for Living 068-3393-6 User manual

6-Tier Wire Shelving
Product No. 068-3393-6
Toll-free: 1-877-483-6759
IMPORTANT: Please read this manual carefully before beginning assembly
of this product. Keep this manual for future reference.
Assembly Instructions
2Product No. 068-3393-6
Part List
Shelf - 6
Top post - 4
Bottom post - 4
Tapered plastic sleeve- 48+2 extra
A
B
C
D
3Product No. 068-3393-6
Assembly
Step 1
Requires C,E,F,G,H
TOP
Screw wheels E and F or levelling feet Ginto the
bottom of each bottom post C. Tighten with wrench H.
4Product No. 068-3393-6
Step 2
Requires A,C,D
Attach a pairs of tapered plastic sleeves D around the bottom of
each bottom post C.Tapered plastic sleeves must be assembled
at the same height on each post. Slide shelf Aonto bottom posts
and push down towards the tapered plastic sleeves Dat bottom of posts.
5Product No. 068-3393-6
Step 3
Requires A,D
Attach another pair of tapered plastic sleeves Daround each
bottom post C. Slide shelf Aonto the tapered plastic sleeves D.
Locking wheel - 2
wheel - 2
Levelling foot - 4
Wrench - 1
E
F
G
H

6Product No. 068-3393-6
Assembly
Step 4
Requires B,C
Screw the top post B to bottom post C.
7Product No. 068-3393-6
Step 5
Requires A,D
Attach a pair of tapered plastic sleeves Daround each top post B.
Slide shelf A onto the tapered plastic sleeves D.
8Enjoy your furniture
Step 6
Requires A,D
Attach additional pairs of tapered plastic sleeves Daround the
posts. Slide additional shelves Aonto the tapered plastic sleeves D.
Caution:
Do not stand or climb on the shelves.
Place heavier items on the lower shelves and
lighter items on the top shelves.
Do not move the shelving unit when loaded.
Warning:
Total Maximum weight capacity of 400 lb (181.4 kg),
evenly distributed, when assembled with wheels.
Exceeding these load limits could cause sagging,
instability product collapse, and/or serious injury.
Imported for Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8
Warning! To reduce the risk of serious injury, read the following safety
instructions before assembling and using the product.
Caution! Always keep children under close supervision while they are using or
around this product. Never leave children unattended.
Made in China

There is one set of tipping restraint hardware included with this shelving unit. When properly installed,
Thank you for your purchase.
of the hardware bag. Please carefully read and follow these instructions to
correctly install the tipping restraints.
“KEEP THESE INSTRUCTIONS FOR FURTHER REFERENCE”
Your assembly should now be complete.
Full instructions for the installation of the tipping restraint hardware are printed on the back
9Product No. 068-3393-6
Assembly
TIPPING RESTRAINT HARDWARE
this restraint can help limit the risk of unexpected tipping of the unit. It is strongly recommended that
this hardware is installed properly to limit the possibility of tipping due to slight tremors or bumps.