Foscam FI8903W Quick start guide

ShenZhen Foscam Intelligent Technology Co., Limited
www.foscam.com
How to upgrade firmware for MJPG camera
Suitable for MJPG camera: FI8903W, FI8904W, FI8905W, FI8907W, FI8908W,
FI8909W, FI8910W, FI8916W, FI8918W, FI8919W.
Plug in the Ethernet cable to upgrade firmware, not via wireless. Upgrade the
system firmware firstly and web UI secondly. Keep power on during the upgrading.
Updating with the wrong firmware may severely damage and/or break your camera.
Please make sure the firmware is right and update at your own risk.
Download firmware from http://www.foscam.com/down3.aspx and unzip
firmware.
Method 1: Upgrade firmware on IP Camera Tool
Step 1: Highlight and right click the camera and then go to Upgrade
Firmware.
Step 2: Put in the user and password of camera. The default user is ‘admin’ and
default password is blank.

ShenZhen Foscam Intelligent Technology Co., Limited
www.foscam.com
Step 3: Update System Firmware.
Click Upgrade System Firmware  select system firmware  click Open.

ShenZhen Foscam Intelligent Technology Co., Limited
www.foscam.com
Step 4: Upgrade Web UI.
Repeat step 1 and 2. Click Upgrade Web UI  select Web UI firmware  click
Open.
Step 5: You can check new firmware on Basic Properties.
Highlight and right click the camera and then go to Basic Properties.
Method 2: Update firmware on Upgrade Device Firmware.
Step 1: Log into camera click For Administrator  Upgrade Device
Firmware.
For Firefox, Google Chrome and Safari, click Device management  Upgrade
Device Firmware.
Step 2: Update System firmware.

ShenZhen Foscam Intelligent Technology Co., Limited
www.foscam.com
Click Browse  select system firmware  click Open  Click Submit.
Step 3: Update WebUI firmware.
Click Browse  select system firmware  click Open  Click Submit.

ShenZhen Foscam Intelligent Technology Co., Limited
www.foscam.com
Step 4: You can check new firmware on Device Info page.