Flying Gadgets Wifi Jeep Camera User manual

Our FG Toys Spy car is wifi controlled, all of the controls are digitally
proportional. It also has a 300,000 pixel camera built in. You can move the car
forwards/backwards and left/right. You can get realtime video beamed directly to
your wifi device, giving you the option to take photos and video recordings. It
uses wifi signals to control the car making it free from interference from other
devices. Please read this instruction manual carefully, and retain for future use.
Happy driving!
Installing the batteries:
Remove the battery cover on the bottom of the car. Plug in the battery. Then
replace the plate and screw (Picture 1).
Battery charging:
Remove the battery cover and unplug the battery. Connect the battery to the AC
wall charger (picture 2). Charging takes 4 hours. Make sure to disconnect the
battery from the AC wall charger when charge is complete. Then replace the
battery and cover.
Switch the car ON (picture 3). Start your wifi device and search for a wifi
hotspot relating to the car (every cars wifi hospot is different). Then connect to
it (see picture 4)
WIFI JEEP
CAMERA
ITEM NUMBER : GEA6801

Download the APP “i-scope” from the App store or Android marketplace, and
install it (picture 5).
Open “i-scope” and choose R/C car from the menu (picture 6 and 7).

When you make a small movement of any control sticks the car will make small
proportional movement.
When you make a large movement of the stick the car will make a larger
proportional movement.
Throttle stick and steering control:
When you push the
throttle stick the car
moves forward.
Push the throttle
stick and slide
your thumb to the
left at the same
time, the car will
move forward and
turn left.
Push the throttle stick
down and slide your
thumb to the left at
the same time, the car
will move backwards
and turn left.
When you push the
throttle stick down the
car moves backwards.
Push the throttle stick
up and slide your thumb
to the right at the same
time, the car will move
forwards and turn to the
right.
Push the throttle stick
down and slide your thumb
to the right at the same
time, the car will move
backwards and turn to the
right.

Press the “G-sensor” button, and you will be able to tilt your wifi control device in the
direction you want the car to go. The controls are also proportional to the amount
you move it (see instructions below).
The camera switch on the App controller is for making the camera come out and go
back in to the front of the car. When you press the camera switch button and slide
your thumb up the camera will come out the front of the car. When you slide your
finger down it will go back in to the car.
The camera trimmer buttons are for controlling the angle of the camera with a
maximum of 90 degrees. Press the “camera up trimmer” you can control the camera
angle up and press “camera down trimmer” you can control the angle of the camera
down.
This product contains small parts that can be a choking hazard to small children.
Please keep this product out of small childrens reach.
For parts or advice:
[e-mail]
0208 952 0471