Fortinet FortiTester 2000E User manual

FortiTester
2000E
QuickStart Guide

June 1, 2019
20190601
© 2019 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®,
FortiCare® and FortiGuard®, and certain other marks are registered
trademarks of Fortinet, Inc., in the U.S. and other jurisdictions, and
other Fortinet names herein may also be registered and/or
common
law trademarks of Fortinet. All other product or company names may
be trademarks of their respective owners. Performance and other
metrics contained herein were attained in internal lab tests under ideal
conditions, and actual performance and other results may vary. Network
variables, different network environments and other conditions may
af fect
performance results. Nothing herein represents any binding commitment by
Fortinet, and Fortinet disclaims all warranties, whether express or implied,
except to the extent Fortinet enters a binding written contract, signed by
Fortinet’s General Counsel, with a purchaser that expressly warrants that
the identified product will perform according to certain expressly-identified
performance metrics and, in such event, only the specific performance
metrics expressly identified in such binding written contract shall be
binding on Fortinet. For absolute clarity, any such warranty will be limited
to performance in the same ideal conditions as in Fortinet’s internal lab
tests. In no event does Fortinet make any commitment related to futur
e
deliverables, features or development, and circumstances may change
such that any forward-looking statements herein are not accurate. Fortinet
disclaims in full any covenants, representations, and guarantees pursuant
hereto, whether express or implied. Fortinet reserves the right to change,
modify, transfer, or otherwise revisethis publication without notice, and the
most current version of the publication shall be applicable.

Register for Support
Register your Fortinet product to receive:
• Technical Support
• New product features
• Protection from new threats
Vous devez enregistrer le produit pour recevoir:
• Support technique
• Nouvelles fonctionnalitées du produit
• Protection contre de nouvelles menaces
La reistrazione ti permette di usufruire di:
• Supporto Tecnico
• Nuove funzionalita
• Proteezione dalle ultime minaccce
Debe registrar el producto para recibir:
• Apoyo técnico
• Nuevas funcionalidades del producto
• Protección contra ataques
https://support.fortinet.com
Toll free: 1 866 648 4638
Phone: [phone]
Fax: [phone]
Email: [e-mail]
登録のお願い 本日、フォーティネット製品の登録をしてくだ
さい。 登録すると次のメリットがあります。 テクニカルサ
ポート •新機能の追加 •新しい脅威への防御
请马上注册 您的飞塔产品 您在注册以后才能得到技术支持、新产
品特点信息、最新威胁防护

5滚滚长江东逝水
Box Includes
FortiTester 2000E
Quickstart Guide
2 Power cables
Ethernet cable
Console cable
5 Rubber feet
6M4 screws for slidingrails handles
2 M6 rack mount screws
2 Sliding rail handles
2 Sliding rails
FortiTester
2000E
QuickStart Guide
2 Sliding rails

6
1 Installation
Please read “Cautions and Warnings” prior to installing your device.
The appliance can be placed on any flat surface, or mounted in a standard 19 inch rack.
To install the appliance on a flat surface
1. Ensure that the surface onto which the appliance is to be installed is
clean, level, and stable and that there is at least 1.5in (3.8cm) of
clearance on all sides to allow for adequate airflow.
2. Attach the provided rubber feet to the bottom of the appliance.
3.
Place the appliance in the designated location.
4.
Verify that the spacing around the appliance conforms to requirements
and that the unit is level.
To install the FortiTester unit into a rack:
1. Ensure that the FortiTester unit is placed on a stable surface prior to
rack-mount installation.
2. Assemble the rails and install the system in the rack following the safety
instructions and the rack installation instructionsin Rail Installation (p.
6).
3. Verify that the spacing around the FortiTester unit conforms to
requirements and that the unit is level.
4. Connect the provided power cables tothe system.
5. Plug the other end of the power cables into separate power sources,
such as uninterruptible power supplies (UPS) or power distribution units
(PDU).
6. Insert one end of the provided Ethernet cable into one of the Ethernet
ports on the FortiTester unit. Insert the other end to a router or switch
that is connected tothe internet.
7. Press the power button on the system to turn on the device.
1.5in
1.5in

Do NOT place heavy objects on the unit.
2 Rail Installation
To install the FortiTester unit using the rail mounted kit:
1. To remove the chassis (inner) member, pull the slide open, and then
press the trigger down as shown on the drawing, and pull the chassis
(inner) member out.
2. Use the standos to mount the chassis (inner) member to the chassis.
3. To attach the cabinet (outer) member of the rail, first ensure that the
safety lock is in the unlocked position. Then, insert the stag into the
upper and lower square holes on the EIA rail from the back of the rail.
Finally, push the safety lock forward to secure the bracket.
Press trigger down to release
Pull chassis (inner) member out
7

4. To mount the chassis into the cabinet, first ensure that the ball retainer is
in the fully open position. Then, insert the chassis (inner) member into
the cabinet member. When you push the chassis back into the cabinet,
press the trigger down torelease the slide from the locked position.
Release safety lock
before mounting
Push the safety lock forward to secure
Retainer is in fully open position
Press trigger down to unlock slides
8

9
To install the transceivers
1. Ensure that you are properly grounded..
2. Remove the caps from the cage sockets on the front
panel of the unit..
3. Position the transceiver in front of the cage socket
opening and ensure that the transceiver is correctly
oriented.When the transceiver is correcectly oriented, the
extraction lever will be level with the socket latch.
Note: Cage socket orientation may vary. Ensure that the
transceiver module is correctly oriented each time that
you are inserting a transceiver.
Caution:
Transceivers are
static sensitive
devices. Use
an ESD wrist
strap or similar
grounding device
when handling
transceivers.
Do not install
or remove
transceivers while
fiber-optic cables
are still attached.
This can cause
damage to the
cables, cable
connectors,
and the optical
interfaces. It may
also prevent the
transceiver from
latching correctly
into the socket
connector.
Note: Installing
and removing
transceivers can
shorten their
useful life. Do not
install or remove
transceivers more
than is necessary. .
SFP+ Transceivers
SFP Cage Sockets
Socket Latch
Transmit Optical Bore
Extraction Lever
Receive Optical Bore

10
4. Hold the sides of the transceiver and slide it into the cage
socket until it clicks into place.
5. Press the transceiver firmly into the cage socket with
your thumb.
6. Verify that the transceiver is latched corrtectly by grasping
the sides of the transceiver and trying to pull it out
without lowering the extraction lever.
If the transceiver cannot be removed, it is installed and
latched correctly.
If the transceiver can be removed, reinser it and press
harder with your thumb.
If necessary, repeat this process until the transceiver is
securely latched into the cage socket..
To remove the transceivers
1. Ensure that you are properly grounded..
2. If applicable, disconnect thefiber-optic cable from the
transceiver connector and install a clean dust plug in the
transceiver’s optical bores..
3. Pull the extraction lever out and down to eject the
transceiver. If you are unable to use your finger to open
the lever, use a small flat-head screwdriver or other
similar tool to open the lever..
4. Hold the sides of the transceiver and carefully pull it away
from the cage socket..
5. Replace the cap on the cage socket and place the
removed transceiver into an antistatic bag..
Caution:Do
not force the
transceivers into
the cage slots.
If the transceiver
does not easily
slide in and click
into place, it may
not be aligned
correctly or may
be upside down.
If this happens,
remove the
transceiver, realign
it or rotate it and
slide it in again.
Note: Follow
proper fiber-
optic handling
procedures when
installing and
removing
transceivers to
ensure the devices
remain clean and
are not damaged.