Fortinet GPI-145 User manual

Fortinet Gigabit PoE Injector
GPI-145
QuickStart Guide

April 21, 2023
Copyright© 2023 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®,
and certain other marks are registered trademarks of Fortinet, Inc., in the U.S. and other jurisdictions,
and other Fortinet names herein may also be registered and/or common law trademarks of Fortinet. All
other product or company names may be trademarks of their respective owners. Performance and other
metrics contained herein were attained in internal lab tests under ideal conditions, and actual performance
and other results may vary. Network variables, different network environments and other conditions may
affect performance results. Nothing herein represents any binding commitment by Fortinet, and Fortinet
disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written
contract, signed by Fortinet’s General Counsel, with a purchaser that expressly warrants that the
identified product will perform according to certain expressly-identified performance metrics and, in such
event, only the specific performance metrics expressly identified in such binding written contract shall
be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same
ideal conditions as in Fortinet’s internal lab tests. In no event does Fortinet make any commitment related
to future deliverables, features or development, and circumstances may change such that any forward-
looking statements herein are not accurate. Fortinet disclaims in full any covenants, representations,
and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change,
modify, transfer, or otherwise revise this publication without notice, and the most current version of the
publication shall be applicable.
For Product License Agreement / EULA and Warranty Terms, visit:
https://www.fortinet.com/content/dam/fortinet/assets/legal/EULA.pdf
The Essentials
For a detailed Administration Guide, up-to-date Hardware
documentation and Reference Manuals, visit
https://docs.fortinet.com/
For contracts, licensing, product registration and account
management, contact FortiCare Support at
https://www.fortinet.com/support/contact
To access our Resource Center, Professional Services and
Technical Support Services, visit
https://www.fortinet.com/support
Fortinet Documents Library
Customer Service
Technical Support
Thank you for choosing Fortinet

Package Contents
Fortinet GPI-145 PoE Injector
GPI-145
1x Power Cable1x GPI-145
Installation
1
2
3
Power Connection
Device Connection
Network Connection
Caution: Do not use a cross-over Ethernet cable
Warning: Keep the GPI-145 away from excessive heat,
moisture and humidity. Ensure the GPI-145 remains free
from dust and vibration. Do not cover or block the airflow.
Note: There is no power switch on the GPI-145

Ports
1
1 2 3 4
2
3
4
Green: Device is connected
Flashing Green: Error detected
Amber: PoE Injector is on
Data Rate: 10/100/1000 Mbps, 2.5/5/10 Gbps
PoE Output: 55V DC Nominal, 60W Max
Data Pairs: 1/2 (-), 3/6 (+)
Spare Pairs: 7/8 (-), 4/5 (+)
PORT LED
DATA & POWER OUT (RJ-45)
DATA IN (RJ45)
Power Input 100 to 240V AC, 1.5A@100V AC, 50/60Hz
Cautions and Warnings
Environmental Specications
Ambient operating temperature: 0ºC to 40ºC
Refer to specific Product Model Data Sheet for Environmental Specifications (Operating Temperature,
Storage Temperature, Humidity, and Altitude).
Référez à la Fiche Technique de ce produit pour les caractéristiques environnementales (Température
de fonctionnement, température de stockage, humidité et l’altitude).
Safety
Associated Ethernet wiring shall be limited to inside the building.
Installation and removal of the PoE Midspan must be carried out by qualified personnel only.
Connect the PoE Midspan to a grounded AC outlet (100-240VAC), using a standard power cord with
ground (chassis) connection.
Regulatory Notices
Federal Communication Commission (FCC) – USA
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received; including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in residential installation. This equipment generates, uses, and can radiate
radio frequency energy, and if it is not installed and used in accordance with the instruction manual,
it may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
WARNING: Any changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment
European Conformity (CE) - EU
This is a Class B product. In a domestic environment, this product may cause radio interference, in
which case the user may be required to take adequate measures.
Note: The GPI-145 complies with 802.3bt Type 3 and is
backwards compatible with 802.3af/at

Fortinet.com