Flow 836 ONT User manual

SET TOP BOX
INSTALLATION GUIDE
TROUBLESHOOTINGGET TO KNOW
YOUR EQUIPMENT
1. The FLOW Set Top Box has no power
Ensure the power cable is connected securely to the Set
Top Box and to the power source.
2. The FLOW Set Top Box LED stays red
Press the power button on the FLOW Remote or unplug
and reconnect the power cable.
3. My television says “No signal”
Ensure the HDMI or RCA/AV cable is connected
securely to the Set Top Box and to your television.
Ensure your television is on the correct source input.
4. My television says “Connection Problem, Please
ensure all cables are connected”
Ensure the Ethernet cable is connected securely to lan
2, 3 or 4 on the ONT and to the Set Top Box. If the
problem persist, please contact Customer Care at
1-800-804-2994.
5. Channels are not loading
Reboot the Set Top Box by unplugging and reconnecting
the power cable. If the problem persist, please contact
Customer Care at 1-800-804-2994.
6. My Television says “DRM License error”
Try navigating to channel 127 using the FLOW remote
or select any channel from the EPG/Guide menu OR
you can reboot the Set Top Box by unplugging and
reconnecting the power cable. If the problem persists,
please contact customer care at 1-800-804-2994.
836 ONT
844 ONT
SET TOP BOX
Ethernet ports 1 – 4
Ethernet port 1 is provisioned
for the delivery of the internet
service while Ethernet ports
2-4 are provisioned for the
delivery of the IPTV service.
Ethernet ports 1 – 4
Ethernet port 1 is provisioned
for the delivery of the internet
service while Ethernet ports
2-4 are provisioned for the
delivery of the IPTV service.
a. Power Indicator
b. SIM card
c. CABLE IN (Coaxial)
d. A/V OUT
e. USB port
f. HDMI port
g. IR input
h. ETHERNET port
i. Power cable connector
j. USB port
FRONT
FRONT
FRONT
BACK
BACK
BACK
IPTV Ports
IPTV
Ports
a
bj
c d ef g h i
discoverflow.co/barbados/tvselfinstall

STEPS TO SET UP YOUR
FLOW SET TOP BOX
This easy step-by-step guide takes the guess work out of installation
and gets you on your way to a world of entertainment in no time.
WHAT ELSE YOU’LL FIND IN THIS BOX
Remote Control
HDMI Cable RCA/AV Cable
Power Cable Ethernet Cable
HOW TO INSTALL
THE SET TOP BOX
STEP 1
Connect one of end of the ethernet cable provided to the
available ethernet IPTV port at the back of your Optical
Network Terminal (ONT). (Port 2,3 or 4 only)
Connect the other end of the ethernet cable to the ethernet
port at the back of the Set Top Box.
STEP 2
HDMI Input: Connect the HDMI cable provided to the
available HDMI port on your television. Connect the other
end of the HDMI cable to the HDMI port at the back of the
FLOW Set Top Box.
3
2
1
OR
RCA/AV input: Connect the RCA/AV cable provided to
the RCA/AV ports on your television. Connect the other end
of the RCA/AV cable to the A/V Out port at the back of the
FLOW Set Top Box
STEP 3
Connect the power cable to the power cable port at the
back of the FLOW Set Top Box. Connect the other end of the
power cable to the electrical power source.
STEP 4
Ensure your television is on the corresponding source input
the FLOW Set Top Box is connected to on your television.
3
1
2
HOW TO INSTALL
THE SET TOP BOX