FRCAMI R89 User manual

FRCAMI
R89 Wifi Camera
User Manual
Support: [email protected]
（Note: Please charge the camera for 5-6 hours before use）

Thanks for choosing our 2020 Upgraded small wireless camera.
Withlargecapacitybattery,thiscamcordercannotonlyuseas
spycamerabutalsoacarcamcorder.Ifyouhaveanyproblems
orsuggestion,pleasedonothesitatetocontactusonAmazonor
[e-mail].
Ⅰ.ProductDescription
FRCAMI

Button Description:
1. FHD 4K Len 2. Infrared Night LEDs 3. ON/OFF
4.Video/Reset(Longpressfor6seconds)
5. Photo / Turn off Indicator Lights(Long press for 6 seconds)
6.MicroSDCardPort7.USBChargePort
8.IndicatorLights9.RadiatingVents
10.WifiON/OFF
More Details:
1.ON/OFF:SlidethebuttontoONtoturnonthecameraandOFFto
turnoffthecamera.
2.MicroSDcardPort:InsertoneSDcardforstorage,ifthecardisbrand
new,formatitfirstbeforeusing.SupportsMAX128GSDcard(not
included).
3.Chargingport:Built-in3100mAhbattery.Whenyoureceivethe
camera,chargeitfor5-6hours.Itcanstandby30hoursandkeepworking
for15hours.Youcanchargeitwhilerecording.
4.WifiON/OFF:Wifimodeisthecameradefaultmode.Ifyouneed
NON-Wifi mode, you must insert a Micro SD card before use. Red and
Boot
Blueandredlightturnon
Localhotspotconnection
Redlightflashes,Bluelight’salwayson
Wifiremoteconnection
Blueandredlightsarealwayson
Non-WifiMode
Bluelight’salwayson
FRCAMI

blue lights will flash in Wifi mode and press the button again then the
camera will be in Non-Wifi mode and the blue light will be always on.
5.Photo:Turnonthecamera,presstheWifiON/OFFbuttontostandby
condition that the blue light will be always on, then press once the Photo
buttonandthecamerawilltakeapicture(PleaseinsertaMicroSDcard).
TurnofftheIndicatorLights:LongpressthePhotobuttonfor6
secondstoturnofftheindicatorlights.
6. Video: Turn on the camera, press the Wifi ON/OFF button to standby
conditionthatthebluelightwillbealwayson,thenpressoncetheVideo
button,thebluelightwillflashthenthecamerawillstartrecordingvideos;
pressagaintostoprecording(PleaseinsertaMicroSDcard).
Reset:Longpressthevideobuttonfor6secondsuntiltheindicator
lightgoesofftoresetthecameratofactorysettings.
Ⅱ. Product Features
1.WifiCamera:Thiscameraonlysupports2.4Gnetworkhotspotand
Wificonnection.
2.WideField:Builtin170°wideanglelens.
3.HighDefinition:UseFHD4Kcameralens.
4.NightVision:Capturesgreatandclearimagesandvideosatlightwith
built-in4IRnightLEDs.
5.MicroSDCardSaving:SupportMax128GSDcard(NOTincluded)to
save the recordings.
FRCAMI

6. Motion Detection: You can enable this function in APP Sancam. When
a moving object is detected, the camera will take a picture and push alerts
toyourphone.
7. Loop Recording: When the SD card is full, it will auto overwrite the
oldestfilesandsavenewrecordings.
8.PhoneAPPSupport:FREEandsafeAPPSancam,youcandownload
fromiOSAPPStoreorAndriodGooglePlay.
Ⅲ.APPSettingsInstruction
1.Downloadtheapp“Sancam”
ForAndroidsystem:Pleasesearch“Sancam”onGooglePlay.
ForiOSsystem:Pleasesearch“Sancam”onAppStore.
Besides,youcanscanthecorrespondingQRcodebelowtodownloadit.
AndroidSystemiOSSystem
2.Turnonthecamera:
SlideON/OFFtoONandwait1-2minutes.Whentheblueandred
indicatorlightsareon,thecamerawillautomaticallytransmitWifi
hotspot.Usuallytheprocessmaytake1-3minutesduetothesignal
strength, please keep your patience.
FRCAMI

3. Connect the camera’s Wifi hotspot via your phone:
Tap the WLAN settings on your phone, search for this camera’s Wifi
hotspot(namedwiththeUIDstickedatthebackofcamera),thenclickit
to match your phone. Please refer to the below pics.
FRCAMI

4. Set Local Connection (Point-to-Point live streaming mode):
4.1Openthe“Sancam”APP,itwillautomaticallysearchthecamera
andthentapConfirmtoconnectitandmakeitonline.
Ifitdoesn’tautomaticallyaddthecamera,pleasetapthe“+”icon
inAPPSancamformanualadding.Pleaserefertothebelowpicture.
FRCAMI

4.2 Click LAN search device to find the camera then tap （Add）to
enternextstep.Pleaserefertothebelowpicture.
4.3OryoucanaddthedevicemanuallybyenteringthedeviceID
anddefaultpassword8888(youcanchangethepasswordinapp
setting).
FRCAMI

Tips: Under the local connection, the camera's WIFI hotspot is valid
within10meters.Whenyourphoneisoutoftherange,itwill
disconnectandyouwillnotbeabletowatchtheliveview.
5. Set Remote Connection:
TaptheSettingicon>>>Tap“Networkconfiguration”>>>Select
yourrouter’sWi-Finame>>>EnteryourWifi’spassword>>>Tap
“Confirm” to finish setting remote connection. Please refer to the
below pics.
FRCAMI

6.MotionDetection
Openthe“Sancam”apponyourphone>>>Tap“Setting”icon>>>
Tap“Motiondetectionset”tosetupandchoosethesensitivityofthe
motiondetection.Pleaserefertothebelowpicstosetupthis
function.Youcanalsosetalarminformation.
FRCAMI