Freespirit Adventure Series User manual

ADVENTURE SERIES
PREMIUM TENT
ADVENTURE SERIES
PREMIUM
INSTRUCTION MANUAL

2
CONTENTS
Before using this product, please consult the
instruction manual to ensure proper use.
INSTRUCTIONS
1. Instructions........................................................................... 3
2. Product Specifications.................................................. 3
3. Product Frame..................................................................... 3
4. Main Properties and Characteristics ................... 4
INSTALLATION
1. Installing Your Roof Top Tent...................................... 4
2. Setting Up Your Roof Top Tent.................................. 6
3. Tips & Tricks .......................................................................... 7
4. Important Information ................................................... 7
5. Troubleshooting.................................................................. 7
5. Tools ........................................................................................... 8

3
INSTRUCTIONS
PRODUCT FRAME
The Adventure Series Premium semi-automatic roof top tent, can easily be set up by 2
people. It sets up and folds down in seconds, with a patented gas strut-assisted opening
mechanism. Enjoy the outdoor life in whatever weather!
PRODUCT SPECIFICATIONS
A. The frame consists of aluminum alloy parts, with strong nylon joints.
B. Double layer silver coating treatment for outer tent material, offers better heat
insulation and waterproofing.
C. The top-quality mattress provides a comfortable sleeping experience.
D. Telescoping aluminum alloy ladder is removable and can hold up to 330lbs (150kg).
Fly: 21OD rip-stop polyester PU 3000mm with 3-layer silver coating
Body: 3 layers of 150D poly-oxford
Floor: 210D poly-oxford PU 3000mm Frame: Aluminum Alloy
Cover: 600g heavy duty PVC floor
Crossbar Static Load Capacity: 330lbs single point; 660lbs entire shell
STRUCTURE
M49
Inner L52x W85 x H52 in
Outer L52 x W85 x H9 in
Weight: 145 lbs
M55
Inner L80x W55 x H47 in
Outer L85 x W60 x H9 in
Weight: 164 lbs
Top U-Shaped Pole
Back U-Shaped Pole
Front U-Shaped Pole Base
Gas Strut-Assisted
Opening Mechanism

4
1. INSTALLING YOUR ROOF TOP TENT
1. You must have roof racks correctly
fitted to your vehicle, following the
rack manufacturer’s instructions,
before installing the Roof Top tent.
2. Lift the Roof Top tent beside the
vehicle, ensuring it is centered over
the racks, and that it will distribute
the weight evenly over the vehicle’s
roof.
3. Stand back and double check that
the tent is centered both front-to-
back, and side-to-side, and that all
doors can still operate without risk of
damage to the vehicle.
4. Slide the M8X50 hexagon bolts into
the rails, so that one is on each side of
your cross bar (see Picture 1). Be sure
to replace the rubber end caps when
finished. Using the washers and star
knobs, evenly tighten until secure.
Be sure to check them periodically to
ensure a tight fit.
MAIN PROPERTIES & CHARACTERISTICS
1. Pull down the strap to fold down the roof tent.
2. Release the strap, the roof tent will be set up by gas strut.

5
Picture 1 Picture 2
Rack
U-Shape stator
U-Shape stator
M8X50 Hexagon
Plastic Nut
M8 flat washer M8 arc washer Rail Cap
Rail

6
2. SETTING UP YOUR ROOF TOP TENT
1. Remove the tent PVC cover.
3. Then the roof tent will open
automatically.
5. Keep pulling the webbing till you get
the adjustable rubber hook.
2. Release the adjustable rubber hook
from the fixed button.
4. Close the roof tent by pulling the
webbing.
6. Fix the rubber hook onto the fixed
button and close the roof tent cover.

7
3. TIPS & TRICKS
IMPORTANT INFORMATION
TROUBLESHOOTING
• Always ensure the tent is dry before packing away.
• Keep the rail of the base clean and dry.
• Ensure ladder is always locked into place and angled away from the vehicle.
• Make sure the tent is packed down completely and secured before driving.
1. When packing away the tent, ensure there are no other objects in the tent (like
sleeping bag, pillow).
2. Don’t put heavy objects on the tent when the tent is closed.
3. Clean and treat your tent and PVC cover at least once a year and only use
approved products.
4. Check the connection points of the tent to the car; ensure all points are properly
locked.
5. Please don’t jump inside of, or make other similar movements that may possibly
damage the tent.
6. Always keep the tent closed when driving.
7. Use caution when opening the tent during heavy winds.
8. If there is abnormal noise when setting up or folding down the tent, please check
the rails and all connection joints immediately.
IF THE TENT STOPS WORKING
1. Check if the fabric is caught in any of the support poles or gas struts.
2. Check if any of the gas struts are leaking. If so, replace them immediately. Uninstall
the strut by using a screwdriver to take out the screws on both sides of the strut
(see photos below).

8
TOOLS
Accessory Pack
6xL 100 Cross Screwdriver
6mm L-Shape Hexagonal Wrench
6mm L-Shape
Hexagonal Wrench
M6 T-Shape
Slider Block
M6 Stainless Steel
Flat Washer
M6 Spring
Washer
5mm L-Shape Hexagonal Wrench
8-10 Open Spanner