Flower House FHEG101 User manual

(4) Legs
(4) Rubber feet
(1) Lower Bow with feet connectors
(1) Upper Bow
(1) Top Pin
(1) Lower Pin
(6) Nuts and Bolts
(1) Seat Spring
(4) Catch Pins
(1) Main Chair C-Frame
(1) Bottom Cushion
(1) Leisure Cushion
(1) Allen Wrench
Egg Chair FHEG101 Part List

Egg Chair FHEG101 Assembly Instructions
1. Open the package
and unwrap the four
short legs and put
rubber feet on each of
the four legs
2. Bolt the four legs
to the X-frame base
of the Egg Chair
Stand
3. Put nuts and bolts
in middle of C frame
stand
4. Open egg chair frame
completely and put the
four catch pins in place
Make sure the flat tops
are on the inside of the
chair so they do not
poke through the fabric
or through the seat
5. Put the longer of the
two swivel pins in the
top of the C frame
stand
6. Attach seat spring to
swivel pin
7. Put the shorter of the two
swivel pins through the top
of the chair and through the
grommet
8. Then attach to spring on
stand
9. Make sure all
fasteners are tight in the
seat frame is straight I
just your pillows the way
you like put in a good
level location and enjoy
your egg chair thank you
for your business
*US and foreign patents pending