Folded Space Valeria FS-GAVAL User manual

FS-GAVAL
FS-GAVAL Insert compatible with
Guild Academies of Valeria®
Assembly Instructions
The package contains four single sheets.
After assembly the trays are put in up to three layers in the original game box.
Ordinary PVA glue is required when assembling each tray.
Please make sure you dry-assemble each tray correctly before gluing it together.
Please check www.foldedspace.com for general assembly tips.
Page 1 of 2
Tray 1
Tray 2a-d
Tray 3a-d
Step 1 Finished tray
Step 1 Finished tray
Step 2
Step 1 Finished trayStep 2
Tray 4
Step 1
Finished tray
Step 2
Sheet 1 Sheet 2 Sheet 3 Sheet 4
Sheet 4
Sheet 1 Sheet 3
Sheet 1 Sheet 2 Sheet 4
Sheet 4
(the trays are identical)
(the trays are identical)

Page 2 of 2
Tip: Keep the instructions in the bottom of your board game box as a reminder of how the insert ts together.
Please check www.foldedspace.com
for photos of this insert in use.
FS-GAVAL
FS-GAVAL Insert compatible with
Guild Academies of Valeria®
Tray 1
Tray 6
Tray 5
Step 1 Finished trayStep 2
Game bags Tray 6
Sheet 2 Sheet 3
Sheet 3
Trays 3a-d
Tray 5
Step 1
Finished tray
Step 2
Step 3 Step 4
Tray legend
Tray 1 - dice and professor draw bags
Tray 2a, b, c, d - player pieces
Tray 3a, b - guild classroom tiles
Tray 3c - town classroom tiles
Tray 3d - prestige tiles
Tray 4 - favour and monument chits
Tray 5 - student dice and professor, rst player, & round
tracker tokens
Tray 6 - player aid tiles and cards
Note: Tray 1 has enough space to store the full bags, and
Tray 5 has enough space to store all the dice and
professors. Decide depending on your normal player
count how to use the two trays best for you.
Tray 4
(the tray is higher on one side, make sure the long walls are correctly orientated)
= player aid print
= solo mode card back print
= quest card back print
The wall print design order should
be as follows:
Tray 2a, b, c, d
player aids
solo mode cards
quest cards