Fluidwell F040-T User manual

F040-T
TEMPERATURE INDICATOR
Signal input sensor: PT100
Options: Intrinsically Safe.
F-Series - Field mounted indicators for safe and hazardous areas. More info: www.fluidwell.com/fseries

HF040TEN_v0402_03 Atex_IECEx_CSA_FM
Page 2
SAFETY INSTRUCTIONS
Any responsibility is lapsed if the instructions and procedures as described in this manual
are not followed.
LIFE SUPPORT APPLICATIONS: The F040-T is not designed for use in life support
appliances, devices, or systems where malfunction of the product can reasonably be
expected to result in a personal injury. Customers using or selling these products for use
in such applications do so at their own risk and agree to fully indemnify the manufacturer
and supplier for any damages resulting from such improper use or sale.
Electro static discharge does inflict irreparable damage to electronics! Before installing or
opening the unit, the installer has to discharge himself by touching a well-grounded object.
This unit must be installed in accordance with the EMC guidelines (Electro Magnetic
Compatibility).
Do connect a proper grounding to the aluminum casing as indicated if the F040-T has been
supplied with the 115-230V AC power-supply type PM. The green / yellow wire between the
back-casing and removable terminal-block may never be removed.
Intrinsically Safe applications: follow the instructions as mentioned in Chapter 5 and
consult “Fluidwell F0..-..-XI - Documentation for Intrinsic Safety”.
DISPOSAL
At the end of its life this product should be disposed of according to local regulations
regarding waste electronic equipment. If a battery is present in this product it should be
disposed of separately. The separate collection and recycling of your waste equipment will
help to conserve natural resources and ensure that it is recycled in a manner that protects
the environment.
SAFETY RULES AND PRECAUTIONARY MEASURES
The manufacturer accepts no responsibility whatsoever if the following safety rules and
precautions instructions and the procedures as described in this manual are not followed.
Modifications of the F040-T implemented without preceding written consent from the
manufacturer, will result in the immediate termination of product liability and warranty period.
Installation, use, maintenance and servicing of this equipment must be carried out by authorized
technicians.
Check the mains voltage and information on the manufacturer's plate before installing the unit.
Check all connections, settings and technical specifications of the various peripheral devices
with the F040-T supplied.
Open the casing only if all leads are free of potential.
Never touch the electronic components (ESD sensitivity).
Never expose the system to heavier conditions than allowed according to the casing
classification (see manufacture's plate and chapter 4.2.).
If the operator detects errors or dangers, or disagrees with the safety precautions taken, then
inform the owner or principal responsible.
The local labor and safety laws and regulations must be adhered to.

HF040TEN_v0402_03 Atex_IECEx_CSA_FM
Page 3
ABOUT THE OPERATION MANUAL
This operation manual is divided into two main sections:
The daily use of the unit is described in chapter 2 "Operation". These instructions are meant for
users.
The following chapters and appendices are exclusively meant for electricians/technicians. These
provide a detailed description of all software settings and hardware installation guidance.
This operation manual describes the standard unit as well as most of the options available. For
additional information, please contact your supplier.
A hazardous situation may occur if the F040-T is not used for the purpose it was designed for
or is used incorrectly. Please carefully note the information in this operating manual
indicated by the pictograms:
A "warning" indicates actions or procedures which, if not performed correctly, may lead to
personal injury, a safety hazard or damage of the F040-T or connected instruments.
A "caution" indicates actions or procedures which, if not performed correctly, may lead to
personal injury or incorrect functioning of the F040-T or connected instruments.
A "note" indicates actions or procedures which, if not performed correctly, may indirectly
affect operation or may lead to an instrument response which is not planned.
Hardware version : FB03.13.xx
Software version : 03.02.xx
Manual : HF040TEN_v0402_03 Atex_IECEx_CSA_FM
© Copyright 2012 : Fluidwell bv - The Netherlands.
Information in this manual is subject to change without prior notice. The
manufacturer is not responsible for mistakes in this material or for incidental
damage caused as a direct or indirect result of the delivery, performance or
use of this material.
© All rights reserved. No parts of this publication may be reproduced or used
in any form or by any means without written permission of your supplier.

HF040TEN_v0402_03 Atex_IECEx_CSA_FM
Page 4
CONTENTS MANUAL
Safety instructions ........................................................................................................................................... 2
Disposal .................................................................................................................................................... 2
Safety rules and precautionary measures ....................................................................................................... 2
About the operation manual ............................................................................................................................ 3
Contents manual.............................................................................................................................................. 4
1. Introduction ................................................................................................................................. 5
1.1. System description of the F040-T.......................................................................................... 5
2. Operational.................................................................................................................................. 6
2.1. General .................................................................................................................................. 6
2.2. Control panel.......................................................................................................................... 6
2.3. Operator information and functions ....................................................................................... 7
3. Configuration............................................................................................................................... 8
3.1. Introduction ............................................................................................................................ 8
3.2. Programming SETUP-level.................................................................................................... 8
3.2.1. General .................................................................................................................................. 8
3.2.2. Overview functions SETUP level ......................................................................................... 11
3.2.3. Explanation of SETUP-functions.......................................................................................... 11
1 - Temperature .............................................................................................................. 11
2 - Display ....................................................................................................................... 11
3 - Power management .................................................................................................. 12
4 - Sensor ....................................................................................................................... 12
5 - Others ........................................................................................................................ 13
4. Installation ................................................................................................................................. 14
4.1. General directions................................................................................................................ 14
4.2. Installation / surrounding conditions .................................................................................... 14
4.3. Dimensions- Enclosure ........................................................................................................ 15
4.4. Installing the hardware......................................................................................................... 17
4.4.1. Introduction .......................................................................................................................... 17
4.4.2. Terminal connectors with power supply - type : PB / PX..................................................... 18
4.4.3. Terminal connectors with power supply - type : PF / PM .................................................... 19
5. Intrinsically safe applications..................................................................................................... 20
5.1. General information and instructions: .................................................................................. 20
5.2. Terminal connectors Intrinsically Safe applications: ............................................................ 21
5.3. Configuration examples Intrinsically Safe applications:....................................................... 22
5.4. Battery replacement instructions.......................................................................................... 23
6. Maintenance.............................................................................................................................. 24
6.1. General directions................................................................................................................ 24
6.2. Repair................................................................................................................................... 24
Appendix A: Technical specification .............................................................................................................. 25
Appendix B: Problem solving......................................................................................................................... 27
Index of this manual....................................................................................................................................... 28
List of figures in this manual .......................................................................................................................... 29
Notes .................................................................................................................................................. 30

HF040TEN_v0402_03 Atex_IECEx_CSA_FM
Page 5
1. INTRODUCTION
1.1. SYSTEM DESCRIPTION OF THE F040-T
Functions and features
The temperature monitor model F040-T is a microprocessor driven instrument designed to display
the actual temperature.
This product has been designed with a focus on:
ultra-low power consumption to allow long-life battery powered applications (type PB / PC),
intrinsic safety for use in hazardous applications (type XI),
several mounting possibilities with GRP or aluminum enclosures for industrial surroundings,
ability to process all types of sensor signals,
Sensor input
This manual describes the unit with a 2, 3 or 4 wire PT100 temperature input type from the sensor
"-T version". Other versions are available to process a 0/4-20mA or 0-10V sensor signal.
Fig. 1: Typical application for the F040-T.
Configuration of the unit
The F040-T has been designed to be implemented in many types of applications. For that reason, a
SETUP-level is available to configure your F040-T according to your specific requirements.
It includes several important features, such as measurement units, display options etc. All setting
are stored in EEPROM memory and will not be lost in the event of power failure. To extend the
battery-life time, please use of the power-management functions as described in chapter 3.2.3.
Display information
The unit has a very large transflective LCD with all kinds of symbols and digits to display measuring
units, status information and key-word messages.
Temperature values are displayed with the large 26mm (1”) digits while the smaller 8mm (0.31”)
digits will display the measuring unit.
Options
The following options are available: intrinsic safety, power- and sensor-supply options, panel-mount,
wall-mount and weather-proof enclosures, flame proof enclosure and LED backlight.
Overview typical application F040

HF040TEN_v0402_03 Atex_IECEx_CSA_FM
Page 6
2. OPERATIONAL
2.1. GENERAL
The F040-T may only be operated by personnel who are authorized and trained by the
operator of the facility. All instructions in this manual are to be observed.
Take careful notice of the " Safety rules, instructions and precautionary measures " in the front
of this manual.
This chapter describes the daily use of the F040-T. This instruction is meant for users / operators.
2.2. CONTROL PANEL
The following keys are available:
Fig. 2: Control Panel.
Functions of the keys
This key is used to program and save new values or settings.
It is also used to gain access to SETUP-level; please read chapter 3.
The arrow-key is used to increase a value after PROG has been pressed
or to configure the unit; please read chapter 3.
The arrow-key is used to select a digit after PROG has been pressed or to
configure the unit; please read chapter 3.

HF040TEN_v0402_03 Atex_IECEx_CSA_FM
Page 7
2.3. OPERATOR INFORMATION AND FUNCTIONS
In general, the F040-T will always act at Operator level. The information displayed is dependant
upon the SETUP-settings. The signal generated by the connected sensor is measured by the
F040-T in the background, whichever screen refresh rate setting is chosen. After pressing a key, the
display will be updated very quickly during a 30 second period, after which it will slow-down again.
Fig. 3: Example of display information during process.
For the Operator, the following functions are available:
Display temperature
This is the main display information of the F040-T. After selecting any other information, it will
always return to this main display automatically.
Temperature is displayed on the upper-line of the display and the measuring unit on the
bottom line.
When "-------" is shown, then the value is too high to be displayed.
Low-battery alarm
When the battery voltage drops, it must be replaced. At first "low-battery" will flash, but as
soon as it is displayed continuously, the battery MUST be replaced shortly after!
Only original batteries supplied by the manufacturer may be used, else the guarantee and
liability will be terminated. The remaining lifetime after the first moment of indication is
generally several days up to some weeks.
Fig. 4: Example of low-battery alarm.
Range error
As soon as the input value is outside the calibrated PT100 measurement range (standard
range -100°C - +200°C or extended range type ZV: -200° - +800°C), “RANGE ERROR” will be
displayed.
Alarm 01-03
When "ALARM" is displayed, press the SELECT key to display the reason of the alarm: 1-3.
Please consult Appendix B: problem solving.

HF040TEN_v0402_03 Atex_IECEx_CSA_FM
Page 8
3. CONFIGURATION
3.1. INTRODUCTION
This and the following chapters are exclusively meant for electricians and non-operators. In these,
an extensive description of all software settings and hardware connections are provided.
Mounting, electrical installation, start-up and maintenance of the instrument may only be
carried out by trained personnel authorized by the operator of the facility. Personnel must read
and understand this Operating Manual before carrying out its instructions.
The F040-T may only be operated by personnel who are authorized and trained by the
operator of the facility. All instructions in this manual are to be observed.
Ensure that the measuring system is correctly wired up according to the wiring diagrams. The
housing may only be opened by trained personnel.
Take careful notice of the " Safety rules, instructions and precautionary measures " in the front
of this manual.
3.2. PROGRAMMING SETUP-LEVEL
3.2.1. GENERAL
Configuration of the F040-T is done at SETUP-level. SETUP-level is reached by pressing the
PROG/ENTER key for 7 seconds; at which time, both arrows will be displayed. In order to return
to the operator level, PROG will have to be pressed for three seconds. Alternatively, if no keys are
pressed for 2 minutes, the unit will exit SETUP automatically.
SETUP can be reached at all times while the F040-T remains fully operational.
Note: A pass code may be required to enter SETUP. Without this pass code access to SETUP is
denied.
To enter SETUP-level:

HF040TEN_v0402_03 Atex_IECEx_CSA_FM
Page 9
Matrix structure SETUP-level:
SCROLLING THROUGH SETUP-LEVEL
Selection of function-group and function:
SETUP is divided into several function groups and functions.
Each function has a unique number, which is displayed below the word "SETUP" at the bottom of
the display. The number is a combination of two figures. The first figure indicates the function-group
and the second figure the sub-function. Additionally, each function is expressed with a keyword.
After selecting a sub-function, the next main function is selected by scrolling through all "active" sub-
functions (e.g. 1, 11, 12, 13, 14, 1, 2, 3, 31 etc.). The “CLEAR” button can be used
to jump a step back if you missed the desired function.

HF040TEN_v0402_03 Atex_IECEx_CSA_FM
Page 10
To change or select a value:
To change a value, use to select the digits and to increase that value.
If the new value is invalid, the increase signor decrease-signwill be displayed while you are
programming.
To select a setting, is used to select in one direction and can be used to select in the other
direction.
When data is altered but ENTER is not pressed, then the alteration can still be cancelled by waiting
for 20 seconds or by pressing ENTER for three seconds: the PROG-procedure will be left
automatically and the former value reinstated.
Note: alterations will only be set after ENTER has been pressed!
To return to OPERATOR-level:
In order to return to the operator level, PROG will have to be pressed for three seconds. Also, when
no keys are pressed for 2 minutes, SETUP will be left automatically.

HF040TEN_v0402_03 Atex_IECEx_CSA_FM
Page 11
3.2.2. OVERVIEW FUNCTIONS SETUP LEVEL
SETUP FUNCTIONS AND VARIABLES
1 TEMPERATURE
11 UNIT °C - °F - K
12 OFFSET -999.9 to +999.9 unit
2 DISPLAY
21 BACKLIGHT (optional) off - green - amber
22 BL. BRIGHTNESS 1 - 5
3 POWER MANAGEMENT
31 LCD UPDATE fast - 1 sec - 3 sec - 15 sec - off
32 BATTERY MODE operational - shelf
4 SENSOR
41 NR OF WIRES 2 - 3 - 4
42 FILTER 0 - 99
5 OTHERS
51 TYPE / MODEL F040-T
52 SOFTWARE VERSION 03.xx.xx
53 SERIAL NO. xxxxxxx
54 PASS CODE 0000 - 9999
55 TAGNUMBER 0000000 - 9999999
3.2.3. EXPLANATION OF SETUP-FUNCTIONS
1 - TEMPERATURE
MEASUREMENT UNIT
11 SETUP - 11 determines the measurement unit for the displayed
temperature. The following units can be selected:
°C - °F - K.
Alteration of the measurement unit will have consequences for operator
and SETUP-level values.
Please note that the Span has to be adapted as well; the calculation is not
done automatically.
OFF SET
12 In case of a related temperature measurement, it might be required to add
a certain temperature to the really measured temperature.
The minus for a negative temperature can selected by pressing the
center and right button simultaneously.
2 - DISPLAY
The functions below will only effect the optional LED-backlight.
BACKLIGHT
(OPTION)
21
If a LED backlight has been supplied, the color can be selected.
Following selections are available:
OFF - GREEN - AMBER
BRIGHTNESS
(OPTION)
22
The density of the backlight can be set in following range:
1-5
One is minimum and five is maximum brightness.

HF040TEN_v0402_03 Atex_IECEx_CSA_FM
Page 12
3 - POWER MANAGEMENT
When used with the internal battery option, the user can expect reliable measurement over a long
period of time. The F040-T has several smart power management functions to extend the battery life
time significantly. Two of these functions can be set:
LCD NEW
31 The calculation of the display-information influences the power
consumption significantly. When the application does not require a fast
display update, it is strongly advised to select a slow refresh rate.
Please understand that NO information will be lost; the input signal will be
processed and the output signal will be generated in the normal way.
The following can be selected:
Fast - 1 sec - 3 sec - 15 sec - off.
Example battery life-time:
battery life-time with a FAST update: about 3 years.
battery life-time with a 1 sec update: about 5 years.
Note: after a button has been pressed by the operator - the display
refresh rate will always switch to FAST for 30 seconds. When "OFF" is
selected, the display will be switched off after 30 seconds and will be
switched on as soon as a button has been pressed.
BATTERY-MODE
32 The unit has two modes: operational or shelf.
After "shelf" has been selected, the unit can be stored for several years; it
will not process the sensor signal; the display is switched off but all
settings are stored. In this mode, power consumption is extremely low.
To wake up the unit again, press the SELECT-key twice.
4 - SENSOR
NR. OF WIRES
41 The PT100 element used can have 2, 3 or 4 wires. Do select the
appropriate type.
FILTER
42 The output signal of a sensor does mirror the actual temperature. This
signal is measured several times a second by the F040-T. The value
measured is a "snap-shot" of the real temperature as it will be fluctuating.
With the help of this digital filter a stable and accurate reading can be
obtained while the filter temperature can be set to a desired value.
The filter principal is based on three input values: the filter temperature
(01-99), the last measured analog value and the last average value. The
higher the filter value, the longer the response time on a value change will
be. Below, several filter levels with there response times are indicated:
FILTER VALUE RESPONSE TIME ON STEP CHANGE OF ANALOG VALUE.
TIME IN SECONDS
50%INFLUENCE 75% INFLUENCE 90%INFLUENCE 99%INFLUENCE
01 filter disabled filter disabled filter disabled filter disabled
02 0.3 seconds 0.5 seconds 1.0 seconds 1.8 seconds
03 0.5 seconds 1.0 seconds 1.5 seconds 3 seconds
05 1.0 seconds 1.8 seconds 2.8 seconds 5.3 seconds
10 1.8 seconds 3.5 seconds 5.6 seconds 11 seconds
20 3.5 seconds 7.0 seconds 11 seconds 23 seconds
30 5.3 seconds 10 seconds 17 seconds 34 seconds
50 8.8 seconds 17 seconds 29 seconds 57 seconds
75 13 seconds 26 seconds 43 seconds 86 seconds
99 17 seconds 34 seconds 57 seconds 114 seconds

HF040TEN_v0402_03 Atex_IECEx_CSA_FM
Page 13
5 - OTHERS
TYPE OF MODEL
51 For support and maintenance it is important to have information about the
characteristics of the F040-T.
Your supplier will ask for this information in the case of a serious
breakdown or to assess the suitability of your model for upgrade
considerations.
VERSION SOFTWARE
52 For support and maintenance it is important to have information about the
characteristics of the F040-T.
Your supplier will ask for this information in the case of a serious
breakdown or to assess the suitability of your model for upgrade
considerations.
SERIAL NUMBER
53 For support and maintenance it is important to have information about the
characteristics of the F040-T.
Your supplier will ask for this information in the case of a serious
breakdown or to assess the suitability of your model for upgrade
considerations.
PASS CODE
54 All SETUP-values can be pass code protected.
This protection is disabled with value 0000 (zero).
Up to and including 4 digits can be programmed, for example 1234.
TAGNUMBER
55 For identification of the unit and communication purposes, a unique tag
number of maximum 7 digits can be entered.

HF040TEN_v0402_03 Atex_IECEx_CSA_FM
Page 14
4. INSTALLATION
4.1. GENERAL DIRECTIONS
Mounting, electrical installation, start-up and maintenance of this instrument may only be
carried out by trained personnel authorized by the operator of the facility. Personnel must read
and understand this Operating Manual before carrying out its instructions.
The F040-T may only be operated by personnel who are authorized and trained by the
operator of the facility. All instructions in this manual are to be observed.
Ensure that the measuring system is correctly wired up according to the wiring diagrams.
Protection against accidental contact is no longer assured when the housing cover is removed
or the panel cabinet has been opened (danger from electrical shock). The housing may only
be opened by trained personnel.
Take careful notice of the " Safety rules, instructions and precautionary measures " at the front
of this manual.
4.2. INSTALLATION / SURROUNDING CONDITIONS
Take the relevant IP classification of the casing into account (see manufactures plate). Even an IP67
(NEMA 4X) casing should NEVER be exposed to strongly varying (weather) conditions.
When panel-mounted, the unit is IP65 (NEMA 4)!
When used in very cold surroundings or varying climatic conditions, take the necessary precautions
against moisture by placing a dry sachet of silica gel, for example, inside the instrument case.
Mount the F040-T on a solid structure to avoid vibrations.

HF040TEN_v0402_03 Atex_IECEx_CSA_FM
Page 15
4.3. DIMENSIONS- ENCLOSURE
Aluminum enclosures:
75 mm (2.95")
130 mm (5.12") 112 mm (4.40")
60 mm (2.36")
120 mm (4.72")
M20 x 1,5
PG9 PG9
30mm 30mm
22,5mm
M20 x 1,5
M16 x 1,5 M16 x 1,5
30mm 30mm
22,50mm
M20 x 1,5
22,5mm
M20 x 1,5 M20 x 1,5
25mm 25mm
22,5mm
1/2"NPT
0.9"
3x 1/2"NPT
0.12" 0.12"
0.9"
HA
HM
HN
HO
HP
HT
HU
6 x M12
12mm 12mm
24mm24mm 36mm
36mm
14mm 17mm
115 mm (4.53”)
98 mm (3.86”)
HB
29.1 mm (1.15”)
31 mm
(1.22”)
HZ
4x M20 x 1,5
15 15
15
HV
2323
16
mm
Fig. 6: Dimensions Aluminum enclosures.

HF040TEN_v0402_03 Atex_IECEx_CSA_FM
Page 16
GRP enclosures:
75 mm (2.95")
130 mm (5.12") 112 mm (4.40")
60 mm (2.36")
120 mm (4.72")
HD
HK
HK back box:
(flat bottom)
HE
HF
HG
HH
D=12mm
12mm12mm
24mm24mm 36mm
36mm
14mm 17mm
22,5mm
30mm 30mm
D=16mm
D=20mm
0.9"
D=22mm (0.866")
22,5mm
25mm 25mm
D=20mm D=20mm
D=16mm
HC
75 mm (2.95") 118 mm (4.65”)
104 mm (4.09”)
HJ
0.9”
0.12” 0.12”
3x D=22mm (0.866”)
115 mm (4.53”)
98 mm (3.86”)
29.1 mm (1.15”)
31 mm
(1.22”)
Fig. 7: Dimensions GRP enclosures.

HF040TEN_v0402_03 Atex_IECEx_CSA_FM
Page 17
4.4. INSTALLING THE HARDWARE
4.4.1. INTRODUCTION

Electro static discharge does inflict irreparable damage to electronics! Before installing or
opening the unit, the installer has to discharge himself by touching a well-grounded object.

This unit must be installed in accordance with the EMC guidelines (Electro Magnetic
Compatibility).

Do ground the aluminum casing properly as indicated, if the F040-T has been supplied with
the 115-230V AC power-supply type PM. The green / yellow wire between the back-casing
and removable terminal-block may never be removed.
Fig. 7: Grounding aluminum enclosure with option PM 115-230V AC.
FOR INSTALLATION, PAY EMPHATIC ATTENTION TO:
Separate cable glands with effective IP67 (NEMA4X) seals for all wires.
Unused cable entries: ensure that you fit IP67 (NEMA4X) plugs to maintain rating.
A reliable ground connection for both the sensor, and if applicable, for the metal casing. (above)
An effective screened cable for the input signal, and grounding of it’s screen to the “┴“ terminal
or at the sensor itself, whichever is appropriate to the application.

HF040TEN_v0402_03 Atex_IECEx_CSA_FM
Page 18
4.4.2. TERMINAL CONNECTORS WITH POWER SUPPLY - TYPE : PB / PX
For Intrinsically Safe applications: read chapter 5.
The following terminal connectors are available:
Fig. 8: Overview of terminal connectors F040-T-(PB / PX) and options.
REMARKS: TERMINAL CONNECTORS:
Terminals 1-4; Sensor input type T – PT100:
See drawing above for the proper connection of a 2, 3 or 4 wire PT100 sensor. The sensor signal
which will be processed once per second with a 16 bits accuracy.
Terminal 5-6: POWER SUPPLY UNIT - TYPE PX:
To power the unit an internal battery can be used (type PB) and / or an external DC power supply
of 8-30V DC (type PX).
Connect the "-" to terminal 5 and the "+" to terminal 6. When power is applied to these terminals, the
optional internal battery will be disabled / enabled automatically to extend the battery life time.
Terminal 9-10: power supply backlight - type ZB (option):
To power the backlight, a voltage in the range 20-30V DC has to be connected.
Maximum current 30mA. Connect the "-" to terminal 9 and the "+" to terminal 10.
5
POWER SUPPL
Y
UNIT
TYPE: PX
6
12
SENSOR SIGNAL
TYPE T: PT100
+
10
POWER SUPPLY
BACKLIGHT
OPTION: ZB
+
493
PT100 - 2 WIRE
PT100 - 3 WIRE
PT100 - 4 WIRE

HF040TEN_v0402_03 Atex_IECEx_CSA_FM
Page 19
4.4.3. TERMINAL CONNECTORS WITH POWER SUPPLY - TYPE : PF / PM
For Intrinsically Safe applications: read chapter 5.
The following terminal connectors are available:
GND 1
POWER SUPPLY
TYPE:
PF / PM
NL1
2
SENSOR SIGNAL
TYPE: T
PT100
6
57
PT100 - 2 WIRE
PT100 - 3 WIRE
PT100 - 4 WIRE
4
3
Fig. 9: Overview of terminal connectors F040-T-(PF / PM) and options.
REMARKS: TERMINAL CONNECTORS:
Terminal GND- 01- 02; POWER SUPPLY only available with type PF / PM:
OPTION SENSOR SUPPLY Terminal
GND 01 02
PF 24V AC ±10% Not required AC AC
PF 24V DC ±10% Not required L- L+
PM 115-230V AC ±10% Not required EARTH AC AC
Terminals 3-7; Sensor input type T – PT100:
See drawing above for the proper connection of a 2, 3 or 4 wire PT100 sensor. The sensor signal
which will be processed once per second with a 16 bits accuracy.

HF040TEN_v0402_03 Atex_IECEx_CSA_FM
Page 20
5. INTRINSICALLY SAFE APPLICATIONS
5.1. GENERAL INFORMATION AND INSTRUCTIONS:
Mounting, electrical installation, start-up and maintenance of this device may only be carried
out by trained personnel authorized by the operator of the facility. Personnel must read and
understand this Operating Manual before carrying out its instructions.
This device may only be operated by personnel who are authorized and trained by the
operator of the facility. All instructions in this manual are to be observed.
Ensure that the measuring system is correctly wired up according to the wiring diagrams.
Protection against accidental contact is no longer assured when the housing cover is removed
or the cabinet has been opened (danger of electric shock). The housing may only be opened
by trained personnel.
Take careful notice of the " Safety rules, instructions and precautionary measures " in the front
of this manual.
Safety Instructions
Certificates, safety values, control drawing and declaration of compliance can be found in the
document named: “Fluidwell F0..-T-XI - Documentation for Intrinsic Safety”.
For installation under ATEX directive: this intrinsically safe device must be installed in
accordance with the Atex directive 94/9/EC and the product certificate KEMA 05ATEX1168 X.
For installation under IECEx scheme: this intrinsically safe device must be installed in
accordance the product certificate IECEx KEM 08.0006X.
For installation under CSA: this intrinsically safe device must be installed in accordance the
product certificate CSA.08.2059461 X.
For installation under FM: this intrinsically safe device must be installed in accordance with the
Certificate / Project ID: 3033306.
The control drawing number FWCD-0005 can be found in the document named: “Fluidwell
F0..-T-XI - Documentation for Intrinsic Safety”.
Exchange of Intrinsically Safe battery FWLiBAT-00x with certificate number
KEMA 03ATEX1071 U or IECEx KEM 08.0005U is allowed in Hazardous Area.
See paragraph 5.4. for battery replacement instructions.
Please note
Special conditions for safe use mentioned in both the certificate and the installation
instructions must be observed for the connection of power to both input and / or output circuits.
When installing this device in hazardous areas, the wiring and installation must comply with
the appropriate installation standards for your industry.
Study the following pages with wiring diagrams per classification.
Serial number and year of production
This information can be looked-up on the display:
setup function (par. 3.2.2.).
Fig. 10: Example serial number.
YEAR NUMBER
WEEK