Fortinet IPSec VPN Version 4.1 User manual

www.fortinet.com
FortiClient End Point Security for Symbian OS
Version 4.1
USER GUIDE

FortiClient End Point Security for Symbian OS User Guide
Version 4.1
August 8, 2008
04-41000-0251-20080808
© Copyright 2008 Fortinet, Inc. All rights reserved. No part of this publication
including text, examples, diagrams or illustrations may be reproduced,
transmitted, or translated in any form or by any means, electronic,
mechanical, manual, optical or otherwise, for any purpose, without prior
written permission of Fortinet, Inc.
Trademarks
Dynamic Threat Prevention System (DTPS), APSecure, FortiASIC,
FortiBIOS, FortiBridge, FortiClient, FortiGate, FortiGuard, FortiGuard-
Antispam, FortiGuard-Antivirus, FortiGuard-Intrusion, FortiGuard-Web,
FortiAnalyzer, FortiManager, Fortinet, FortiOS, FortiPartner, FortiProtect,
FortiReporter, FortiResponse, FortiShield, FortiVoIP, and FortiWiFi are
trademarks of Fortinet, Inc. in the United States and/or other countries. The
names of actual companies and products mentioned herein may be the
trademarks of their respective owners.

Contents
FortiClient End Point Security for Symbian OS Version 4.1 User Guide
04-41000-0251-20080808 3
Contents
Introduction........................................................................................ 5
About FortiClient End Point Security for Symbian OS .................................. 5
Documentation................................................................................................... 5
Fortinet Knowledge Center ........................................................................... 5
Comments on Fortinet technical documentation........................................... 5
Customer service and technical support........................................................ 6
Installation.......................................................................................... 7
Supported software/hardware platforms......................................................... 7
Installing the FortiClient program.................................................................... 7
To install from the FortiClient SIS file ......................................................7
Starting the FortiClient program...................................................................... 7
To start the FortiClient program...............................................................7
Configuration...................................................................................... 9
Quick access to FortiClient application .......................................................... 9
FortiClient console.......................................................................................... 10
Viewing version number................................................................................. 12
System settings............................................................................................... 12
FortiClient Trayicon..................................................................................... 13
To enable or disable Trayicons..............................................................13
Logs.................................................................................................................. 13
To manage logs.....................................................................................13
Scan (Antivirus)............................................................................................... 14
To launch a manual AV scan of all files on the mobile device...............14
To scan files in a specified directory......................................................14
To set an AV scan schedule..................................................................14
To change Antivirus settings..................................................................14
To enable real-time protection...............................................................15
Quarantine........................................................................................................ 15
To view and manage the virus affected files..........................................15
To configure quarantine settings ...........................................................15
Call filter ........................................................................................................... 16
To view incoming call filter status..........................................................16
To reset rejected calls total....................................................................16
Changing call filter settings ......................................................................... 16
To set Call Filter mode...........................................................................17
To set the Default Action .......................................................................17

FortiClient End Point Security for Symbian OS Version 4.1 User Guide
404-41000-0251-20080808
Contents
Working with SMS reply messages ............................................................ 18
To manage SMS reply messages ......................................................... 18
Configuring call filter blacklist and whitelist................................................. 18
To configure the blacklist or whitelist..................................................... 18
Working with greetings................................................................................ 19
To record a greeting.............................................................................. 19
To import a greeting .............................................................................. 19
To manage greetings............................................................................. 19
SMS Antispam ................................................................................................. 20
To enable SMS Filter features............................................................... 20
To view the Spam log............................................................................ 20
Configuring SMS blacklist and whitelist ...................................................... 20
To configure the blacklist or whitelist..................................................... 20
Firewall............................................................................................................. 21
To enable firewall and set the protection level ...................................... 21
Encryption (Phone security)........................................................................... 22
To enable or disable encryption ............................................................ 22
Encryption settings...................................................................................... 22
To change encryption settings............................................................... 22
Encrypting contacts..................................................................................... 22
To encrypt contacts ............................................................................... 22
Working with encrypted contacts................................................................ 23
To view or call encrypted contacts ........................................................ 23
Working with encrypted SMS messages .................................................... 23
To access encrypted SMS messages................................................... 23
To encrypt an SMS message................................................................ 23
Working with Encrypted event logs (Call Record)....................................... 24
To access encrypted call records.......................................................... 24
Using the encrypted notepad...................................................................... 24
To use the encrypted notepad............................................................... 24
Working with encrypted files ....................................................................... 24
To work with encrypted files .................................................................. 24
Update .............................................................................................................. 25
To initiate an immediate update ............................................................ 25
To select the connection for updates..................................................... 25
To enable or disable the license renewal warning................................. 25
To set an update schedule.................................................................... 25
Index.................................................................................................. 27

Introduction
FortiClient End Point Security for Symbian OS Version 4.1 User Guide
04-41000-0251-20080808 5
Introduction
This chapter introduces you to FortiClient End Point Security for Symbian OS and
the following topics:
•About FortiClient End Point Security for Symbian OS
•Documentation
•Customer service and technical support
About FortiClient End Point Security for Symbian OS
The FortiClient End Point Security for Symbian OS is a PDA-based program to
protect your mobile devices running Symbian OS from virus and spam attacks.
The FortiClient program has the following features:
• Antivirus -- supports both on-demand and real-time AV scanning. It also
supports manual and automatic updates of AV engine and signatures. The
virus affected files are sent to the quarantine folder.
• Incoming Call Filter -- blocks calls that you are too busy to answer. You can
send blocked callers an SMS message or enable them to leave a message.
• SMS antispam -- blocks unwanted SMS messages and optionally blocks WAP
push messages.
• Firewall protection -- protects your Internet, such as HTTP and HTTPS, and
email traffic. (Not available on Nokia Symbian devices.)
• Phone Security -- encrypts your contacts and personal information to secure
your data in case your phone is lost or stolen.
• Logging -- records all AV detection and other events.
Documentation
In addition to this FortiClient End Point Security for Symbian User Guide, the
FortiClient online help provides information and procedures for using and
configuring the FortiClient program.
Fortinet Knowledge Center
The most recent Fortinet technical documentation is available from the Fortinet
Knowledge Center. The knowledge center contains short how-to articles, FAQs,
technical notes, product and feature guides, and much more. Visit the Fortinet
Knowledge Center at http://kc.forticare.com.
Comments on Fortinet technical documentation
You can send information about errors or omissions in this document or any
Fortinet technical documentation to [email protected]om.

FortiClient End Point Security for Symbian OS Version 4.1 User Guide
604-41000-0251-20080808
Comments on Fortinet technical documentation Introduction
Customer service and technical support
Fortinet Technical Support provides services designed to make sure that your
Fortinet systems install quickly, configure easily, and operate reliably in your
network.
Please visit the Fortinet Technical Support web site at http://support.fortinet.com
to learn about the technical support services that Fortinet provides.

Installation
FortiClient End Point Security for Symbian OS Version 4.1 User Guide
04-41000-0251-20080808 7
Installation
This section describes how to install the FortiClient program onto your mobile
devices.
The following topics are included in this section:
•Supported software/hardware platforms
•Installing the FortiClient program
•Starting the FortiClient program
Supported software/hardware platforms
Symbian S60 OS 7.0/8.0:
• Nokia models 3230, 6260, 6600, 6630, 7610, N70
Nokia Symbian S60 OS 9.x:
•allmodels
Installing the FortiClient program
Install the FortiClient program onto your mobile device from the FortiClient SIS
file.
To install from the FortiClient SIS file
1Download the FortiClient SIS file to your PC.
2On your PC, install your mobile device’s PC suite software.
3Connect your mobile device to your PC.
4Start the device’s PC suite software.
5Select Install Applications to install the FortiClient program.
6Follow the instructions on your PC and phone screens.
Starting the FortiClient program
The following procedure applies to Nokia 6620 cellular phone. For other cellular
phone models, the procedure may vary, but should be similar.
To start the FortiClient program
1On your mobile device, press Menu.
2Select FortiClient.

FortiClient End Point Security for Symbian OS Version 4.1 User Guide
804-41000-0251-20080808
Installation

Configuration
FortiClient End Point Security for Symbian OS Version 4.1 User Guide
04-41000-0251-20080808 9
Configuration
This section describes how to use the following FortiClient features:
•Quick access to FortiClient application
•FortiClient console
•Viewing version number
•System settings
•Logs
•Scan (Antivirus)
•Quarantine
•Call filter
•SMS Antispam
•Firewall
•Encryption (Phone security)
•Update
Quick access to FortiClient application
You can access the FortiClient application at any time, even while using another
application. Press the Edit key and * at the same time. The pop-up Shortcuts
menu provides access as follows:
After the FortiClient application exits, the device returns to the previous
application.
You can change the hotkey (default Edit + *) in Help&Support >
System Settings.
Console Enters the main menu of the FortiClient application. Select Exit
when finished.
Encrypt Console Enters the Encrypt menu of the FortiClient application. Select Exit
when finished.
Encrypt
or Encrypts your currently unencrypted data. Exits when finished.
Decrypt Decrypts your encrypted data. Exits when finished.

FortiClient End Point Security for Symbian OS Version 4.1 User Guide
10 04-41000-0251-20080808
Configuration
FortiClient console
When you start the FortiClient application from the Start menu or open the
FortiClient Console from the FortiTray, you see the FortiClient main menu. Each
icon represents a program feature, and in most cases if you tap the icon you see
the menu for the functions within the feature.
The table below shows the features and functions that you can access through the
FortiClient main menu.
Help&Support
Help View online Help.
System log View and clear system event logs. See “Logs”
on page 13.
System settings Configure general system options. See
“System settings” on page 12.
Register Register your FortiClient application.
About View information about this release of
FortiClient for Symbian.
Scan (Antivirus)
Real-time
Protection Tap icon to turn Real-time Protection on or off. Real-time Monitor scans files whenever they
are opened.
Full Scan Scan the file system of your device for viruses.
See “Scan (Antivirus)” on page 14.
Custom Scan Scan a selected folder in your device file
system. See “Scan (Antivirus)” on page 14.
Quarantine View the list of quarantined files. Restore or
delete quarantined files. See “Quarantine” on
page 15.
Virus Log View and clear antivirus logs. See “Logs” on
page 13.
Settings Go to Antivirus settings. See “Scan (Antivirus)”
on page 14.

Configuration
FortiClient End Point Security for Symbian OS Version 4.1 User Guide
04-41000-0251-20080808 11
Call Filter
Call Filter Tap icon to turn call filter on or off.
For more information, see “Call filter” on
page 16.
Call log View and clear call manager logs. See “Logs”
on page 13.
Voice Message View, hear and delete your messages.
Greeting Manage voice greeting files. See “Working with
greetings” on page 19.
Settings See “Changing call filter settings” on page 16.
SMS Filter (Antispam)
SMS Filter Tap to turn antispam monitoring on or off.
Spam log View and clear antispam logs. See “Logs” on
page 13.
Settings Select to set SMS Antispam filter options. For
more information, see “SMS Antispam” on
page 20.
Firewall
Firewall Tap to turn monitor on or off.
Firewall Log View and clear firewall logs. See “Logs” on
page 13.
Settings Set Firewall protection to Low, Normal or High.
For more information, see “Firewall” on
page 21.

FortiClient End Point Security for Symbian OS Version 4.1 User Guide
12 04-41000-0251-20080808
Configuration
Viewing version number
You can view the FortiClient program version number and copyright information by
selecting Help&Support > About from the FortiClient main menu.
System settings
Select Help&Support > System Settings to configure several options that affect
all operations:
Phone security Use data encryption. You can encrypt contacts,
SMS messages, call log, files and notes. See
“Encryption (Phone security)” on page 22.
Phone security Tap to encrypt or decrypt personal data. Lower
part of screen shows current status.
Browse Encrypted
Contacts View the encrypted contacts list. See
“Encrypting contacts” on page 22 and
“Working with encrypted contacts” on page 23.
Browse Encrypted
Messages View encrypted SMS messages. See “Working
with encrypted SMS messages” on page 23.
Encrypted Event
Logs View and clear phone logs. See “Logs” on
page 13.
File Encryption Encrypt files. Back up or restore encrypted
files. See “Working with encrypted files” on
page 24.
Notepad Keep encrypted notes. See “Using the
encrypted notepad” on page 24.
Settings See “Encryption settings” on page 22.
Update Update your Antivirus database. See “Update” on page 25.
Display TrayIcon Select On to provide indication of FortiClient application status
at all times. See “FortiClient Trayicon” on page 13.
Enable sound Select On to enable audio alert when a virus is found.
Default connection Select the default Internet connection. select the default
connection. If you do not always use the same connection,
select Always Ask.
Bill Prompt Select On to have your phone ask permission before
connecting to the Internet.
Dial Bill Prompt Select On to have your phone ask permission before dialing a
phone number.

Configuration FortiClient Trayicon
FortiClient End Point Security for Symbian OS Version 4.1 User Guide
04-41000-0251-20080808 13
FortiClient Trayicon
If Display Trayicon is enabled, four icons at the top right of your device screen
display the status of the FortiClient application at all times.
To enable or disable Trayicons
1Start the FortiClient application.
2Select Help&Support > System Settings.
3With the joystick, set Display Trayicon On or Off.
Logs
The FortiClient program logs events such as activities performed with the
program, virus detections, spam detections, and firewall detections. You can view
or delete the logs.
To manage logs
1From the FortiClient main menu, select Help&Support > System Log.
2Move the joystick right or left to select the tab for the type of log: Activity, Virus,
Call, Spam, Firewall.
3Do one of the following:
• To see the details of a log entry, select the log, then Options > Show Details.
• To delete a log entry, select the log, then Options > Delete Item.
• To delete all log entries, select Options > Delete All Items.
Send SMS Bill Prompt Select On to have your phone ask permission before sending
an SMS message.
Hotkey Enter a new hotkey combination. The default is Edit + *.
The hotkey provides access to the FortiClient application at any
time. See “Quick access to FortiClient application” on page 9.
Table 1: FortiClient Trayicons
Real-time Protection is enabled.
Incoming Call Filter is enabled
Active SMS Filter is enabled.
Active Firewall is enabled.

FortiClient End Point Security for Symbian OS Version 4.1 User Guide
14 04-41000-0251-20080808
FortiClient Trayicon Configuration
Scan (Antivirus)
The FortiClient program protects your mobile device from virus attacks. It supports
both manual and scheduled file scanning. Use manual scanning to scan files for
virus infections anytime you want. You can also schedule times to scan files. (See
“To set an AV scan schedule” on page 14).
If Quarantine is enabled (see “Quarantine” on page 15), infected files are moved
to the Quarantine area. Otherwise, infected files are deleted.
To launch a manual AV scan of all files on the mobile device
1From the FortiClient main menu, select Scan > Full Scan.
The scanning process starts. When it completes, the scanning result appears.
2Select OK.
To scan files in a specified directory
1From the FortiClient main menu, select Scan > Custom Scan.
2Navigate to the directory that you want to scan, using the joystick.
3Select OK.
The scanning process starts. When it completes, the scanning result appears.
To set an AV scan schedule
1From the FortiClient main menu, select Scan > Settings.
2Move the joystick to the right to select the Schedule Scan tab.
3Set the Scan Frequency and options to one of the following:
• Manual (no scheduled scans)
• Daily + Start Time
• Weekly + Start Time + Day
• Monthly + Start Time + Date
The schedule is activated when you exit the application.
To change Antivirus settings
1Select Scan > Settings.
2Using the joystick, set the following options:
Real-time Protection Set to On to scan files as they are accessed.
Protection Mode Fast - Does not scan installation package (.sis) files. This mode
puts the least demand on the mobile’s performance, but is less
secure.
Standard - Scans all files except installation package (.sis) files
larger than 200Kb. This provides good protection with moderate
demands on the mobile’s performance.
Security - Scans all files. This mode provides the best protection,
but is the most demanding of the mobile’s performance.
On Found Virus Select action to take when a virus is found:
Ask User - Ask user to choose deny access or delete
Deny Access - Block access to file
Delete - Delete or quarantine the file.

Configuration FortiClient Trayicon
FortiClient End Point Security for Symbian OS Version 4.1 User Guide
04-41000-0251-20080808 15
To enable real-time protection
1From the FortiClient main menu, select Scan.
2Select Real-time Protection to toggle feature on or off.
Quarantine
The FortiClient program quarantines the detected virus-affected files in a special
folder. You can view and manage the quarantined files.
You can set the quarantine size in 500KB increments. When the total size of
quarantined files exceeds the setting, FortiClient deletes the oldest quarantined
files automatically.
To view and manage the virus affected files
1From the FortiClient main menu, select Scan > Quarantine.
2Select a file and do one of the following:
• To view the file, select Options > Show Details.
• To restore a file to its original location, select Options > Recover.
• To restore a file to a different location, select Options > Recover to. Select the
destination.
• To delete the file, select Options > Delete File.
3You can also do any of the following:
• To delete all files in the folder, select Options > Delete All Files.
• To view quarantine statistics, select Options > Status.
The maximum quarantine size, amount used and number of files is displayed.
To configure quarantine settings
1From the FortiClient main menu, select Scan > Settings.
2Move the joystick to the right to select the Quarantine Settings tab.
3Using the joystick, set the following options:
Active Quarantine Set to On or Off.
Quarantine Size With the joystick, select and move the slider to the desired size of
quarantine space, then select again.

FortiClient End Point Security for Symbian OS Version 4.1 User Guide
16 04-41000-0251-20080808
Changing call filter settings Configuration
Call filter
Call filter blocks incoming calls that you are too busy to answer. You can
• block calls except for whitelisted callers, or callers in Contacts
• ignore calls (mute the ringer) from blocked callers
• send blocked callers the busy signal
• forward blocked calls to another number
• send blocked callers a text message
• enable blocked callers to leave a voice message
To view incoming call filter status
1From the FortiClient main menu, select Call Filter with the joystick.
If Call Filter is enabled, the Call Filter icon includes a green checkmark and the
following information is displayed:
2Using the joystick, highlight the Call Log icon. View the following information in the
lower portion of the screen:
3Using the joystick, highlight the Voice Message icon. The lower portion of the
screen shows the number of voice messages in total (Sum) and the number of
unread (New) voice messages.
To reset rejected calls total
1From the FortiClient main menu, select Call Filter.
2Select Options > Reset call counts.
Changing call filter settings
To modify all call filter settings, select Call Filter > Settings from the main
FortiClient menu. The settings page is divided into tabs:
You can move from tab to tab by moving the joystick right or left.
Scheme The selected mode. See Scheme in settings.
Action Mode The selected action on blocked calls. See Default Action.
Total rejected The total number of calls rejected.
Today The number of calls rejected today.
Recent phone The phone number of the most recent blocked call.
Recent date The date of the most recent blocked call.
Filter mode determines which callers are blocked
Default Action determines how to respond to a blocked caller
White List lists callers who should not be blocked
Black List lists callers who should always be blocked
SMS Templates contains SMS reply messages for use with Reply by SMS action
Greeting contains voice greetings for Answering Machine action

Configuration Changing call filter settings
FortiClient End Point Security for Symbian OS Version 4.1 User Guide
04-41000-0251-20080808 17
To set Call Filter mode
1From the FortiClient main menu, select Call Filter > Settings.
You are viewing the Filter Mode tab.
2Using the joystick, set the following options:
To set the Default Action
The Default Action determines what happens to blocked calls.
1From the FortiClient main menu, select Call Filter > Settings.
2Using the joystick, select the Default Action tab.
3Using the joystick, set the following options:
Active Incoming Call Manager On or Off
Scheme Select one of the following options:
Smart filter Reject incoming call if caller is not in the contact
list or whitelist, or is in the blacklist.
Reject blacklist only Reject call only if caller is in blacklist.
Accept whitelist only Reject call unless caller is in whitelist.
Reject all Block all incoming calls.
Empty Number Select Accept or Reject. This applies to callers that
do not provide their number.
Default Action Select how the Call Filter responds to blocked callers:
Mute the ringer Ignore incoming call.
Send busy tone Send busy signal to blocked caller.
Reply by SMS Send SMS reply message to blocked caller. Select the
message in the SMS Template option.
Answering machine Play a recorded greeting and ask the caller to leave a
voice message. Select the recorded greeting in the
Greeting Name option and adjust Voice Message Time
and Voice Message Storage options as needed.
Custom Forwarding Forward the call to another phone number. Select the
forwarding destination in the Custom Forward option.
The Default Action you select determines which of the following options are available.
SMS Template You selected Reply by SMS as Default Action.
Select the SMS reply message to send. To create and
manage SMS reply messages, see “Working with SMS
reply messages” on page 18.
Custom Forward You selected Custom Forwarding as Default Action.
Enter the phone number for forwarded calls.
Greeting Name You selected Answering Machine as Default Action.
Select the greeting you want to play for blocked callers.
To create and manage greetings, see “Working with
greetings” on page 19.
VoiceMsg time length You selected Answering Machine as Default Action.
Select the maximum length for recorded messages.
VoiceMsg storage You selected Answering Machine as Default Action.
Select whether voice messages are stored in phone
memory or on a storage card.

FortiClient End Point Security for Symbian OS Version 4.1 User Guide
18 04-41000-0251-20080808
Working with SMS reply messages Configuration
Working with SMS reply messages
If you selected Reply by SMS as the call filter default action, you need to select an
SMS reply message to send. If the pre-programmed messages are not
appropriate, you can modify them, delete them or create your own messages.
To manage SMS reply messages
1From the FortiClient main menu, select Call Filter > Settings.
2Using the joystick, select the SMS Templates tab.
3Do any of the following:
• To add a message, select Options > Add Item, enter the new message and
select OK.
• To edit a message, select it with the joystick, modify it and select OK.
• To set a message as the default, find it using the joystick and then select
Options > Set Default SMS.
• To delete a message, find it using the joystick and then select Options >
Delete Item.
• To delete all messages, select Options > Delete All Items.
Configuring call filter blacklist and whitelist
You can list undesired callers in the blacklist and permitted callers in the whitelist.
To configure the blacklist or whitelist
1From the FortiClient main menu, select Call Filter > Settings.
2Using the joystick, select the Black List or White List tab as needed.
3Do one of the following:
• To add a number, select Options > Add Item. Enter the caller name and
phone number, and select OK.
• To add a number that is in your contact list, select Options >
From Phonebook. Using the joystick, highlight the contact to add. Press the
joystick or select Options > Mark/Unmark > Mark and then select OK.
• To delete a number, select the number, then Options > Delete Item.
• To edit a number, select the number, then Options > Modify Item.
• To delete all numbers, select Options > Delete All Items.
Note: In both blacklist and whitelist entries, you can use the “*” wildcard character at either
the beginning or end of a phone number to replace multiple digits.
Note: The whitelist automatically includes the numbers in your contact list.

Configuration Working with greetings
FortiClient End Point Security for Symbian OS Version 4.1 User Guide
04-41000-0251-20080808 19
Working with greetings
If you selected Answering Machine as the call filter default action, you need to
record or import at least one greeting. You can also review your greetings, select
which one is the default, rename or delete greetings.
To record a greeting
1From the FortiClient main menu, select Call Filter > Greeting.
2Select Options > Record.
3Enter a name for the greeting.
4Select OK.
5Speak your greeting and select Back when finished.
To import a greeting
1From the FortiClient main menu, select Call Filter > Greeting.
2Select Options > Import.
3Select the sound file to use as a greeting and then select OK.
To manage greetings
1From the FortiClient main menu, select Call Filter > Greeting.
2Select a greeting.
3From the Options menu, select one of the following actions:
• Set default greeting - make this greeting the default one. The greeting plays.
• Record - record a new greeting. See “To record a greeting” on page 19.
• Play - listen to the greeting
• Rename - change greeting name
• Delete - delete this greeting
• Delete All - delete all greetings
• Import - import a greeting file. See “To import a greeting” on page 19.
Note: For the Import option, greetings must be .amr files saved in the Sounds directory.

FortiClient End Point Security for Symbian OS Version 4.1 User Guide
20 04-41000-0251-20080808
Configuring SMS blacklist and whitelist Configuration
SMS Antispam
Using the FortiClient program, you can block unwanted Short Message Service
(SMS) messages. You can also block unwanted phone numbers by blacklisting
them and accept numbers that are not in your contact list by whitelisting them.
The FortiClient program applies antispam rules in the following order:
• block unidentified caller (empty number)
• allow whitelisted caller
• block blacklisted caller
• block caller not in contact list (unknown number)
To enable SMS Filter features
1From the FortiClient main menu, select SMS Filter > Settings.
2Using the joystick, set the following options:
To view the Spam log
1From the FortiClient main menu, select SMS Filter > Spam log.
Configuring SMS blacklist and whitelist
You can list undesired SMS message senders in the blacklist and permitted
senders in the whitelist.
To configure the blacklist or whitelist
1From the FortiClient main menu, select SMS Filter > Settings.
2Using the joystick, select the Black List or White List tab as needed.
Enable SMS Filter Set On to block unwanted SMS messages, otherwise set
Off.
Filter WAP Push Msg Set On to also block WAP Push Msgs.
Action
Smart filter Reject message if sender is not in the contact list or
whitelist, or is in the blacklist.
Reject blacklist only Reject message only if sender is in blacklist.
Accept whitelist only Reject message unless sender is in whitelist.
Reject all Block all SMS messages.
When Finding Spam (Global edition only)
Delete Delete rejected messages.
Move to trash Move rejected messages to the Trash folder.
Note: In both blacklist and whitelist entries, you can use wildcard characters in phone
numbers. "?" replaces any single digit. "*" replaces multiple digits.