Food Network 840166500 User manual

READ BEFORE USE
Important Safeguards.............................. 2
Parts & Features ...................................... 3
Attachments.......................................... -5
Using Your Mixer .................................... 5
Cleaning .................................................. 6
Customer Service .................................... 8
10-speed
hand mixer
840166500
840166500 ENv04.qxd 7/27/07 10:53 AM Page 1

2
IMPORTANT SAFEGUARDS
1. Read all instructions.
2. To reduce the risk of electrical
shock, do not put cord, plug, or
Mixer body in water or other li uid.
3. Close supervision is necessary
when any appliance is used by
or near children.
4. Unplug from outlet when not in
use, before putting on or taking
off parts, and before cleaning.
5. Avoid contacting moving parts.
Keep hands, hair, and clothing, as
well as spatulas and other uten-
sils, away from beaters during
operation to reduce risk of injury
to persons, and/or damage
to Mixer.
6. Remove beaters from Mixer
before washing.
7. Do not operate any appliance with
a damaged cord or plug, or after
the appliance malfunctions or is
dropped or damaged in any man-
ner. Call our toll-free customer
service number for information on
examination, repair or electrical or
mechanical adjustment.
SAVE THESE INSTRUCTIONS
Other Co sumer Safety I formatio
This applia ce is i te ded for
household
use o ly.
WARNING! Shock Hazard:
This appliance has a polarized plug
(one blade is wider than the other).
To reduce the risk of electric shock,
this plug is intended to fit into a
polarized outlet only one way. If the
plug does not fit fully into the outlet,
reverse the plug. If it still does not
fit, contact a ualified electrician. Do
not attempt to modify the plug in
any way.
8. The use of attachments not
recommended or sold by the
appliance manufacturer for use
with this model may cause fire,
electric shock or injury.
9. Do not use outdoors.
10. Do not let cord hang over edge
of table or counter. Do not let
cord contact hot surfaces,
including stove.
11. Do not place on or near a hot
gas or electric burner, or in a
heated oven.
12. Check that control is off before
plugging cord into wall outlet.
To disconnect, turn control to
OFF, then remove plug from wall
outlet.
13. Do not use appliance for other
than intended purpose.
WARNING: To reduce risk of
pi chi g or crushi g fi gers,
always u plug Mixer before
i serti g or removi g beaters.
BEFORE FIRST USE: Wash
attachments in hot, soapy water.
Rinse and dry.
When using electric appliances, basic safety precautions should always be
followed, including the following:
840166500 ENv04.qxd 7/27/07 10:53 AM Page 2

3
Parts a d Features
I crease Speed
ON/OFF
Power Switch
Decrease Speed
Speed I dicator
Eject Trigger
Beaters
Timer
Bowl Rest
NOTE: The Timer will
count up in seconds
to 9:59 (9 minutes
and 59 seconds)
when turned on.
When the Mixer is
turned OFF, the
Timer will return to
zero.
Storage Case
840166500 ENv04.qxd 7/27/07 10:53 AM Page 3

4
DESCRIPTION
The flat beaters are designed for general
mixing purposes.
The si gle whisk is perfect for whipping
cream. The whisk may be inserted into
either opening.
The twisted wire beaters, which have no
center post for ease in cleaning, are
designed for mixing thick batters and
cookie dough.
Attachme ts
Before first use, wash attachments in hot, soapy water.
Rinse and dry.
To ensure safety, unplug Mixer from electrical outlet before
inserting or removing attachments.
ATTACHMENT
840166500 ENv04.qxd 7/27/07 10:53 AM Page 4

5
1. Make sure Mixer is unplugged
and Power Switch is set to
OFF.
2. Insert beaters or whisk. Plug
Mixer into outlet.
3. When ready to mix, slide
Power Switch to ON.
4.The Mixer will start and 1 will
be displayed on the Speed
Indicator. The Timer will start
to count up from 1 second
(0:01).
5. To increase the speed of the
Mixer, press the Increase
Speed ▲ button until desired
speed is reached.
Usi g Your Mixer
6.To decrease speed, press the
Decrease Speed ▼ button.
7. To turn Mixer off, slide Power
Switch to OFF and unplug
Mixer.
8. To eject beaters, pull up on
the Eject
Trigger.
Eject
Trigger
To I sert Attachme ts
Flat Beaters, Straight Wire
Beaters a d Whisk
1. Make sure Mixer is unplugged
and speed control is set to
OFF.
2. Insert a beater or attachment
into an
opening on
bottom of
Mixer. Push
until it clicks
into place.
Repeat with
other beater
or attach-
ment.
Twisted Wire Beaters
1. Insert the wire beater with
collar into
opening
indicated by
illustration
on Mixer.
2. Align tabs on beater with slots in
opening.
Push until it
clicks into
place.
Repeat with
other beater.
Collar
Tab Slot
840166500 ENv04.qxd 7/27/07 10:53 AM Page 5