12
•A damaged cord can cause electric shocks. NEVER use the appliance if it is
damaged,fallenorshowsamalfunction,orifthecordorplugaredamaged.
•Immediately switch off the appliance and pull out the plug: after use or
when the appliance is NOT in use, if the appliance does not function
properly and when cleaning the appliance.
•NEVERuseseparatetimersorremotecontrolsystems.
•ALWAYS place the appliance on a solid and flat base, such as a kitchen counter or table, so that the
appliance will not move or turn over.
•The appliance may also be used outdoor, on the following conditions:
•The power cord should regularly be examined for signs of damage. If the cord is damaged, do not
use the appliance anymore, but immediately return it to your sales point.
•The appliance must be connected to a socket-outlet having an earthed contact 230V.
•The appliance must be supplied through a residual current device (RCD) having a rated residual
operating current not exceeding 30 mA.
•After use, ALWAYS store the appliance indoors in a dry place.
•In case an extension cord is used:
•Only use an extension cord with a diameter that is minimum equal to the diameter of the
appliances’ cord and an integrated earthed plug, and with a higher power than the appliance.
•Take all necessary measures to prevent someone from tripping over the extension cord.
•NEVER let the cord hang over the edge of the table or the counter.
•NEVER place the power supply cord near heat sources such as cookers, heatings or ovens.
•Only use the appliance on the mains voltage as indicated on the identification label.
•This appliance is only suited for indoor household use, and not for professional use.
2. BEFORE THE FIRST USE
•Remove all packaging and stickers.
•Keep packaging away from children.
•First check your appliances for possible damages. If it is damaged, do NOT use the appliance but bring
it back to your sales point.
•Clean the appliance as described under ‘Cleaning’ (point 4) before the first use.
•Attach the power cord to the appliance.
•ATTENTION: the thermostat button should always be on the upper side.
•The appliance is now ready for use.
•Ensure that the voltage marked on the appliance is the same as your main voltage.
3. OPERATION OF THE APPLIANCE
•Completely unroll the power cord, plug in the thermostat (2) into the appliance and plug in the
appliance in a 230 V socket.
•Then turn the thermostat knob onto the chosen position.
•ATTENTION: the appliance will now get hot. Only touch the thermostat knob and the handles.
•You can now start to bake.
•ATTENTION: do not use sharp objects on the baking plate, this could damage the non stick coating.
TIP: to maintain the non stick coating we advise to grease the baking plate regularly with baking oil.