Focal CMS 50 - User manual

CMS 50
Professional analog
monitoring speaker
Tweeter power unit:
50W rms / 19V/ms slew rate
Reproduction of the slightest details
Al-Mg inverted dome tweeter
Width, depth and accuracy
of the soundstage
Woofer amplification unit:
80W rms / 0.005% THD
Sound transparency and power in
the midrange/bass register
Aluminum cabinet optimized
for maximum rigidity and
damping
Acoustically transparent cabinet,
compact monitor
Polyglass cone
Neutral sound, no coloration
Fixing plates compatible with K&M® and
Omnimount® fixing kits
Numerous integration possibilities
(fixing on stand, ceiling, wall, structure...)
Numerous available settings
(Parametric filter, high-pass filters,
bass level, treble level...)
Optimum acoustic integration
Supplied accessories
1 decoupling table stand
4 rubber feet
2 height adjustable feet
1 phase optimization plug (tweeter)
2 removable grilles (tweeter and woofer)
Optional fixing accessories
Description Brand Reference
Stand (373/8-565/16"/950-1430mm) K&M 26740
Table stand (microphone stand 14-22
13/16"/355-580mm) K&M 23300
Wall fixing (rotating / distance from wall 41/8"-105mm) K&M 24180
Wall fixing (adjustable / rotating) OMNIMOUNT 20.5 WA
Wall fixing (adjustable / rotating) OMNIMOUNT 20.5 CA
Wall fixing (adjustable / rotating) OMNIMOUNT 20.5 ST
Structure fixing (to use with OMNIMOUNT Ballshaft 20.5 fixing kits) OMNIMOUNT 20.5C CLAMP
Focal® is a trademark of Focal-JMlab® - www.focalprofessional.com
BP 374 - 108, rue de l'Avenir - 42353 La Talaudière cedex - France - Tel. [phone] - Fax [phone]

Focal® is a trademark of Focal-JMlab® - www.focalprofessional.com
Due to constant technological advances, Focal-JMlab reserves its right to modify technical specifications without notice. Images may not exactly conform to specific
product. SCAuB-080430/1
Technical specifications
System
• Frequency response (+/- 3dB) 55Hz - 28kHz
• Maximum SPL 107dB SPL (peak @ 1m)
Electronic section
• Input - Type/Impedance
- Connectors
20 kOhms balanced/ 47 kOhms unbalanced
XLR / RCA
• Midrange and
low frequencies amplier
• High-frequency amplier
80W rms, class AB
50W rms, class AB
• Power supply - Voltage
- Connection
220-230V (1.6A fuse)
120V (3.15A fuse)
100V (4A fuse)
IEC inlet and detachable power cord
• Settings - Sensitivity
- Sound level
- High-pass lter
- Midrange/bass level
(0 - 450Hz)
- Treble level
(4,5 kHz - 20 kHz)
- 160Hz Parametric lter
(Q factor= 2)
- On/Off power supply
- Standby / on
Adjustable, +4dBu / 0 / -10dBV
Adjustable, -66dB / 0dB
Adjustable, idle / 45 / 60 / 90Hz (12dB / oct.)
Adjustable, 0 / -4 / -2 / +2dB
Adjustable, 0 / -4 / -2 / +2dB
Adjustable, 0 / -2 / -4 / -6dB
On/Off switch, voltage selector
Standby/on switch
• Visualization and controls On/Off LED
Standby and On LED
Audio clip LED
Transducers
• Woofer 5" (13cm) Focal, Polyglass cone
• Tweeter Aluminum/magnesium Focal inverted dome
• Shielding Complete by cancellation magnet
Cabinet
• Construction Reinforced and damped aluminum
• Finish Black powdered paint
• Dimensions with rubber feet (HxLxD)
• Dimensions with decoupling table stand (HxLxD)
113/8 x 71/2 x 715/16" (289.5 x 190 x 201mm)
113/4 x 71/2 x 715/16" (299.5 x 190 x 201mm)
• Weight 17lb (7.7kg)
CMS 50
Professional analog
monitoring speaker