FJDynamics FJ-WF01 User manual

WIFI camera
Model: FJ-WF01
Brand name: FJDynamics
Manufacturer: FJ Dynamics Technology Co., Ltd Address: No.1, Dongfeng-Iseki Road
Xiangzhou International Logistic Park, Xiangyang, Hubei, China

一、list,
Jiangyu WIFI camera is a smart wireless camera launched by Fengjiang intelligent. This
product can satisfy the real-time monitoring of reversing situation and pear tool operation
monitoring, and greatly improve the safety and practicability of Jiangyu automatic driving
system.
二、the main components
1. Camera body
2.The power cord

三、Product specifications
model
FJ-WF01
Basic
parameters
Size
The main size is 88*102*128mm, and the
power cable is 7m
color
black
respectively
1080P
Protection grade
IP65
product weight
370g
Compression
standard
Video compression bit
rate
32Kbps~8Mbps
Audio compression
standard
G.711/G.722.1/G.726/MP2L2/AAC/PCM
Audio compression bit
rate
64Kbps(G7.11)/16Kbps （ G7.22.1 ） /16Kbps
(G7.26）
interface
Reset button
-
power interface
DC 母头（5.5*2.1*6.2）
function
Interface protocols
Support agreement
internal agreement
Common functions
Anti-blinking, dual-stream, and password
protection
WiFi
Transmission distance
50m
Transmission rate
11b:11Mbps 11g:54Mpbs 11n:150Mbps
Channel bandwidth
20MHZ

security
64/128-bitWEP,WPA/WPA2
Frequency range
2.4GHz~2.4835GHz
General
specification
power input
DC 12V，1A
Working temperature
-20℃ ~ 60℃
Storage temperature
-30℃ ~ 60℃
Maximum infrared
irradiation distance
10m
Working humidity
10～95%
四、Instructions for
1. WIFI camera is composed of camera body, camera bottom plate and power cable.
2.Glue the camera baseboard to the body with 3M glue, and fix the camera with screws on the
base.
3. One end of the power cable is directly connected to the 12V power supply of the vehicle,
4.Power on after the preparation, and hold down the Reset button to check whether the
camera can work normally. After the camera makes three consecutive clicks, the connection
preparation is complete.
五、WARNING
WARNING: This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) This
device must accept any interference received, including interference that may cause
undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment shall be installed and operated with minimum distance 20cm
between the radiator & body.
and the other end is directly connected to the camera.