Charging
When the battery level is low, connect the camera to the 5V charger or
computer using the microUSB cable. When the camera is turned off and begins
charging, the activity LED lamp will turn red. Once it’s fully charged, the LED will turn
off.
Camera operations
To turn the camera On, press and hold the On/Off button until the activity LED
turns blue.
To start video recording, shortly press the Mode button to go into the video
recording mode. In the top right corner, a video-recorded icon will appear. To start
recording press the Camera button and a red dot in the top part of the screen will
indicate that the camera start recording. To stop recording, press the Camera button
again.
To start taking pictures shortly press the Mode button to go into the camera
mode. In the top right corner, a camera icon will appear. To take a picture press the
Camera button.
To browse files, shortly press the Mode button to go into the browsing mode.
To go between the files, use the Up and Down buttons.
Shortly press the Menu Settings button to open the camera settings. To
navigate use the Up and Down buttons. To choose the desired function press the
Camera button. To exit the settings, shortly press the Menu Settings button again.
In order to take and save photos, you need an SD card of up to 32GB. The
camera doesn’t have built-in memory.