Flair Jasper CK 6285 User manual

PRODUCT SIZE : 920mm x 1930mm
Thank you for purchasing this product. Before starting assembly we suggest you spend a short time reading
through this leaflet, then follow the simple step by step guide.
Two persons are needed to assemble this product.
ASSEMBLY INSTRUCTIONS
MODEL : CK 6285
120
* Approximately 2 Hours
* 2 People Required
* WARNING : Top Bunks and elevated Beds are dangerous and are not recommended for children
under the age of 6.
The upper bunk must be more than 2 m from any ceiling fan.
IMPORTANT INFORMATION
1. This bunk bed is suitable for a single mattress or foam bed 920mm x 1870mm.Thickness of mattress should not exceed 200mm.
2. Children should be discouraged from playing on this bunk bed.
3. The bunk bed should be checked periodically by the owner to ensure that the guardrail, ladder and other components are
maintained in the correct position and state of repair and that all connectors are tight.
4. A bunk bed is not to be placed near a ceiling fan unless the distance between the closest points on the ceiling fan and bunk
bed is at least 2 metres.
5. Use guardrails on both sides of upper bunk.
6. Prohibit horseplay on or under bed(s).
7. Prohibit more than one person on upper bunk.
8. Use ladder for entering and leaving upper bunk.
9. If the bunk bed will be placed next to the wall, the guardrail that runs the full length of the bed should be placed against the wall to
prevent entrapment between the bed and the wall.
10. Fall from elevated beds can be fatal and death have occurred where children have fallen from elevated beds. This is
relevant for all ages.The risk is greater for younger children.
The risk of injury or death from a fall from an elevated bed compared to a non elevated bed is :
10 x greater for 7-8 year olds
7 x greater for 9-10 year olds
3 x greater for 11-12 year olds
11.Top Bunks and elevated Beds are dangerous and are not recommended for children under the age of 6.
STRANGULATION HAZARD:
12. Never attach or hang items to any part of the bunk bed that are not designed for use with the bed for example, but not limited to
hook, belt, and jump ropes.
Tools Required For Assembly
Philips Screw Driver
DO NOT USE POWER TOOLS
TO ASSEMBLE THIS PRODUCT.
USE OF POWER TOOLS WILL
INVALIDATE ANY CLAIM AND
MAY DAMAGE THIS PRODUCT
MAKING IT UNSAFE.
DO NOT USE HAMMER
Tools Not Use

PARTS LIST
Pcs
Part Name
No.
Carton 1 of 5
2
20
Model: CK 6285
FITTING LIST
Carton 2 of 5
Carton 4 of 5
Pcs
SIDE PANEL (LOWER)
01 2
SIDE PANEL (UPPER)
02 2
METAL SIDE RAIL
33 4
RIGHT END PANEL
03 1
END PANEL
04 1
LADDER LEFT PANEL
05 1
LADDER BOTTOM PANEL
06 1
RIGTH PANEL (1ST LADDER STEP)
07 1
LEFT PANEL (1ST LADDER STEP)
08 1
LEFT PANEL (2ND LADDER STEP)
11 1
TOP PANEL (2ND LADDER STEP)
12 1
13 1
RIGHT PANEL (3RD LADDER STEP)
14 1
TOP PANEL (3RD LADDER STEP)
15 1
RIGHT PANEL (4TH LADDER STEP)
16 1
17 1
TOP PANEL (4TH LADDER STEP)
18 1
BACK PANEL (1ST LADDER STEP)
19 1
20 1
BACK PANEL (2ND LADDER STEP)
21 1
DOOR
22 1
DOOR
23 3
LVL SLATS BASE
35 32
TOP PANEL (1ST LADDER STEP)
09 1
LEFT AND RIGHT BASE (TRUNDLE)
30 2
CENTER BASE (TRUNDLE)
31 1
SUPPORT PANEL (TRUNDLE)
32 2
GUARDRAIL
34 2
Carton 3 of 5
RIGHT PANEL (2ND LADDER STEP)
10 1
LEFT PANEL (3RD LADDER STEP)
LEFT PANEL (4TH LADDER STEP)
BACK PANEL (LADDER)
Carton 5 of 5
FRONT PANEL (TRUNDLE)
26 1
RIGHT PANEL (TRUNDLE)
27 1
LEFT PANEL (TRUNDLE)
28 1
BACK PANEL (TRUNDLE)
29 1

PARTS LIST 20
3
Model: CK 6285
35 x16
34
02
03
01
02
34
01
04
30
31
30
32
29
28
27
26
23
22
19
20
07
09
10
12
15
18
21
05
x4
33
06
08
11
14
17
13
16
x3
x2
(2 set)

FITTING LIST 20
4
Model: CK 6285
USEFUL HINTS & TIPS
Two people will be required
to assemble this unit
Please keep this assembly
instruction for future reference
CAUTION
There are many small components used
in the construction of this unit. These
loose items should be kept away from
young children whilst assembling your
unit. As an extra precaution, screw
cover caps should be permanently
fixed in position. (Where applicable)
Fitting List
A60
Pcs
Part Name
No.
B
C
D
E
F
G
J
K
L
60
72
12
20
8set
M
N16
P
Cam Stud (5137)
Cam
M8 x 25mm Wood Dowel
22
H
8
38
Q
14mm Chipboard Screw
64
6
M6 x 15mm Allen Bolt
M6 x 13mm Baller
45mm Chipboard Screw
60
M6 x 45mm Allen Bolt
M6 x 30mm Allen Bolt
2
M6 x 50mm Allen Bolt
M6 JCN Nut
16
M6 Allen Wrech
M6 x 25mm Allen Bolt
25mm Plate Nylon Castes
Hinges Arm (VSV)

5
GUIDE TO ASSEMBLY 20
Model: CK 6285
STEP 1
DD
L
Dx 32 L x 8
08
11
14
17
08
11
14
17
B x 12 C x 12A x 2
STEP 2
C

6
GUIDE TO ASSEMBLY 20
Model: CK 6285
STEP 3
07
10
13
16
WHEN FITTING CAMS
ENSURE STARTING POSITION IS CORRECT
BEFORE YOU INSERT CONNECTING BOLT
TURN CLOCKWISE UNTIL SECURE
CORRECT WRONG
19
20
Turn Over
B x 20 C x 24A x 3
06
06

7
GUIDE TO ASSEMBLY 20
Model: CK 6285
STEP 4
STEP 5 STEP 6
15
12
09
18
C x 8A x 16
19 06
06
07

8
GUIDE TO ASSEMBLY 20
Model: CK 6285
STEP 7 STEP 8
STEP 9 STEP 10
STEP 11 STEP 12
A x 5
06
08 09
08
07
06
07
09
11
10
20
11
10
12

9
GUIDE TO ASSEMBLY 20
Model: CK 6285
STEP 13
STEP 15
STEP 14
STEP 16
A x 4
A x 2
15 15
12
14
13

10
GUIDE TO ASSEMBLY 20
Model: CK 6285
STEP 17
STEP 19
STEP 18
B x 6 C x 4A x 6
05
04
21
18
17
16

11
GUIDE TO ASSEMBLY 20
Model: CK 6285
STEP 20
STEP 21
E x 12
21
05
21
21
G x 4
P x 4
E
E
E
E
E
P
G
G
G
G
P
P

12
GUIDE TO ASSEMBLY 20
Model: CK 6285
STEP 22
02
N
N
x2
N
N
01
N
N
x2
N x 16
02
02
01
01
03
04
STEP 23
K x 16
K
K
K
K
K
K
K

13
GUIDE TO ASSEMBLY 20
Model: CK 6285
STEP 25
STEP 24
J x 20
P x 20
33 x4
P
P
P
J
J
J
J
J
J
JJ
J
J
JP
P
P
P
PP
P
P
P
J
G x 4
P x 4
21
P
P
P
P
G
G
G
G
04
03

14
GUIDE TO ASSEMBLY 20
Model: CK 6285
STEP 27
STEP 26
H x 32
35 x16
H
H
H
H
H x 32
H
35 x16
H
H

15
GUIDE TO ASSEMBLY 20
Model: CK 6285
STEP 28
STEP 30
P
34
G
34
G x 1
P x 1
STEP 29
F x 4
P x 4
F
P
P
F
G x 1
P x 1
34
P
G

16
GUIDE TO ASSEMBLY 20
Model: CK 6285
STEP 32
STEP 31
22
23 x3
D x 16
L x 8
D
D
L
23
23
23
22
STEP 33
34
F x 4
P x 4
P
P
F
F

17
GUIDE TO ASSEMBLY 20
Model: CK 6285
STEP 35
STEP 34
C x 24
B x 22A x 22
Turn Over
Turn Over
Turn Over
28
28
30 x2
31
29
29
27
27
26

18
GUIDE TO ASSEMBLY 20
Model: CK 6285
STEP 38
STEP 36 STEP 37
30
29
30
28
29
30
29 27
30
STEP 39

19
GUIDE TO ASSEMBLY 20
Model: CK 6285
STEP 42
STEP 40
31
STEP 43
STEP 41
26
G x 12 D x 12M x 6
32 x2
G
G
G
G
G
G
D
M
G

20
GUIDE TO ASSEMBLY 20
Model: CK 6285
STEP 44