Ergotron 97-760-009 User manual

888-97-297-G-01 rev.D • 11/16
1 of 7
ASSEMBLY INSTRUCTIONS
Instrucciones de instalación
Notice d’assemblage
Montageanleitungen
Installatie instructies
Manuali d’Istruzione
取扱い説明書
安装说明
설치 안내
Monitor Handle Kit
ABCDED
1
2
3
4
5
1x
M6 x 25mm
2x
M4 x 30mm
4x
M8 x 30mm
4x
M6 x 30mm
4x
M5 x 30mm
4x
M4 x 15mm
4x
M8 x 15mm
4x
M5 x 15mm
4x
M6 x 15mm
4x
2x
1x
ID: 5.2 mm
OD: 13 mm
THK: 2.5 mm
4x
ID: 8.5 mm
OD: 18 mm
THK: 2.5 mm
4x
ID: 6.5 mm
OD: 12 mm
THK: 1 mm
2x
1x
M6-M8 x 10mm
4x
M6-M8 x 5mm
4x
7mm
4x
M4 x 10mm
4x
M4
4 mm
User's Guide - English
Guía del usuario - Español
Manuel de l’utilisateur - Français
Gebruikersgids - Nederlands
Benutzerhandbuch - Deutsch
Guida per l’utente - Italiano
Användarhandbok - svenska
ユーザーガイド: 日本語
用户指南 : 汉语
www.ergotron.com
EN
IMPORTANT! This product adds an additional 2.9 lbs. (1.3 kg) to your mounting solution. Your mounting solution's
monitor weight capacity must be reduced by 2.9 lbs. (1.3 kg) when using standard monitors less than or equal to
2.5" (64 mm) thick. Additional reduction will be required if monitors are greater than 2.5" (64 mm) thick.

888-97-297-G-01 rev.D • 11/16
2 of 7
1
50 mm
50 mm
100 mm
100 mm
100 mm
100 mm
200 mm
100 mm
A/B
C
D
E
4x 
3
4
5
6
50 mm
50 mm
100 mm
100 mm
7mm
4x
M4 x 10mm
4x
M4
EN
Top view of attachment.
Top view of attachment.
There are 5 ways to mount this product. Based on what mounting solution and display you are attaching this product to, follow the
appropriate mounting instructions.
A. Attach to mounting solution with 50 x 50 mm hole pattern and display with 100x100mm hole pattern.
B. Attach to mounting solution with 50 x 50 mm hole pattern and display with 200x100mm hole pattern.
C. Attach to mounting solution and display with 100 x 100 mm mounting hole pattern.
D. Attach to mounting solution and display with 200 x 100 mm mounting hole pattern.
E. Attach to mounting solution with 100 x 100 mm hole pattern and display with 200x100mm hole pattern.
Use the fasteners and tool supplied
with your mounting solution.

888-97-297-G-01 rev.D • 11/16
3 of 7
A/B
50 mm
50 mm
OR
OR OR
OR
OR
OR OR OR OR
OR OR
OR
100 mm
100 mm
200 mm
100 mm
M4 x 30mm
4x
M8 x 30mm
4x
M6 x 30mm
4x
M5 x 30mm
4x
M4 x 15mm
4x
M8 x 15mm
4x
M5 x 15mm
4x
M6 x 15mm
4x
ID: 5.2 mm
OD: 13 mm
THK: 2.5 mm
4x
ID: 8.5 mm
OD: 18 mm
THK: 2.5 mm
4x
M6-M8 x 10mm
4x
M6-M8 x 5mm
4x
2
7
3
EN
Top view of attachment.
WARNING! PLEASE SELECT THE PROPER SCREW LENGTH AND
WIDTH FOR YOUR FLAT PANEL BY HAND TIGHTENING TO
CHECK YOUR FLAT PANELS THREAD WIDTH AND DEPTH.

888-97-297-G-01 rev.D • 11/16
4 of 7
100 mm
100 mm
C
OR
OR OR
OR
OR
OR OR OR OR
OR OR
OR
100 mm
100 mm
M4 x 30mm
4x
M8 x 30mm
4x
M6 x 30mm
4x
M5 x 30mm
4x
M4 x 15mm
4x
M8 x 15mm
4x
M5 x 15mm
4x
M6 x 15mm
4x
ID: 5.2 mm
OD: 13 mm
THK: 2.5 mm
4x
ID: 8.5 mm
OD: 18 mm
THK: 2.5 mm
4x
M6-M8 x 10mm
4x
M6-M8 x 5mm
4x
2
7
3
EN
Top view of attachment.
WARNING! PLEASE SELECT THE PROPER SCREW LENGTH AND
WIDTH FOR YOUR FLAT PANEL BY HAND TIGHTENING TO
CHECK YOUR FLAT PANELS THREAD WIDTH AND DEPTH.

888-97-297-G-01 rev.D • 11/16
5 of 7
200 mm
100 mm
D
OR
OR OR
OR
OR
OR OR OR OR
OR OR
OR
200 mm
100 mm
M4 x 30mm
4x
M8 x 30mm
4x
M6 x 30mm
4x
M5 x 30mm
4x
M4 x 15mm
4x
M8 x 15mm
4x
M5 x 15mm
4x
M6 x 15mm
4x
ID: 5.2 mm
OD: 13 mm
THK: 2.5 mm
4x
ID: 8.5 mm
OD: 18 mm
THK: 2.5 mm
4x
M6-M8 x 10mm
4x
M6-M8 x 5mm
4x
2
7
3
EN
Top view of attachment.
WARNING! PLEASE SELECT THE PROPER SCREW LENGTH AND
WIDTH FOR YOUR FLAT PANEL BY HAND TIGHTENING TO
CHECK YOUR FLAT PANELS THREAD WIDTH AND DEPTH.

888-97-297-G-01 rev.D • 11/16
6 of 7
100 mm
100 mm
E
OR
OR OR
OR
OR
OR OR OR OR
OR OR
OR
200 mm
100 mm
2M4 x 30mm
4x
M8 x 30mm
4x
M6 x 30mm
4x
M5 x 30mm
4x
M4 x 15mm
4x
M8 x 15mm
4x
M5 x 15mm
4x
M6 x 15mm
4x
ID: 5.2 mm
OD: 13 mm
THK: 2.5 mm
4x
ID: 8.5 mm
OD: 18 mm
THK: 2.5 mm
4x
M6-M8 x 10mm
4x
M6-M8 x 5mm
4x
37
EN
Top view of attachment.
WARNING! PLEASE SELECT THE PROPER SCREW LENGTH AND
WIDTH FOR YOUR FLAT PANEL BY HAND TIGHTENING TO
CHECK YOUR FLAT PANELS THREAD WIDTH AND DEPTH.

888-97-297-G-01 rev.D • 11/16
7 of 7
4
3M6 x 25mm
2x
1x
ID: 6.5 mm
OD: 12 mm
THK: 1 mm
2x 4 mm
Adjustment · Ajuste · Réglage · Einstellung · Instellen · Regolazione · 調整 · · 조절
EN
Important! Adjust your mounting solution to handle the added weight.
You will need to adjust your product after installation is complete. Make sure all your equipment is properly
installed on the product before attempting adjustments. Your mounting solution should move smoothly and
easily through the full range of motion and stay where you set it. If movements are too easy or dicult or if
product does not stay in desired positions, follow the adjustment instructions that came with your mounting
solution to create smooth and easy movements. Depending on your product and the adjustment, it may take
many turns to notice a dierence. Any time equipment is added or removed from your moutning solution,
resulting in a change in the weight of the mounted load, you should repeat the adjustment steps to ensure safe
and optimum operation.