Freelap Swim Belt User manual

Welcome to Freelap World!
Congratulation in thinking outside the box and
providing your team with a tool that will truly
maximize their training experience!
GET STARTED !
TECHNICAL DATA
Make sure Bluetooth and location are enabled on your mobile device.
Swim Belt :
Battery: CR1632 | Battery life: 4'000h of training
FxSwim :
Battery: CR2032 | Battery life: 400h
Memory: 48 hours of continuous training (1 file possible)
Tx H2O Pro :
Battery: 3.7V 5Ah LiPo rechargeable | Battery life: 200h
Select FxSwim device type.
Open MyFreelap app.
The first screen you see is your workout calendar.
Create your new workout by pressing the sign at the top.
QUICK GUIDE
Press START.
Fill in the details, choose a start list and/or a distance list (optional).
You are ready to receive timing data and heart rate!
For more information, please contact your
distributor. You can find the list on
www.freelap.ch/freelap-contact
FIND ALL THE INFORMATION ABOUT YOUR FREELAP
PRODUCTS AND OUR DOCUMENTATION ON OUR
WEBSITE : WWW.FREELAP.CH
© Freelap SA 2002 - 2019 - All rights reserved
Freelap is a registered trademark of Freelap SA.
FREELAP SA
Av. D.-Jeanrichard 2A - CH-2114 Fleurier - Switzerland
Phone : [phone] / E-mail : [email protected]


.
SETTING UP YOUR FREELAP TIMING KIT ISFASTAND EASY!
SWIM BELT & SWIM VESTTAKETHESTART
EXAMPLEOF USE
FXSWIM
Put onyour Swim Vest overyour Swim Belt.
Attach the belt to your chest withthe elasticband.
Moisten the electrodes of the belt.
The FxSwim transmits the data as soon as it detects the
heartbeats. If after 1min it has not detected anything, it turn off.
Wait 1min so that the electrodes detect the heartbeats. If
after 1min it has not detected anything, it will turn off
automatically.
To take the start, place yourself on the starting block and wait at least 10sec in
this zone. As soon as you leave the transmitter detection field, the stopwatch of
your FxSwim starts automatically.
> Example ina swimmingpool of 50m
> Example in a swimming pool of 25m
Turn onthe FxSwim by pressing the central buttonfor 2sec
(it flashes 3 times to signal the current ignition).
Place it inthe small pocket onthe back of your Swim Vest.
TX H2O PROFINISH
To switch on the transmitter simply press the "ON"
button until the LED flashes.
Place the TxH2O Pro onthe starting block.
Lap times over 50m
To turn off the FxSwim press the central button for 2 seconds. Then remove your
Swim Belt to stop sendingthe heart rate.
To view the detailed chart of your training: Press 3short presses on the FxSwim
button. From your mobile device, click on your workout and then on"Download"
and on"Chart".
Lap times over 50m
LET’S GET STARTED!
MYFREELAP APP
Freelap timing system is based on a
mobile app, so you will need to
download the MyFreelap app on
yourmobile device.
Available on
DOWNLOAD AND INSTALL MYFREELAP APP
DOWNLOAD CREATE ACCOUNT ACTIVATION
LOGIN DONE!
Download the
MyFreelap app
on your mobile device
Click on "Register" to
create your account: enter
your email and choose a
password
Go to your email
to confirm your registration
to MyFreelap app
Go back to the
app and log in
Your app is now
ready to go!