STANDARD WIFI SETUP
1Connect the camera’s AC power adapter and plug it
into an outlet.
2 Wait 1–2 minutes until the camera’s light ashes WHITE.
3Using a phone or tablet, connect to the WiFi network
“ADC-V622 (XX:XX:XX)” where XX:XX:XX are the last six
digits of the camera’s MAC address, which is located on the
back of the device near the power cord.
4Go to http://FPsetup.
5Follow the on-screen instructions to add the camera to
the WiFi network. The LED will be solid GREEN when the
connection is complete.
To ensure a suicient WiFi signal, complete these steps with the camera near
its nal location but prior to mounting.
Menu
Call-Out Button
Volume Down
(Menu Scroll
)
Volume Up
(Menu Scroll
)
To pair with Bluetooth, push the Menu button and use the
Volume buttons to scroll to Bluetooth Mode.
6Log into your my.frontpoint.com account
using a laptop or a desktop.
If this is the rst camera connected to your
Frontpoint account, click the Video tab to
add your camera to your account. Select the
camera from the video device list or type in its
MAC address to begin adding the camera. The
camera’s MAC address is located on the back
of the camera near the power cable.
If you already have a camera connected to your
Frontpoint account, click Settings, then scroll
down to click Add Video Device.
7 Follow the on-screen instructions to nish
adding the camera. You may congure camera
settings from the Settings tab under Video.
FOR ADDITIONAL HELP, CALL CUSTOMER CARE AT 1-877-602-5276
1
3
34
