FK SKS 3117D User manual
SKI & SNOWBOARD SERVICE TOOLS
www.FKTOOLS-US.COM
SKI & SNOWBOARD SERVICE TOOLS
88° or 89° SIDE EDGE or 1° BASE EDGE
88° or 89° SIDE EDGE or 1° BASE EDGE
Perfect for tuning or beveling edges on all skis
and snowboards. Easy to use at home, in the shop
or on the hill. Tune side edge 88° or 89° and base
edge 1°.
Comes with 70 mm Blue DMT Diamond.
Fits Medium coarse and ne les, sold separately.
VISITTHE FK/SKSTOOLS SITE
www.FKTOOLS-US.COM
RUFFOLO, INC. 2926 75TH ST. KENOSHA,WI 53143 800-877-7025
TOOLS MFG. IN GERMANY
0
96791 33117
1
3117D POCKET I BASE & EDGE BEVELER
3117D POCKET I BASE & EDGE BEVELER
3117D POCKET I BASE & EDGE BEVELER
3117D POCKET I BASE & EDGE BEVELER
Place le here to
tune side edges 88°
Place le
here to tune
base edges 1°
Turn tool over to
tune side edges 89°
w/DMT DIAMOND
w/DMT DIAMOND
w/DMT DIAMOND
w/DMT DIAMOND
3117_Dblister card.indd 13117 Dblister card indd 1 12/1/2010 12:01:16 PM12/1/2010 12:01:16 PM
Instructions for using the 3117D
Insert le into tool into the proper place for base
or side edge beveling. To tune the side edge to
the angle you desire place the tool on ski or snow-
board with the angle arrow pointing at the base.
It is usually best to pull the tool toward you.
Notice the arrow on the le and insert it so that
the le is inserted into tool with correct cutting
direction.
It is usually best to tune the base edge rst.
You want to just remove the scratches on the base
edge.
To produce a new sharp corner work the side edge
until enough material is removed to produce a
sharp corner.
The 3117 Pocket Tuner is designed to accept 70mm
les and stones including the DMT 70mm Diamond
Stones.
See Tuning tips online at
www.fktools-us.com/tooltips.asp
Replacement and optional les
3049 70mm Fine le
3200 70mm Medium le
3206 70mm Mill (Coarse) le
703G Green 1200 Grit DMT Diamond
703R Red 600 Grit DMT Diamond
703B Blue 325 Grit DMT Diamond
703K Black 220 Grit Diamond
703XX Silver 120 Grit Diamond
3212 70mm Tungsten Carbide le
3216 70mm Pro Tungsten Carbide le
3117 POCKET I BASE & EDGE BEVELER
Place le here to
tune side edges
Place le
here to tune
base edges
Notice arrow on le
File cuts in one
direction only.
The angle arrow that
points toward the base
indicates the angle for
side edge beveling.
This part of tool always
runs on base of ski or
snowboard. whether
you are tuning the base
or side edge.
Tighten set screws
to secure le.
3117_Dblister card.indd 23117 Dblister card indd 2 12/1/2010 12:01:23 PM12/1/2010 12:01:23 PM
