RH Baby&child 355-117 User manual

The minimum age shall not be less than 15 months and
the maximum weight shall not be greater than 50 lbs (22.7 kg).
WARNING: Read all
Instructions before assembling
this product.
KEEP INSTRUCTIONS FOR
FUTURE USE.
Page 1 of 7
CUSTOMER SERVICE
If you are missing partsor have any questions about this product, contact us first. You can also order parts by writing to
the address above. Include the product model number, color, and a brief descriptionof the part.Call 1-800-762-1751.
CARE AND CLEANING
TOOLS AND INSTALLATION
Tools Necessary: Allen Key (included).
NOTE: It may be easier to assemble productwith two people.
NOTE: When inserting bolts, turn clockwise until tight. Then loosen 1/2-3/4 of aturn. After crib is completely assembled,
return to each bolt and tighten.
DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning.If the crib is to be stored, store in a cool
dry place and carefully package all original hardware to protect from loss.
COLE TODDLER BED – ASSEMBLY INSTRUCTIONS
Model No: 355 - 117
Made in Vietnam
Distributed in the U.S.A by:
RH Baby&Child
2900 N MACARTHUR DRIVE
TRACY, CA 95376
www.rhbabyandchild.com
Distributed in Canada by:
RH Canada, Inc.
1500-1055 West Georgia Street
Vancouver, British Columbia V6E4N7

Page 2 of 7
Infants have died in toddler beds from entrapment and strangulation.
Failure to follow these warnings and the assembly instructions could
result in serious injury or death.
NEVER use bed with children under 15 months.
NEVER place bed near windows where cords from blinds or drapes
may strangle a child.
The toddler bed not converted from full size crib.
Any mattress used in this bed shall bed a full-size crib mattress at least
51 5/8 in.(1310mm)in length, 27 1/4 in.(690mm)in width, the maximum
recommended thickness shall not be greater than 6 in.(150mm)
If guardrails are used as the mattress containment means, guardrail(s)
provided must be used to avoid the formation of a gap between the
mattress and the bed that could cause an entrapment.
DO NOT place bed near windows where cords from blinds or drapes
may strangle a child.
DO NOT place items with a string, cord, or ribbon around a child's neck,
such as hood strings or pacifier cords.
A child using the toddler or day bed shall be at least 15 months of age.
WARNING: ENTRAPMENT/STRANGULATION HAZARD
COLE TODDLER BED – ASSEMBLY INSTRUCTIONS
Model No: 355 - 117

Page 3 of 7
PARTS INCLUDED:
A
B
C
D
E
F
HARDWARE INCLUDED:
[2]
[1]
[1]
[2]
[1]
[1]
SIDE FRAME
BACK GUARD RAIL
FRONT GUARD RAIL
SIDE STRETCHER
CENTER STRETCHER
PLATFORM PANEL
AD
E
B
C
A
F
1
2
4
5
Threaded Rod 5/16”x 3”4 pcs.
Hex Wrench 12mm
4 pcs.
1 pc.
3Hex Nut 5/16”x 12mm 4 pcs.
NO. ITEM DESCRIPTIONQTY.
Curved Slotted Washer 5/16”
Connecting Bolt 4 pcs.
4 pcs.
4 pcs.
6Camlock Wheel
7Assembling Insert
8Allen Key 5mm x 64L 1 pc.
TOOLS NEEDED
Phillips-head screwdriver (not included)
COLE TODDLER BED – ASSEMBLY INSTRUCTIONS
Model No: 355 - 117

ASSEMBLY INSTRUCTIONS
Note: - Bed must be assembled by at least two people.
- Please read instructions carefully before assembling bed.
- Use the above parts and fittings list to identify each component.
- Keep all packing materials until assembly is complete to avoid loss of smaller parts.
- Do not completely tighten all bolts until all steps are finished.
STEP 1:
Page 4 of 7
HARDWARE INCLUDED:
9
10
12
Short Bolts 5/16”x 1-1/2”2 pcs.
NO. ITEM DESCRIPTIONQTY.
Allen Key 4mm 1 pc.
11 Long Bolts 5/16”x 2-1/4”4 pcs.
Screw 8 x 30mm 16 pcs.
Insert the Threaded Rods (1) into the
posts of the Side Frames (A).
1
A
A
A
COLE TODDLER BED – ASSEMBLY INSTRUCTIONS
Model No: 355 - 117

Page5 of 7
STEP 3:
Insert the Connecting Bolts (5)
into the Side Frames (A).
A
A
B
B/C
C
5
11
10
3
2
4
A
A
A
STEP 2:
- Slide the Back/Front Guard Rails (B/C) onto the Side
Frames (A). Insert Curved Slotted Washers (2), and Hex
Nuts (3), and tighten with Hex Wrench (4).
- Attach the Back/Front Guard Rails (B/C) onto the Side
Frames (A) using Long Bolts (11), and tighten with Allen
Key (10).
- Do not tighten bolts completely at this time, in order
to leave room for installation of Stretcher (D) (next step).
1
A
COLE TODDLER BED – ASSEMBLY INSTRUCTIONS
Model No: 355 - 117

STEP 4:
Position the Side Stretcher (D) between the Side
Frames (A).
Place Assembling Insert (6) into the holes inside of
the Side Stretcher (D) by aligning the hole of the
Assembling Insert (6) to the Connecting Bolt (5).
Then inserting Camlock Wheel (7) into Assembling
Insert (6) and twist to tighten by counter clockwise
direction using Allen Key (8).
STEP 5:
Insert the Center Stretcher (E) onto the top
of Side Frames (A) by using Short Bolts (9),
and use Allen Key (10) to tighten.
Also tighten all guard rail bolts.
Page 6 of 7
A
D
5
6
78
A
A
A
66
9
10
E
COLE TODDLER BED – ASSEMBLY INSTRUCTIONS
Model No: 355 - 117

Page 7 of 7
After crib is completely assembled, return
to each bolt and tighten to snug fit.
DO NOT over tighten.
WARNING:
12
12
16 pcs
Phillips-head screwdriver.
STEP 6:
Lay the Platform Panel (F) between the Side
Frames (A) and attach using Screws (8) with
Phillips-head screwdriver.
F
F
COLE TODDLER BED – ASSEMBLY INSTRUCTIONS
Model No: 355 - 117
CARE INSTRUCTIONS:
1. DUST OFTEN USING A CLEAN, SOFT, DRY LINT- FREE CLOTH.
2. BLOT SPILLS IMMEDIATELY AND WIPE WITH A CLEAN, DAMP CLOTH.
3. DO NOT USE CHEMICAL CLEANSERS, ABRASIVES OR FURNITURE POLISH ON THE LACQUERED FINISH.