FourStar 4893948120444 User manual

UPC#4893948120444
COMPUTER DESK
Please provide the following information:
1. Name of the store purchased from.
2. Date of purchase.
3. Item, Model, Style or SKU number listed on the instructions or box.
4. Description of the actual item in question.
5. Part number, Description of the part and quantity needed.
6. Copy of proof of purchase from an authorized retailer is required.
This information will help us fulfill your request efficiently.
LOT# DATE PURCHASED________________
/ /
ITEM: 11210850 DOT
Do not return to the store
STOP
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
THIS INSTRUCTION MANUAL IS PRINTED ON RECYCLED PAPER
USING EARTH FRIENDLY SOY BASED INK.
Do you have any questions ? Missing small parts or hardware?
If you need assistance with the assembly of your COMPUTER DESK
please contact our Customer Service Department by visiting
www.fourstari.com or emailing us at [email protected] or call us at
508-473-7688 or 800-639-3803.

SCREWDRIVER
ASSEMBLY TOOLS REQUIRED
RUBBER MALLET
Need Assistance? Call 800-639-3803 or visit www.fourstari.com
2
This unit is intended for use only with the
products and maximum weights indicated. Use
with other products or products heavier than the
maximum weights indicated may result in
instability causing possible injury. Furniture can
tip over or break if improperly moved. Have a
friend help to lift and carry the unit to it's new
location.
WARNING!!!
89 lbs. (40.3 kg)
30 lbs.
(13.6 kg)
30 lbs.
(13.6 kg)
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY
INSTRUCTIONS CAREFULLY. FOLLOW THEM STEP BY STEP.
CAUTION:
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL
PARTS. CARE SHOULD BE TAKEN IN THE UNPACKING
AND ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACES TO PREVENT DAMAGE
TO THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE
ASSEMBLY.

PARTS AND HARDWARE
BEFORE YOU BEGIN, PLEASE FOLLOW ASSEMBLY INSTRUCTIONS CAREFULLY. FOLLOW THEM STEP BY STEP.
Need Assistance? Call 800-639-3803 or visit www.fourstari.com
3
PARTS LIST
MEDIUM TUBE FOOT3
2
LONG TUBE1
1 PC 1 PC 1 PC
3.8 x 3.8 x 44cm 1.49” x 1.49” x 17.32” 3.4 x 3.4 x 21.4cm 1.34” x 1.34” x 8.42” 1.34” x 1.34” x 1.49” 3.4 x 3.4 x 3.8cm
SIDE CENTER SHELF
F
BOTTOM BACK PANEL RIGHT SIDE PANEL
DCROSSBAR
E
C
LEFT SIDE PANEL TOP PANEL WITH THE CAP INSERTED
B
A80 x 39.5 x 1.5cm
31.5” x 15.55” x 0.59” SIZE
GSIDE BOTTOM SHELF
2 PCS
1 PC 1 PC 1 PC 1 PC
QTY
1 PC 1 PC
71.4 x 23 x 1.2cm 28.11” x 9.05” x 0.47” 28.11” x 9.05” x 0.47” 71.4 x 23 x 1.2cm 53.4 x 3.5 x 1.2cm 21.02” x 1.37” x 0.47” 21.02” x 3.54” x 0.47” 53.4 x 9 x 1.2cm 29.5 x 23 x 1.2cm 11.61” x 9.05” x 0.47”
34 x 23 x 1.2cm 13.38” x 9.05” x 0.47”
PART NAME LINE-ART DRAWING
HARDWARE LIST
538MM SCREW
1.49” SCREW
PART NAME LINE-ART DRAWING QTY
12 PCS
3.8cm Flat Head 1.49” Flat Head
SIZE
8 WOODEN DOWEL
10 FOOT W/PIN
L BRACKET 20MM L BRACKET 0.79”
7
4 PCS 2 PCS 6 PCS
12MM SCREW 0.47” SCREW
6 4 PCS
1.2cm Flat Head 0.47” Flat Head 2 x 2cm 0.79” x 0.79” 0.6 x 3cm 0.23” x 1.18” 3cm x 1.3cm 1.18” x 0.51”
WHITE GLUE9 1 PCN/A

ASSEMBLY INSTRUCTIONS
Need Assistance? Call 800-639-3803 or visit www.fourstari.com
4
D
7
6
STEP 1
ATTACH L-BRACKETS (7) TO BOTH CROSSBARS (D) USING SCREWS (6).
STEP 2
ATTACH MEDIUM TUBE (2) TO INSERT CAP. DO NOT OVER TIGHTEN TUBE.
STEP 3
INSERT DOWELS (8) INSERT ONLY HALF OF THE DOWEL INTO THE TOP OF
SIDE PANELS (B) & (C) WITH GLUE (9).
STEP 4
INSERT GLUE (9) INTO THE DOWEL HOLES AND ATTACH SIDE PANELS (B) & (C)
TO THE TOP PANEL.
STEP 5
ATTACH CROSSBARS (D) TO SIDE PANEL (B) & (C) USING SCREW (5).
STEP 6
6.1 ATTACH L-BRACKET (7) TO TOP PANEL (A) USING SCREW (6)
6.2 ATTACH BACK PANEL (E) TO SIDE PANEL (B) & (C) USING SCREW (5)
STEP 7
ATTACH PLASTIC FOOT W/PIN (10) TO END OF SIDE PANELS (B) & (C)
WITH MALLET.
STEP 8
ATTACH SIDE CENTER SHELF (F) TO SIDE PANEL (C) USING SCREWS (5).
ATTACH LONG TUBE (1) TO MEDIUM TUBE (2). DO NOT OVER TIGHTEN
TUBE.
STEP 9
ATTACH SIDE BOTTOM SHELF (G) TO SIDE PANEL (C) USING SCREWS (5).
ATTACH FOOT (3) TO LONG TUBE (1).
DO NOT OVER TIGHTEN FOOT.
(D) CROSSBARS - 2 PCS
(7) L BRACKET 20MM (0.79”) - 2 PCS
UNFINISHED SIDE UP
(6) 12MM (0.47”) SCREW - 2 PCS
(2) 21.4CM (8.42”) MEDIUM TUBE - 1PC
2A

Need Assistance? Call 800-639-3803 or visit www.fourstari.com
5
STEP 1
ATTACH L-BRACKETS (7) TO BOTH CROSSBARS (D) USING SCREWS (6).
STEP 2
ATTACH MEDIUM TUBE (2) TO INSERT CAP. DO NOT OVER TIGHTEN TUBE.
STEP 3
INSERT DOWELS (8) INSERT ONLY HALF OF THE DOWEL INTO THE TOP OF
SIDE PANELS (B) & (C) WITH GLUE (9).
STEP 4
INSERT GLUE (9) INTO THE DOWEL HOLES AND ATTACH SIDE PANELS (B) & (C)
TO THE TOP PANEL.
STEP 5
ATTACH CROSSBARS (D) TO SIDE PANEL (B) & (C) USING SCREW (5).
STEP 6
6.1 ATTACH L-BRACKET (7) TO TOP PANEL (A) USING SCREW (6)
6.2 ATTACH BACK PANEL (E) TO SIDE PANEL (B) & (C) USING SCREW (5)
STEP 7
ATTACH PLASTIC FOOT W/PIN (10) TO END OF SIDE PANELS (B) & (C)
WITH MALLET.
STEP 8
ATTACH SIDE CENTER SHELF (F) TO SIDE PANEL (C) USING SCREWS (5).
ATTACH LONG TUBE (1) TO MEDIUM TUBE (2). DO NOT OVER TIGHTEN
TUBE.
STEP 9
ATTACH SIDE BOTTOM SHELF (G) TO SIDE PANEL (C) USING SCREWS (5).
ATTACH FOOT (3) TO LONG TUBE (1).
DO NOT OVER TIGHTEN FOOT.
WARNING!
AVOID CONTAMINATION, WASH YOUR
HANDS AFTER USING GLUE.
ONLY USE IN WELL-VENTILATED AREA.
AVOID CONTACT WITH EYES.
RINSE EYES IMMEDIATELY SHOULD
THE PRODUCT COME INTO CONTACT
WITH THEM.
MAY BE HARMFUL IF SWALLOWED.
USE UNDER ADULT SUPERVISION.
WARNING!
AVOID CONTAMINATION, WASH YOUR
HANDS AFTER USING GLUE.
ONLY USE IN WELL-VENTILATED AREA.
AVOID CONTACT WITH EYES.
RINSE EYES IMMEDIATELY SHOULD
THE PRODUCT COME INTO CONTACT
WITH THEM.
MAY BE HARMFUL IF SWALLOWED.
USE UNDER ADULT SUPERVISION.
(8) WOODEN DOWEL – 6 PCS
(9) WHITE GLUE - 1 PC
(9) WHITE GLUE - 1 PC

Need Assistance? Call 800-639-3803 or visit www.fourstari.com
6
STEP 1
ATTACH L-BRACKETS (7) TO BOTH CROSSBARS (D) USING SCREWS (6).
STEP 2
ATTACH MEDIUM TUBE (2) TO INSERT CAP. DO NOT OVER TIGHTEN TUBE.
STEP 3
INSERT DOWELS (8) INSERT ONLY HALF OF THE DOWEL INTO THE TOP OF
SIDE PANELS (B) & (C) WITH GLUE (9).
STEP 4
INSERT GLUE (9) INTO THE DOWEL HOLES AND ATTACH SIDE PANELS (B) & (C)
TO THE TOP PANEL.
STEP 5
ATTACH CROSSBARS (D) TO SIDE PANEL (B) & (C) USING SCREW (5).
STEP 6
6.1 ATTACH L-BRACKET (7) TO TOP PANEL (A) USING SCREW (6)
6.2 ATTACH BACK PANEL (E) TO SIDE PANEL (B) & (C) USING SCREW (5)
STEP 7
ATTACH PLASTIC FOOT W/PIN (10) TO END OF SIDE PANELS (B) & (C)
WITH MALLET.
STEP 8
ATTACH SIDE CENTER SHELF (F) TO SIDE PANEL (C) USING SCREWS (5).
ATTACH LONG TUBE (1) TO MEDIUM TUBE (2). DO NOT OVER TIGHTEN
TUBE.
STEP 9
ATTACH SIDE BOTTOM SHELF (G) TO SIDE PANEL (C) USING SCREWS (5).
ATTACH FOOT (3) TO LONG TUBE (1).
DO NOT OVER TIGHTEN FOOT.
(7) L BRACKET 20MM (0.79”) - 2 PCS
FINISHED SIDE POINTS UP
(5) 38MM (1.49”) SCREW - 2 PCS
(5) 38MM (1.49”) SCREW - 2 PCS

C
A
D
D
E
B
10
Need Assistance? Call 800-639-3803 or visit www.fourstari.com
7
STEP 1
ATTACH L-BRACKETS (7) TO BOTH CROSSBARS (D) USING SCREWS (6).
STEP 2
ATTACH MEDIUM TUBE (2) TO INSERT CAP. DO NOT OVER TIGHTEN TUBE.
STEP 3
INSERT DOWELS (8) INSERT ONLY HALF OF THE DOWEL INTO THE TOP OF
SIDE PANELS (B) & (C) WITH GLUE (9).
STEP 4
INSERT GLUE (9) INTO THE DOWEL HOLES AND ATTACH SIDE PANELS (B) & (C)
TO THE TOP PANEL.
STEP 5
ATTACH CROSSBARS (D) TO SIDE PANEL (B) & (C) USING SCREW (5).
STEP 6
6.1 ATTACH L-BRACKET (7) TO TOP PANEL (A) USING SCREW (6)
6.2 ATTACH BACK PANEL (E) TO SIDE PANEL (B) & (C) USING SCREW (5)
STEP 7
ATTACH PLASTIC FOOT W/PIN (10) TO END OF SIDE PANELS (B) & (C)
WITH MALLET.
STEP 8
ATTACH SIDE CENTER SHELF (F) TO SIDE PANEL (C) USING SCREWS (5).
ATTACH LONG TUBE (1) TO MEDIUM TUBE (2). DO NOT OVER TIGHTEN
TUBE.
5
A
F
D
1C
D
E
B
STEP 9
ATTACH SIDE BOTTOM SHELF (G) TO SIDE PANEL (C) USING SCREWS (5).
ATTACH FOOT (3) TO LONG TUBE (1).
DO NOT OVER TIGHTEN FOOT.
(10) FOOT W/PIN - 4 PCS
(1) 44CM (17.32”) LONG TUBE - 1PC
(F) SIDE CENTER SHELF - 1 PC
(5) 38MM (1.49”) SCREW - 2 PCS

Need Assistance? Call 800-639-3803 or visit www.fourstari.com
STEP 1
ATTACH L-BRACKETS (7) TO BOTH CROSSBARS (D) USING SCREWS (6).
STEP 2
ATTACH MEDIUM TUBE (2) TO INSERT CAP. DO NOT OVER TIGHTEN TUBE.
STEP 3
INSERT DOWELS (8) INSERT ONLY HALF OF THE DOWEL INTO THE TOP OF
SIDE PANELS (B) & (C) WITH GLUE (9).
STEP 4
INSERT GLUE (9) INTO THE DOWEL HOLES AND ATTACH SIDE PANELS (B) & (C)
TO THE TOP PANEL.
STEP 5
ATTACH CROSSBARS (D) TO SIDE PANEL (B) & (C) USING SCREW (5).
STEP 6
6.1 ATTACH L-BRACKET (7) TO TOP PANEL (A) USING SCREW (6)
6.2 ATTACH BACK PANEL (E) TO SIDE PANEL (B) & (C) USING SCREW (5)
STEP 7
ATTACH PLASTIC FOOT W/PIN (10) TO END OF SIDE PANELS (B) & (C)
WITH MALLET.
STEP 8
ATTACH SIDE CENTER SHELF (F) TO SIDE PANEL (C) USING SCREWS (5).
ATTACH LONG TUBE (1) TO MEDIUM TUBE (2). DO NOT OVER TIGHTEN
TUBE.
8
STEP 9
ATTACH SIDE BOTTOM SHELF (G) TO SIDE PANEL (C) USING SCREWS (5).
ATTACH FOOT (3) TO LONG TUBE (1).
DO NOT OVER TIGHTEN FOOT.
C
A
D
F
D
E
G
3B
5
To clean the computer desk, wipe
with soft, dry cloth. Apply a small
amount of cleaning solution to the
cloth if required. Do not use abrasive
cleaners in order to prevent the
scratching the surfaces.
(3) 3.8CM (1.49”) FOOT - 1 PC
(G) SIDE BOTTOM SHELF - 1 PC
(5) 38MM (1.49”) SCREW - 2 PCS

Do you have any questions ? Missing small parts or hardware?
If you need assistance with the assembly of your COMPUTER DESK
please contact our Customer Service Department by visiting
www.fourstari.com or emailing us at [email protected] or call us at
508-473-7688 or 800-639-3803 or write us at Fourstar Group Customer
Service, 26840 Fargo Ave. , Suite C, Bedford Heiahts, OH 44146.
9
FINISHED
Do not return to the store
STOP
This unit is intended for use only with the
products and maximum weights indicated. Use
with other products or products heavier than the
maximum weights indicated may result in
instability causing possible injury. Furniture can
tip over or break if improperly moved. Have a
friend help to lift and carry the unit to it's new
location.
WARNING!!!
89 lbs. (40.3 kg)
30 lbs.
(13.6 kg)
30 lbs.
(13.6 kg)
LIMITED 90 DAY WARRANTY
This product is warranted to be free from defects in material and workmanship for a
period of 90 days from date of purchase. Warranty is valid for the original purchaser
only; proof of purchase from an authorized retailer required. Warranty is limited to
replacement of missing and/or defective part(s). If a part is proven defective within the
term of this warranty, manufacturer will furnish a replacement part at no cost. No
assembly or labor included. This warranty is your sole remedy of product defect and
does not cover damage due to mishandling, neglect, moisture, misuse, abuse or
non-residential use. The manufacturer is not responsible for incidental or
consequential damages. This warranty gives you specific legal rights and you may also
have other rights which may vary from state to state.
Printed in Malaysia

STOP!
Missing Small Parts Or Hardware
Or Need Assistance?
No Need To Go Back To The Store!
The store where you made your purchase does not stock
hardware for this item. If you need hardware or small parts,
contact Customer Service. We will happily ship your part,
free of charge, within 48 hours
of your request.
Please provide the following information:
•Name of the store purchased from.
•Date of purchase.
•Item, model, style or SKU number listed
on the instructions or box.
•Description of the actual item in question.
•Part number, description of the part
and quantity needed.
This information will help use
fulfill your request efficiently.
Printed in Malaysia
Contact Customer Service:
Email us at [email protected] or visit
www.fourstari.com
Or Call Us At [phone] or [phone]
Hours of Operation are:
Monday – Friday 9am to 4pm Eastern Time
• Copy of proof of purchase from an
authorized retailer is required