Flexwatch FW1177 User manual

FW1177 User’s Manual
M4042-03 1 Seyeon Tech Co., Lt
FW1177 User’s Manual
(Product Guide)
Version 4.12(Rev.E)
eptember 30, 2011
Class A Digital Device (industrial & commercial environment)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to CE and
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.

FW1177 User’s Manual
M4042-03 2 Seyeon Tech Co., Lt
FW1177 User’s Manual
Document Part Number: M4042-03
Document Version: 4.12(Rev.E)
Revise : September 30, 2011
About This Document
This ocument is prepare for users of FW1177 supplie by Seyeon Tech Co., Lt . It is assume that the
users are familiar with Microsoft Win ows operating systems an Web browsers such as Internet Explorer.
It is also assume that the users are well aware of how to install an use the network equipment such as
LAN, Hub, router, an having basic knowle ge of network terminologies. If you have any questions
regar ing network installations, please contact your network equipment ven or or network a ministrator
or Internet service provi ers.
For up ate contents, etaile features an other applications from Seyeon Tech, please refer to the user’s
manual in CD-ROM provi e with the pro uct you purchase , or visit Seyeon Tech’s Internet homepage at
http://www.flexwatch.com/.
Copyright Notice
Copyright © 2011 Seyeon Tech Co., Lt . All rights reserve .
No part of this ocument may be repro uce in any form or by any means without the prior written
permission of Seyeon Tech Co., Lt .
Disclaimer
Seyeon Tech Co., Lt . (Seyeon Tech) Makes no representations or warranties with respect to the contents
hereof. In a ition, information containe herein is subject to change without notice. Every precaution has
been taken in the preparation of this manual, nevertheless, Seyeon Tech assumes no responsibility for
errors or omissions or any amages resulting from the use of the information containe in this ocument.
Trademar s
FlexWATCH
®
an FlexWATCH
®
Logo are tra emarks of Seyeon Tech Co., Lt .
Win ows an Internet Explorer are a tra emark of Microsoft Corporation.
All other tra emarks belong to their respective owners.
Technical Support
For technical support call, email, or visit our web site.
Telephone: [phone]
Email: [email protected]
Web site: http://www.flexwatch.com or http://www.seyeon.co.kr

FW1177 User’s Manual
M4042-03 3 Seyeon Tech Co., Lt
Contents
1. PRODUCT OVERVIEW ......................................................................................................................... 4
1.1. FW1177 .......................................................................................................................................................................... 4
1.2. K EY F EATURES ................................................................................................................................................................. 5
1.3. T ECHNICAL S PECIFICATION ........................................................................................................................................... 6
1.4. FW1177 P ACKING L IST ................................................................................................................................................ 9
2. HARDWARE DESCRIPTION .............................................................................................................. 10
2.1. FW1177-DE ................................................................................................................................................................ 10
3. FW1177 INSTALLATION AND BASIC SETUP ................................................................................. 11
3.1. B EFORE I NSTALLATION ................................................................................................................................................. 11
3.2. F ACTORY D EFAULT S ETTINGS ..................................................................................................................................... 11
3.3. I NSTALLING FW1177 .................................................................................................................................................. 11

FW1177 User’s Manual
M4042-03 4 Seyeon Tech Co., Lt
1. Product Overview
1.1. FW1177
FlexWATCH® 1177 is a stand-alone device transmitting video from built-in PTZ camera over
IP(Internet Protocol) network. There is one type of FW1177 model: DE.
It can transmit up to 30fps@D1 over the existing network. You can monitor video of FW1177 through web
browser(ie. MS Internet Explorer), if FW1177 is connected to network. FW1177 supports video compression
both Motion-JPEG and H.264 simultaneously so that user can choose appropriate video compression for the
purpose. For both Motion-JPEG and H.264, FW1177 provides 6 levels of video quality.
Picture 1 : FW1177-DE

FW1177 User’s Manual
M4042-03 5 Seyeon Tech Co., Lt
1.2. Key Features
 Standalone device built-in web server
 10M/100M Auto Sensing Ethernet
 Configuring and controlling through Web browser
 Max 30 fps transmission speed on TCP/IP network
 Effective Bandwidth & Bit-rate Control (VBR/CBR) by H.264
 Supports Dual Stream (Motion JPEG & H.264)
 1ch Voice Encoding / 1ch Voice Decoding
 Support Dynamic IP users by IPCCTVDNS server
 Support PTZ (Pan/Tilt/Zoom) function
 Support Sensor Input, Digital Output
 Support Transparent
 Built-in 2 way Audio transmission (1ch A-in, 1 A-out)
 Encryption function by user authentication
 Image transmission function via FTP, Email

FW1177 User’s Manual
M4042-03 6 Seyeon Tech Co., Lt
1.3. Technical Specification
FW1177-DE
Hardware
32bit Embedded CPU
NAND Flash 128Mbytes / DDR2: 128Mbytes
Linux version 2.6.xx operating system
Battery backed up real-time clock
Image sensor
1/4”Sony 410K Super HAD CCD
Resolution: 520 TV Lines
[Detail]
S/N ratio: 50dB or more (AGC OFF)
Electronic shutter speed :
1/60 ~ 1/100,000 sec (NTSC)
1/50 ~ 1/100,000 sec (PAL)
White Balance: ATW (1,800K~10,500K),AWC,MWB
Lens
IRIS control : Auto & Manual
F1.4-30, f=3.3 mm wide to 99.0 mm tele
Angle of view : 2.3~62.0 horizontal
Shutter speed : Auto or 1/120~1/60,000 sec
Minimum illumination Color : 0.4 Lux (F1.6) B*W : 0.1 Lux (F1.6)
DSS( Digital Slow Shutter) : 0.0007 Lux (F1.6)
Video related special
functions
DIS (Digital Image Stabilizer) - protection from variation
AGC (Auto Gain Control)
DSS (Digital Slow Shutter)
BLC (Back Light Compensation)
ICR (Day & Night)
SSNR (Noise Reduction at Low Light)
Video compression Motion JPEG
H.264
Resolution 720x480, 704x480, 352x240, 176x112
Frame rate
(each channel) Motion JPEG : Up to 30 fps @ 4CIF (Other Stream at QCIF) H.264 : Up to 30 fps @ 4CIF (Other Stream at QCIF)
Video Streaming Motion JPEG and H.264 Dual Streaming (Simultaneously)
Controllable frame rate and bandwidth
Image setting Compression levels: 6 (Motion-JPEG, H.264)
Color: color, black & white
Pan/Tilt /Zoom
Zoom : x33 (Optional: x27, x37), digital x12
Max Speed : Pan 360°/sec, Tilt 200°/sec@preset mode
Rotation Angle : Pan 360°(endless), Tilt: 92°(auto f lip)
32 Preset Positions
Swing, Group, tour, 16 privacy zone
Audio 8 bit PCM (G.711-u-low), Sampling rates 8KHz, Mono Audio
1ch in & 1ch ou
LAN interface 10/100BaseT Ethernet auto sensing
Alarm I/O Interface 1 Photo-coupled inputs and 1 Relay output

FW1177 User’s Manual
M4042-03 7 Seyeon Tech Co., Lt
Audio Input(MIC)
Input Impedence : 4 KOhm
Pantom Power : 3.3 Volt
Gain : 20 dB
Jack : 3.5mm Mono
Audio Output(SPK)
Output Impedence : 160 Ohm
Output Power : 50 mWatt
Output Voltage : Peek To Peek 1 Volte
Jack : 3.5mm Stereo
Power Over Ethernet None
Serial Interface Two serial ports for console, serial input/output device, PTZ
COM Port is RS-232,
Max Baudrate : 115200 bit/s
Security features Multi user level protection for amera access
PTZ, Alarm I/O
Advanced Service Up to 5.6M memory for Pre/Post alarm buffer E-Mail, FTP, IP notification, Alarm Notification to e-mail
CGI Call by event or schedule
Built-in Motion detections Accuracy : 12x12=144 blocks
Motion Sensitivity : -100 ~ 100 : 100 is hypersensitive
PTZ & UART Control
Support Built-in PTZ device is controled through AUX
UART control X10 device
Dial in/out via PSTN or GSM modem
Management Configurable by serial, web or telnet
Remote system update via telnet, FTP OR web browser
Developer support Provides HTTP CGI API
ActiveX control development kit
PWR Supply Transformer Input : 100~240VAC, 1A
Output : AC 24 Volt, 1.5A
PWR Consumption AC 24Volt 1.0A
Operating Environment Temperature : 32°~ 122°F (0°~ 50°C)
Humidity : 20 ~ 80% RH(non-condensing)
Miscellaneous Freely downloadable NDVR Software Work with FW-Manager( NDVR S/W)
Dynamic IP support through IPCCTVDNS
Simultaneous users Live-cast for up to 16 clients
Installation, management
and maintenance Installation CD and web-based configuration Firmware upgrades over HTTP or FTP, firmware available at www.flexwatch.com
Video access from Web
browser Video access from Web browser
Minimum Web browsing
requirements
Pentium 4, 2 GHz, 2GB(RAM) or higher
Video Card: 256MB RAM, 1024x768 resolution or higher
100Mbps Network Adaptor or faster
Windows XP Pro or later
Internet Explorer 6.x or later

FW1177 User’s Manual
M4042-03 8 Seyeon Tech Co., Lt
System integration support
Powerful API for software integration available at http://www.flexwatch.com, including
Simple Viewer API, FlexWATCH Control SDK, event trigger data in video stream,
embedded scripting and access to serial port peripherals over HTTP/TCP
User can be installed user program daemon for event notification or sending image
Embedded operating system: Linux 2.6
Supported protocols HTTP, RTP/RTSP, TCP/IP, FTP, Telnet, RARP, PPPoE, PAP, CHAP, DHCP, SMTP
client(e- mail), NTP
Applications
(not included) FlexWATCH Manager 16/32/128/256
Included Accessories Power supply 24 V AC / Power cord
CD (User’s Manual, installation wizard and etc)
Approvals
MIC
FCC : Class A
CE : Class A
RoHS
IP66
Dimensions (HxWxD) and
weight (1lbs = 454g) 216.8Ø x 289.2(H) (in mm) About 5.5kg without power supply
* All specifications are subject to change without prior notice.
Table 1 : FW1177 Data Sheet

FW1177 User’s Manual
M4042-03 9 Seyeon Tech Co., Lt
1.4. FW1177 Packing List
FW1177-DE (Bracket Included) 1ea
Power Supply Unit
(24V AC Power Cord) 1ea
CD (User’s Manual, installation wizard and etc) 1ea
Table 2 : FW1177 Packing List
Note: Please check all the listed items are included in your package. For any missing items,
please contact your local distributor.

FW1177 User’s Manual
M4042-03 10 Seyeon Tech Co., Lt
2. Hardware Description
2.1. FW1177-DE
Picture 2 : FW1177-DE
Name Description
A
PTZ Camera Camera supporting PTZ(Pan/Tilt/Zoom)
B
BODY Frame Body Frame for Camera
C
Bracket Wall Mount Bracket
Table 3 : FW1177-DE
A
B
C

FW1177 User’s Manual
M4042-03 11 Seyeon Tech Co., Lt
3. FW1177 Installation and Basic Setup
3.1. Before Installation
 Read carefully User's Manual.
 Check User’s Network (IP Address, Network Mask and default gateway)
 Secure IP address for FW1177.
3.2. Factory Default Settings
The following table shows the factory default condition. Please refer to this when you need to change
the values on admin menu.
Factory Default
Admin ID root
Admin password root
IP address 10.20.30.40
Network mask 255.255.255.0
Gateway 10.20.30.1
Wireless LAN (Option) Disabled
Table 5 : Factory Default
Note: Factory default Admin ID and Password are all lower case letters. You can change the
password with Capital letters.
3.3. Installing FW1177
Following steps are the physical installation process for FW1177.
1. Fix the FW1177 in place
2. Connect the FW1177 to the Internet cable through the LAN port.
3. Connect the power supply of FW1177.
After that, you need to follow the steps below.
 Network Configuration: Refer to “IP Installer User’s Manual”
 Camera Configuration: Refer to “FlexWATCH Admin Menu User’s Manual”
 Service Configuration: Refer to “FlexWATCH Admin Menu User’s Manual”