Kids Car Sales Mercedes-AMG G63 User manual

Mercedes-AMG G63
OWNER’S MANUAL
Pictures for
reference only
●Please read this
manual carefully
before use
●Non-means of transport are not allowed to drive on the road
●The manual contains important information, please keep it safe for future reference.
●In order to improve the product and improve the quality, we may change parts of the product
structure, appearance, packaging, and assembly methods without notice. When there is a
difference between the specification and the object, please take the physical object as the
standard, please understand!
 About product 1
Thank you for buying children's electric vehicle licensed by the Mercedes Benz brand !
One of the most important things to do before use is to read this product manual carefully, which can tell
you the details of the installation program and the correct method of use. It can also guide you to avoid improper
operation to damage the product or hurt the rider. It's especially important that it tells you a lot about security
considerations. Please memorize these contents and guide your child to use them. Please keep this instruction in
good hands and keep it in easy access.
" Mercedes Benz" The design of the product are protected by
Daimler's intellectual property rights, Our company is
authorized to use these trademarks.

Parameter specification:
Battery  12V4.5Ah*1 OR 12V7Ah*1
Charger   12V700mA OR 12V1000mA
Applicable age: 36-95 months
Load limit： Less than 30 kg
Speed : Single drive 3.5 km / h Double drive 3.5-5.5 km / h
Dimension: 1200X75X670mm
Power supply mode: Charging type
Charging interval: 8--12 hour
Battery life： About 300 recharges
Product name： Electric car
Part
number
Part name
Number
Standby note
1

car body
1
2

windshield
1
3

support
1
4

seat
1
belt with safety belt
5

steering wheel
1
Screw rod with 5X40mm original
machine
6

reflector
2
“ L”X1 “R”X1
7
wheel
4
8
wheel cap
4
Stuck on a wheel
9
escape-pipe
2
“ L”X1 “R”X1
10
hold-all
1
11
Plastic wrench
2

12
charger
1
13
ejector
1
14
MP3 line
1
L=200mm
15
toolbox
1
16
Instructions
1
17
Ø4X12mm screw
10
  Parts list 2

Exploded view 3

   Prior to installation 4
Warning ！
●It contains fine parts and is not suitable for children under 36 months.
●The product may contain a potentially dangerous sharp edge or sharp tip prior to assembly,
so this product must be assembled from the adult!
●Please put the packing bag in time to avoid the suffocation due to the play of the baby! After
the assembly is complete, take all the tools and the spare parts to be properly stored, and
do not let the children touch!
●Please check the number of all components before installation. Please handle the packing
plastic bag and protective film of the product. It is forbidden for children to play and have
the risk of suffocation.
●Before charging, check whether the wire, plug, housing and other parts of the charger are
damaged. If any damage is found, stop using it until the repair is in good condition.
Screwdriver
[self-contained] Tip forceps [self-contained] plastic wrenches
Battery Safety Warning
●The non-rechargeable battery can not be charged;
●the rechargeable battery can only be charged under the supervision of the adult;
●Rechargeable batteries should be removed from toys before charging;
●Different types of batteries or new and old batteries can not be mixed;
●Batteries should be placed with correct polarity;
●The exhausted battery should be removed from the toy;
●The power terminal shall not be short-circuited;
●The product does not provide dry battery;
 Installing front axle ＆ front wheel  5

Install the front axle: put the flat iron suit on the bogie first,
distinguish the front and back of the steering shaft, do not reverse, insert it on
the bracket, and secure it with a pair of oft 8 gaskets and M8 nuts; [make sure
the steering rod is inserted in the swivel hole on the front shaft]
Install front wheel: the center of the front wheel is aligned with the
front axle and can be pressed under a slight pressure. [the wheel is
mounted with one key]
[the same method for
installing the left and
right front wheels]
Install escape-pipe
＆rear axle ＆rear
wheel 6
Install the exhaust  
pipe: to distinguish the left and
right of the exhaust pipe, the card is
set on the vehicle body, and the one
side is fixed with 2pcs 4 X 12mm   
black flat head screws.

Rear axle and rear wheel    
installation: as shown in the
figure, the rear axle base is fixed on
the vehicle body with 8pcs Ø4 X12    
mm screws; then the drive motor is
installed, and the wheel is slightly
applied to the rear axle with a slight
force;[The wheel is one-key   
installation][the right and left rear wheel installation method is the same]


 

  Install seat and rear wing  7

Install the rear wing: align the card
slot on the vehicle body, press down the
tail, and get stuck.

Install the seat: first plug the card
post at the rear end of the seat on the
vehicle body, and then fix with 2pcs Ø
4X12mm self-tapping screw.[Remarks: Connect the plug-in plug-in in the battery room
before installing the seat, and turn on the power supply; see the connection power supply
11 for details.]
Installation
Toolbox  8

Install Toolbox: place the Toolbox on the body and secure it with 2pcsØ 4X12mm
black screws;

 Mounting steering wheel 9
Install the steering wheel:[As shown]
Connect the plug-in before installing the steering
wheel, then install the steering wheel (slightly use
the point force), and then fix the steering wheel
with the screw of the original machineØ5X40mm
and the M5 nut.[Remarks: before the steering
wheel is installed, the front and rear of the
steering wheel shall be distinguished from
reverse installation]


 

Installation of windshield and reflector  10
Install the windshield: align
the card hole on the vehicle body,
and put the windscreen card on the
vehicle body by force; (Remarks:
Make sure the card foot of the
windscreen is fully clamped on the
vehicle body)
Install reflector: insert reflector in
car body hole with a little effort.
(Note: distinguish reflector from right
side before installation)
 