Foremost Veranda Classics FG-BROSR User manual

1
Broadway Swivel Rocking Chair With Cast Seat
ITEM#:FG-BROSR
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
Customer Service
E-Mail : [email protected]
8:30a.m.–5:00p.m. EST, M-F
Toll Free 1-855-390-5474
Fax: [phone]
Website: www.foremostgroups.com

2
PART DESCRIPTION PICTURE QTY
A CHAIR SEAT 1
B CHAIR BASE 1
C BOLT (5/16”X45MM)
(Pre-attached)
4
D METAL PLATE( Pre-attached) 4
E FLAT WASHER (Pre-attached) 4
F LOCK WASHER (Pre-attached) 4
G NUT (Pre-attached) 4
H WRENCH 1
I BOLT CAP 4
J SEAT CUSHION 1
WARNING!
WEIGHT LIMIT: 250 LBS
Please read instructions carefully and thoroughly before assembling. Check parts against
the parts list to make sure you have all the parts needed for proper assembly. Familiarize yourself
with the inventory of parts and the accompanying illustrations to ensure safe and proper assembly.
Failure to tighten bolts may cause injury. Do not force components and over tighten the nuts during assembly.
Place chair on a non-abrasive flat surface to prevent scratching. Hang wet cushion over chair frame to dry to prevent mold/mildew.
PARTS LIST
Congratulations on the purchase of your patio set!

3
Figure 2
Remove all protective material carefully. Avoid cutting
the surface of the furniture while removing the packag-
ing material.
Remove the Bolt (C), Metal Plate (D), flat washers (E),
lock washers (F) and nuts (G) from the spring late for
chair seat (A).
Place the chair seat (A) on a non-abrasive flat surface.
Align the holes on the support bar on the underside of
the chair seat with the holes on the spring plates at-
tached to the t-rocker that is pre-attached to the chair
base (B). Make sure the arrow labels on the rocker
mechanism and chair support bar are facing the same
direction—towards the front of the chair. Insert bolts
(C) through the metal plates (D), support bar, spring
plate and the metal plates (D) as showed in the dia-
gram. Secure bolts with flat washers (E), lock washers
(F) and nuts (G). The support bar and spring plate
should be sandwiched in between the metal plates (D).
Warning: Improper assembly may result in serious
personal injury.
Once all the nuts and bolts are in place, securely
tighten all the bolts (C) and nuts (G), including the
ones at the front part on the rocker mechanism with
the wrench (H). Cover all bolts with bolts caps (I).
(FIGURE 1)
1
Spring plate
Place the seat cushion (J) on the rocking chair.
Test the swivel rocker gently. If the rocker does not rock
properly, double check the assembly procedure, espe-
cially step 1.
REPEAT ABOVE STEPS TO ASSEMBLE THE
OTHER ROCKING CHAIR.
(FIGURE 2)
Your chair is now ready for enjoyment.
2
B
A
J
Figure 1
I
Support

4
Broadway 42”x84” Dining Table
TEM#: FG-BROF8442TBL
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
Customer Service
E-Mail : [email protected]
8:30a.m.–5:00p.m. EST, M-F
Toll Free 1-855-390-5474
Fax: [phone]
Website: www.foremostgroups.com

5
PART DESCRIPTION PICTURE QTY
A TABLE TOP 1
B TABLE BASE 2
C CONNECTOR RING 1
D FLAT WASHER 10
E LOCK WASHER 10
F BOLT (1/4*20) 2
G BOLT (1/4*30) 8
H BOLT COVER 10
I HEX SCREW DRIVER 1
WARNING!
Please read instructions carefully and thoroughly before assembling. Check parts against
the parts list to make sure you have all the parts needed for proper assembly. Familiarize yourself
with the inventory of parts and the accompanying illustrations to ensure safe and proper assembly.
Failure to tighten bolts may cause injury. Do not force components or over tighten the nuts during assembly.
Place table on a non-abrasive flat surface to prevent scratching.
Congratulations on the purchase of your patio set!
PARTS LIST