Fluance Fi20 User manual

Fluance Fi20 Quick Start Guide
Quick Start Guide
Fi20 - Portable Bluetooth®Speaker

Fluance Fi20 Quick Start Guide
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in anyway, such as power supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
15. Do not place open ame sources on or near the unit.
16. Batteries must be disposed of in accordance with local environmental regulations. Please
recycle batteries!
17. Minimum 5cm around the apparatus for sufcient ventilation.
18. The ventilation should not be impeded by covering the ventilation openings with items,
such as newspapers, table-cloths, curtains, etc.
19. The use of apparatus in tropical climates.
20. The battery shall not be exposed to excessive heat such as sunshine, re or the like.
21. The battery is not intended to be replaced by USER, replace battery must be performed
by authorized professional service staff.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.

Fluance Fi20 Quick Start Guide
Introduction
Fluance has successfully revolutionized the home audio industry. Fluance develops a broad
line of high-delity products based on ve key aspects: Sound Quality, Solid Construction,
Performance, Style, and Value. These distinctive points make Fluance the most reliable and
respected name among our fans and ensure your music is heard the way your favorite artist
intended.
Today, Fluance expands on this vision and takes its approach to a new level. With our
dedicated team, Fluance assures its products meet the most stringent marks of quality
control - overseeing each step from design to manufacturing - and has raised the industry
bar in customer experience and quality to be second-to-none.
Break-in Period
Our speakers have a Butyl rubber ring surrounding the cone. The break-in period allows the
rubber to loosen and stretch, allowing the cone a larger range of movement, which gives
a better sound reproduction. We recommend 10-12 hours of play at moderate volume to
achieve this.
What’s Included
Fi20
Speaker
Quick Start
Guide
LIFETIME
Customer Support
Lifetime
Customer Support
2 Year
Warranty
Power
Adapter

Fluance Fi20 Quick Start Guide
Top & Back Panel Layout
Top
1. Status LED
2. Microphone
3. Power Button
Hold: ON/OFF
Tap: Battery Check
4. Light
5. Speaker Phone
6. Back
7. Play/Pause
8. Forward
9. Volume Down
10. Volume Up
POWER
AUX IN
RESET
11
12
13
14
15
1
2
3
4 5 6 7 8 9 10
Back
11. Handle
12. Light
13. Bluetooth®Reset Button
14. Aux Input
15. Power Input

Fluance Fi20 Quick Start Guide
First Time Use
Power ON
Press and Hold the Power Button for
1 second to turn On/Off
Unit will automatically turn off after 15
minutes of inactivity to preserve battery
1 Sec.
Charging the Battery
Connect to wall outlet using included
Power Adapter
The Fi20 has a charge time of 3.5 hours.
Checking the Battery
Tap the Power Button to check the battery
when the unit is on
The Fluance Fi20 has 8 hours of battery life
when playing music at moderate volume.
LED will show battery level (Green, Yellow,
Red) for 4 seconds. LED will change to Red
when battery level is low.
POWER
AUX IN
RESET

Fluance Fi20 Quick Start Guide
Connecting Bluetooth®
Pair to “Fluance Fi20” on your source device
If unable to connect you can reset the Bluetooth®function on the Fi20 using the Bluetooth®
Reset button on the back of the unit.
Aux Playback
Connect to audio source using 3.5mm aux cable (not included)
Connecting an Aux cable will override the Bluetooth®function. To use Bluetooth®, the Aux
cable must be removed.
Bluetooth
MY DEVICES
Settings
Fluance Fi20
POWER
AUX IN
RESET
Playback
Music Playback
Volume Control
Speaker Phone

Fluance Fi20 Quick Start Guide
Frequently Asked Questions
What is “auto-pairing” and how does it work?
Auto-Pairing is a convenient connection feature implemented into all Fluance Bluetooth®
Speakers. When the Fi20 is turned on it will automatically connect to the last device that it
was connected to. If the connected Bluetooth®enabled device leaves the connection range
of the Fi20 and returns at a later time, the device will automatically connect.
Note: The Fluance Fi20 will only Auto-Pair to the last device that it was connected to.
Is the handle designed to rotate?
The handle on the Fi20 is designed to be positioned up for carrying or down for stationary
playback. The handle should rotate freely.
What does the LED’s color/behavior mean?
White (Flashing) – Bluetooth®Pairing mode
White (Solid) – Bluetooth®Paired/Aux Connected
Green – 100% - 40% Battery Level
Yellow – 39% - 15% Battery Level
Red – 14% - 0% Battery Level
Another device is connected to the Fi20 and I wish to connect my device.
You can reset any Bluetooth®connection by pressing the Bluetooth® Reset button on the
back of the Fi20. Please note only one device can be paired at a time.
What is the range of the Bluetooth®Connection?
The Fi20 operates with Power Class 2 Bluetooth®devices, which have a range of
approximately 33’ feet (line of sight).
How do I adjust the Volume settings?
Use the +/- buttons on the top of the Fi20 to increase or decrease the volume of the Fi20. You
can also adjust the volume of your source device.

Fluance Fi20 Quick Start Guide
Certification Information
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. This equipment complies with FCC
radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the radiator & your body.
IC Warning
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) This device may not cause interference, and (2)
This device must accept any interference, including interference that may cause undesired
operation of the device.
CAN ICES-3(B)/NMB-3(B)
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Déclaration d’ICLe présent appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. Son fonctionnement est soumis aux deux conditions
suivantes :(1)l’appareil ne provoquera pas d’interférences nuisibles,et(2) il doit accepter les
interférences reçues, y compris celles pouvant provoquer un fonctionnement non désiré.
Cet équipement doit être installé et utilisé à une distance minimale minimale de 20 cm entre
le radiateur.

Fluance Fi20 Quick Start Guide
Warranty Information
Fluance gives the following warranty to the original customer of each new Fluance product
purchased from a dealer authorized by Fluance. Fluance warrants that each new product,
under normal use, is free from defects, subject to the terms and conditions set forth. If a
defect should occur within the warranty period, repairs will be made free of charge for parts
and labor when such defects are determined by us to be attributable to faulty materials or
workmanship at time of manufacture.
Warranty Period
The Fluance products listed below are warranted for parts and labor for the stated period
from the date of original purchase and are subject to the terms and conditions of the
warranty.
Home Audio Passive Speakers: Lifetime Warranty
Active/Powered Speakers: 2 Year Warranty
HiFi Turntables: 2 Year Warranty
Warranty Exclusions
• Products purchased from a dealer not authorized by Fluance.
• Products with the serial number defaced, altered or missing.
• Defects resulting from disaster, accident, abuse, misuse, lightning, power surges, neglect,
unauthorized modication or water damage.
• Defects or damage as a result of repairs performed by a person or party not authorized
by Fluance.
• Defects or damage occurring during shipping (claims should be made with the shipping
company).
To Obtain Warranty Service
Should your Fluance product require warranty service, please contact your Fluance Autho-
rized Dealer and send your product fully insured and freight prepaid to the nearest Fluance
authorized service center. Before sending to Fluance, you will be required to get a Return
Authorization Number from your dealer.
Products shipped without a valid Return Authorization Number will be refused. To avoid
possible shipping damage, make sure the product is properly packaged and well protected.
Include a copy of your original bill of sale as proof of warranty along with your name, home
and/or work telephone number(s), a complete return address and a detailed description of
the faults.
Products repaired within warranty will be returned freight prepaid. This warranty in itself is
not considered a valid proof of purchase. When applying for warranty repairs, you must
present the original copy of your bill of sale as proof of warranty.

Fluance Fi20 Quick Start Guide
Notes

Fluance Fi20 Quick Start Guide
Notes

Fluance Fi20 Quick Start Guide
Fluance.com