Hardware:
(13) Hex Bolts
4PCS
(14) Spring Washer
4PCS
(15) Flat Washers
4PCS

16
ASSEMBLY
Step 6
6a. Removing Hardware: Remove four Phillips Screws (9) from the back of the Console (8)
using the Multi Hex Tool with Phillips Screwdriver provided.
6b. Connecting the Wires: Connect the Hand Pulse Extension Wire (10) and Console
Extension Wire (11) from the Front Post (2) to the Upper Hand Pulse Wire (87) and Console
Wire (88) from the Console (8). See Fig. D.
6c. Installing the Console: Attach the Console (8) onto the Front Post (2). Tuck all the excess
wires into the tube of the Front Post (2). Place the Console (8) onto the bracket of the Front Post
(2) and secure it with the four Phillips Screws (9) previously removed. Then tighten with the Multi
Hex Tool with Phillips Screwdriver provided.
Multi Hex Tool with Phillips
Screwdriver
1PC
Tool:

17
ASSEMBLY
56
7a. Plugging in the Machine – Check the specifications on the Adaptor (35) before plugging into
an outlet. Connect the Adaptor (35) to the Power Supply Cable (34) on the rear of the Left Cover
(56). Then plug the Adaptor (35) into a wall outlet.

18
CONSOLE
COMPUTER CONSOLE
Button Functions
START：
1. Begin the desired exercise.
2. Resume exercise when paused.
STOP：
1. While exercising, Press to pause. Press once
more to terminate workout.
2. Hold for 3 seconds to reset the console.
RETURN:
1. Return to the previous screen.
UP ARROW：
1. While exercising, press to increase resistance.
2. In custom setting, press to increase resistance.
DOWN ARROW：
1. While exercising, press to decrease resistance.
2. In custom setting, press to decrease resistance.
OK：
1. Press to confirm the selection.
OK+STOP：
1. Press and hold for 3 seconds to enter Setup mode to change the language,
units of measurement.
UP+DOWN：
1. Turn on or off the LED Tablet Holder Light.