Force 5450R Specifications

Model 5450R
ID" (13 mm) Capacity Air Drill -
Reversible
Operator Instructions
Includes - Foreseen Use, Work Stations., Putting Into Service,
Opwrting, Dismantling. Assembly and Safety Rule*.
Sioux Tools, Inc.
117 Lei Drive
Murphy, NC 28906
U.S.A.
Tel No. 828-835-9765
Fax NO. 828-835-9685
Product Net Weight
3.30 Ibs
1.50 Kg
Recommended Use Of
Balancer Or Support
NO
Air Pressure
~ecom&nded~orking
6.2 bar
90 PSI
Maximum
6.2
bar 90 PSI
Safety rules when using a 1/2"
Capacity Air Drill
- Prolonged exposure to vibration may cause injury.
-Read all instructions before using this tool. All
operators must be fully trained in its use and aware of
these safety rules-
- Do not exceed the maximum working air pressure.
- Use personalprotectionequipment as recommended.
-Some dust created by power sanding, sawing, grintfmg,
drilling, and other construction activities contains
chemicals known to cause cancer, birth defects and other
reproductive harm.
-Use only compressed air at the recommended
conditions.
-If the tool appears to malfunction,
remove
from use immediately and ,
arrange for service and repair. If it is 1
Form # 2654
Date 12-01 /A
important
Read these instructions carefully before installing, operalinq.
servicing or repairtnq this tool- Keep these instructions in a safe
Product Type
l/29(13mrn)CapacityAir
Drill - Reversible
--
Recommended Hose Bore Recommended Max,
Size - Minimum
1
Hose Length
318 ins 10 mrn 30Ft 10M
Model No/Nos
Noise Level: Sound Pressure Level 90.0 dB(A)
Sound Power Level 1 00.0 dB(A)
605
^^m.
WPM
i
Serial No.
Test Method: Tested in accordance with Pneurop
test code PNBNTC1 and IS0 Standard 3744
c?
- -
Vibration Level
2.5 Meters / Sec"
Test Method: Tested in accordance with IS0
standards 8662 Parts 1 & 7
Never use the tool if there is any chance of coming into
. contact with live electricity.
- Always when using the tool, adopt a firm looting and/or
position and grip the tool sufficiently only to overcome
any reactionforces that may result from the toot doing
work- Do not overgrip.
-Use only correct spare parts for maintenance and
repair. Do not improvise or make temporary repairs.
Major servicing and repairs should only be carried out
by persons trained todo so.
- Do not lock, tape, wire, etc- the 'On/off' valve in 'On'
position. The triggerllever, etc- must always be free to
return to the 'Off' position when released.
- Always shut off the air supply to the tool and press the
'OnIOff' valve to exhaust the air from the feed hose
not practical to remove tool from
service, then shut off the air supply
to the tool and write or have written a
warning note and attach it to the tool.
- If tool is to be used with a balancer or
other suspension device, ensurethat
Easy To Reach And
Air Tool
OperateShutOftValw
the tool is firmly attached to the
suspension/support device.
-When operating the tool, always keep
the body and particularly the hands
away from the working attachment
fixed to the tool. Recommended Air Supply System Figure 1
-The tool is not electrically insulated.
Page No 1